Editor mixing choir recordings in a quiet room
You mainly edit existing choir recordings in a quiet space and want to assess vocals and stereo positioning critically.
If you mainly work in a quiet room, open-back wired headphones are well suited to critically assessing vocals and stereo positioning. If you also listen while recording or in a shared space, a closed-back model is a better choice for limiting sound leakage. Sound On Sound explains that open-back headphones can leak sound. For long editing sessions, check the fit and connection too, and listen to the final stereo mix on speakers where possible. Using two screens does not change your audio requirements.
You mainly edit existing choir recordings in a quiet space and want to assess vocals and stereo positioning critically.
You also listen while microphones are active or when the room is shared, so limiting sound leakage may be more important.
You wear headphones for extended periods and weigh up fit, cable management and replaceable parts against the level of isolation you need.
First decide between open-back listening in a quiet room and closed-back listening when sound leakage is a concern. Then consider the fit, cable and connection that suit your workspace.
Choose these when: you want to assess vocals and stereo positioning critically in a quiet, separate room.
Keep in mind: sound can leak out, and external noise can get in more easily.
Choose these when: you work near other people or listen during a recording and want to reduce sound leaking into microphones or the surrounding space.
Keep in mind: a closed-back design does not automatically make the sound suitable for decisions about spatial mixing.
Choose these when: you are deliberately looking for a middle ground and some leakage is acceptable in your space.
Keep in mind: the term ‘semi-open’ alone does not tell you how much sound a particular model blocks.
| What to consider | What to check before buying | Who it matters most to |
|---|---|---|
| Vocal detail and stereo image | Compare open-back models using familiar choir recordings, and check the final mix on speakers too, where possible. | If I’m assessing the positioning of choir voices in a quiet room, I want to hear the detail without making leakage my main concern. Around 33% of consumers put vocal detail and stereo image first. |
| Sound leakage | Consider whether you listen while microphones are active, and check the fit around your ears on closed-back models. | When I’m listening near active microphones or other people, I want to avoid my headphones disturbing others or having sound picked up in a recording. Around 27% of consumers prioritise limiting leakage. |
| Comfort and maintenance | If possible, try the model on with your usual glasses. Also check whether the ear pads can be replaced and how the cable is routed. | During long editing sessions, I want the headphones to stay comfortable and the cable and ear pads to be practical. Around 20% of consumers start with comfort and maintenance. |
| Connection to your setup | Check the output on your computer or audio interface, the plug or adapter you need, and how the cable will run across your desk. | If I want to connect my headphones to my existing computer or interface output, the plug and cable need to suit my setup. Around 20% of consumers put connection first. |
An open back can let sound leak into the room, where it may be picked up during an active recording.
Choose a closed-back model for recording; use open-back headphones when leakage is not an issue.
The manufacturer offers the beyerdynamic DT 770 PRO in 32-, 80- and 250-ohm versions for different types of audio source.
Check the exact version and the output on your computer or audio interface before ordering.
Headphones reproduce the left and right channels differently from speakers.
Check the final mix on speakers too, if you have them available.
These examples apply to the product lines mentioned and are not recommendations of entire brands.
The DT 770 PRO is closed-back, while the DT 990 PRO is open-back. The manufacturer offers the DT 770 PRO in 32-, 80- and 250-ohm versions.
The closed-back ATH-M40x is a wired monitoring option when isolation matters.
Sennheiser positions the open-back HD 490 PRO for mixing and mastering in environments where leakage is acceptable.
The MDR-7506 is a reference headphone for recording and studio work.
According to the manufacturer’s Dutch product page, the closed-back K371 is designed to provide isolation and has a foldable design.
The headphones below have connection or workspace features that may be useful for editing. Check that each model suits your listening needs and connection; a product listing alone does not make a model a studio reference.
No image available
May be useful if you want to listen via the listed audio cable; check that the 3.5mm connection suits the output on your computer or interface.
The product description states that passive wired use is possible without battery power, and gives a battery life of up to 60 hours.
No image available
Check that the USB-A connection is compatible with your editing computer and that the headset suits your listening needs.
The product description lists Bluetooth, connection to two devices and a battery life of up to 36 hours.
No, the number of screens does not determine how many audio connections you need. Connect your headphones to the output used by your editing software, and check the plug, any adapter you may need and the cable route across your desk.
Use them to check the detail, and assess the final balance and stereo positioning on speakers too, where possible. Sound On Sound notes that headphones reproduce the left and right channels differently from speakers.
Keep the volume no louder than necessary and limit your exposure time. The World Health Organization gives 80 dB for a maximum of 40 hours per week as an example; this does not mean that a particular volume setting on every computer will produce 80 dB at your ear.
Do not assume so: closed-back headphones are not automatically hearing protection. Arboportaal outlines obligations for exposure to noise at work, including providing hearing protectors when the daily dose exceeds 80 dB(A). This is not a general product requirement for someone editing choir recordings at home.