Who is this choice relevant to?

Mixing a folk demo in a quiet room

You mainly mix existing vocal and acoustic instrument tracks, and sound leakage isn’t an issue. Bear in mind that headphones alone don’t give you a complete picture of your mix; Sound On Sound explains the value of checking it on a second playback system.

A musician who also records

If you record vocals or acoustic instruments with a close-miked microphone, consider whether sound from your headphones could leak into the recording. RTINGS highlights this as a consideration with open-back headphones.

Mixing with a limited listening setup

If you’re working through a laptop or audio interface, check not only that the plug fits, but also that the output can drive your chosen model to a usable level. Focusrite explains why impedance isn’t the only factor.

What should you consider when choosing?

Open-back, wired

Choose this if: you mainly mix existing vocal and instrument tracks, and there’s no active microphone or anyone nearby who might be disturbed by sound leakage.

Bear in mind: open-back models offer little isolation and let sound escape; an open design doesn’t guarantee an accurate mix.

Closed-back, wired

Choose this if: you also want to use the same headphones when recording vocals or guitar with a close-miked microphone.

Bear in mind: fit and listening volume affect leakage; a closed-back design won’t automatically prevent spill into your recording.

Semi-open, wired

Choose this if: you want to compare a semi-open model, such as the AKG K240 Studio, for listening to and mixing existing tracks.

Bear in mind: the semi-open label doesn’t prove there’s enough isolation for recording with a microphone; test for leakage in your own setup.

What to consider What to look for when buying Who should pay particular attention?
Vocals, balance and stereo positioning Compare familiar recordings and check your mix on another playback system too, as Sound On Sound recommends when mixing on headphones. When I’m balancing vocals and acoustic parts, I don’t want to rely on just one pair of headphones. Around 42% of consumers prioritise mix assessment.
Sound leakage while recording Using your own microphone and normal listening volume, test whether the headphone monitoring can be heard in the recording; even a closed-back model can leak sound. If I’m recording with a close-miked microphone, I want to stop the monitoring from bleeding into the recording. Around 25% of consumers prioritise recording isolation.
Connection and driveability Check the plug, any adaptor you may need and the specifications of your headphone output; Focusrite points out that impedance alone doesn’t determine the level you can achieve. If I’m working through a laptop or interface, I want to know that the plug fits and that the output can drive the model to a usable level. Around 17% of consumers prioritise connection and driveability.
Fit and maintenance If possible, try the headphones during a realistic session and check which earpads or cables can be replaced on the exact version you’re considering. For longer sessions, I want a comfortable fit that lasts and to know which parts can be replaced. Around 16% of consumers prioritise long-term comfort and maintenance.

Common buying mistakes

  • Choosing open-back headphones as your only pair for recording with a microphone

    Open-back designs let sound escape, which can reach a nearby microphone when you’re recording vocals or quiet instruments.

    First decide whether you’ll only be mixing existing tracks or recording too, then test for leakage with your own microphone and listening volume.

    If you want one pair of headphones for both mixing and recording with a microphone, you may still need a second pair with better isolation.

  • Assuming a plug that fits means the headphones are compatible

    A plug can fit physically, but the combination of headphones and output may not deliver the usable level you need.

    Check the exact headphone version and the specifications of your own laptop or interface before you choose.

  • Mixing a folk demo using just one pair of headphones

    Bass and stereo positioning can sound different through headphones than they do through speakers.

    Use familiar reference recordings and, when you can, check your mix on another playback system too.

  • Assuming semi-open means guaranteed isolation

    The semi-open label doesn’t prove that sound at your listening volume will stay out of a microphone recording.

    Judge the model on its own merits for mixing, and test recording leakage separately in your own setup.

Brands and models to consider

Sennheiser

The open-back HD 490 PRO is worth comparing if you mainly mix existing tracks and don’t need isolation.

  • Sennheiser says the HD 490 PRO comes with two sets of earpads, designed for producing or mixing. The manufacturer also lists replaceable earpads and a cable that can be connected on either the left or right.
  • The open-back design isn’t suitable if sound leakage would be a problem during recording. Claims about accuracy come from the manufacturer; they aren’t an independent assessment of your mix.

beyerdynamic

The open-back DT 900 PRO X is a wired option to compare for mixing through a laptop or audio interface.

  • beyerdynamic lists an impedance of 48 ohms for this model, along with detachable cables and 3.5 and 6.35 mm connection options.
  • Sound On Sound describes both the DT 900 PRO X and the closed-back DT 700 PRO X as relatively heavy. Fit is personal, and the manufacturer’s claim that the model works with different devices doesn’t guarantee a suitable level from your output.

AKG

Compare the semi-open K240 Studio if leakage isn’t an issue, or the closed-back K371 if you also record with a microphone.

  • AKG recommends the K240 Studio for mixing and playback, and lists a detachable cable. The Dutch product information for the K371 describes a closed-back design, replaceable earpads and detachable cables.
  • These features apply to the models mentioned, not to every AKG pair of headphones. Check how well the K371’s earcups seal in your recording setup.

Audio-Technica

The open-back ATH-R70x is an alternative for critical mixing if your headphone output can drive it appropriately.

  • Audio-Technica lists a detachable cable and an impedance of 470 ohms for the ATH-R70x.
  • The manufacturer describes the model as suitable for mixing and mastering; check how it works with your output. The open-back design doesn’t provide isolation for recording with a microphone.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I use open-back headphones while recording vocals?

For this kind of recording, compare a suitable closed-back model first, as open-back headphones let more sound leak towards a microphone. Test with your microphone and listening volume to see whether the closed-back model provides enough isolation too.

How do I connect studio headphones to my audio interface?

Check the output on your exact interface, the plug on your headphones and whether you need an adaptor. For the fourth-generation Scarlett 2i2, Focusrite lists a 6.35 mm headphone output; also check whether it can drive your chosen model to a usable level.

Are one pair of headphones enough to mix my folk demo well?

Don’t rely on headphones as your only check when judging bass and stereo positioning. Sound On Sound discusses the value of a second playback system; when you can, check your mix another way too.

How can I stop myself turning the volume up during long mixing sessions?

Keep the volume modest and take breaks. The World Health Organization links the risk of hearing damage to both sound level and duration, and gives 80 dB for an average of up to 40 hours per week as an example; this isn’t a measured level for your headphones.

Can I return headphones bought online if they don’t fit comfortably?

Many online purchases generally come with a 14-day cooling-off period, but there are exceptions. The Dutch government outlines the rules for distance selling; check the terms for your specific purchase, and don’t assume the same rules apply when buying from a private seller.