Drum editor in a noisy room
If you're editing takes while noise in the room interferes with monitoring, you can compare closed-back models and check how well they seal around your head.
When editing drum recordings at a standing desk, closed-back wired studio headphones are a better choice if background noise is a problem or you also monitor through microphones. Open-back headphones are an option for checking spatial positioning and balance in a quiet room where sound leakage is not an issue. Then check that the cable routing, connection and fit work for you when standing. Manufacturers' claims about sound and comfort are not comparative measurements.
If you're editing takes while noise in the room interferes with monitoring, you can compare closed-back models and check how well they seal around your head.
If you also want to assess stereo positioning and balance, consider open-back headphones if sound leaking out isn't a problem. Sennheiser positions the open-back HD 490 PRO for mixing in a quiet working environment.
If you change posture and work with an audio interface, it's worth checking the cable routing, connection and fit while standing. Manufacturers of models such as the beyerdynamic DT 770 PRO X, Sennheiser HD 490 PRO and Audio-Technica ATH-M50x describe different cable options.
First decide whether you need isolation while recording; then check that the cable and connection suit your standing workstation and interface.
| What to consider | What should you check? | Who is this most relevant to? |
|---|---|---|
| Editing details | Compare the same drum take at a comfortable volume and listen for quiet passages and transitions. Don't choose based solely on a quoted frequency range. | When editing drum takes, I want to be able to assess quiet passages and edit transitions. Around 33% of consumers prioritise checking editing details. |
| Isolation | Test how the earcups fit around your head and over any glasses you wear. A closed-back design alone doesn't tell you how well the fit blocks sound. | If background noise bothers me or I also monitor through microphones, a good seal is my main priority. Around 27% of consumers prioritise isolation. |
| Cable and wearing comfort | Measure the route between your interface and listening position while standing. Make sure the cable doesn't pull, hang in your way or create an awkward route to walk around. | When I move between my interface and workstation while standing, I want to work without the cable getting in the way. Around 20% of consumers prioritise freedom of movement and wearing comfort. |
| Connection and maintenance | Check the plug, any adapter, impedance and full model variant for your interface. Also check which replacement parts are available for that exact model. | With my existing interface, I want to be sure the connection and variant are right and that compatible parts are available. Around 20% of consumers prioritise compatibility and maintenance. |
Open-back headphones let sound through. That makes them a different choice from headphones you use when you need isolation during recording.
For that combination, choose a suitable closed-back model. Compare open-back headphones separately for work in a quiet room.
These are different variants. beyerdynamic specifies a detachable mini-XLR cable and 48 ohm impedance for the PRO X; the separate DT 770 PRO is an 80-ohm model.
Before buying, check the full model name, plug, cable design and connection to your interface.
The distance to your interface changes when you adjust your position at a standing desk. The cable lengths supplied also vary by model.
Measure and try the full cable route in your standing working position, making sure there's no strain on the connection or awkward route to walk around.
The closed-back DT 770 PRO X and DT 770 PRO 80 ohm are separate models to compare for monitoring.
Sennheiser positions the open-back HD 490 PRO for mixing and assessing spatial positioning in a quiet working environment.
The closed-back ATH-M50x is worth comparing if the different cables supplied are relevant to your workspace.
According to AKG, the closed-back K371 has a foldable design and is intended for use in the studio and on the go.
Sony describes the closed-back MDR-7506 as reference headphones for recording and studio use.
Check the headphone output on your interface and the plug on the exact variant. For example, beyerdynamic specifies a 3,5mm plug with a 6,3mm adapter for the DT 770 PRO X. Then check the cable route while standing, too.
Before buying, check which replacement parts are available for the specific model. Sennheiser lists washable, replaceable ear pads for the HD 490 PRO; beyerdynamic lists parts for the separate DT 770 PRO 80 ohm. Follow the cleaning instructions for your model.
For online purchases from a business, a 14-day cooling-off period applies in many cases, according to the Dutch government. If a product is faulty, contact the seller; there is no fixed statutory warranty period in the Netherlands. The cooling-off period and your legal rights if a product is faulty are separate from any manufacturer's warranty. Check the applicable terms and exceptions.
Yes. According to Arboportaal, the information portal of the Ministry of Social Affairs and Employment, employers must provide hearing protection when the daily noise exposure exceeds 80 dB(A); above 85 dB(A), employees are required to wear it. These limits relate to workplace exposure and are not measured output levels for any of the headphone models mentioned here.