Critical editing of choir recordings
You mainly work on the balance and detail in existing recordings and can usually listen in a quiet room. Sennheiser describes the HD 560S as an open-back model for analytical listening.
Start with wired studio headphones that match the headphone output on your laptop or audio interface: the analogue models discussed here don’t need their own separate mains connection. A closed-back model is a more practical choice if you’ll also be listening near microphones; for editing in a quiet, separate room, you could also consider an open-back or semi-open model. Check the connection, fit and how well your own output can drive the specific version you’re considering.
You mainly work on the balance and detail in existing recordings and can usually listen in a quiet room. Sennheiser describes the HD 560S as an open-back model for analytical listening.
You want to use the existing headphone output without adding a separate mains-powered headphone amplifier. Do check that your laptop or interface can drive your chosen headphones adequately; Focusrite points out that this depends on more than impedance alone.
You also use your headphones near microphones or work alongside other people. Focusrite notes that closed-back headphones can help reduce sound leakage into microphones.
Suitable for: listening near microphones, recording singers or working in a shared space.
Bear in mind: the seal and fit vary from person to person; also check that your output can drive the specific version adequately.
Suitable for: critical editing in a quiet, separate room.
Bear in mind: open-back earcups don’t block out your surroundings like a closed-back model; check the volume with your own output.
Suitable for: mixing or playback in a quiet room if you want to compare a semi-open alternative.
Bear in mind: don’t assume that semi-open earcups will prevent sound leakage during recording.
| What to consider | What should you check? | Who should give this more weight? |
|---|---|---|
| Assessing balance and detail | Compare a familiar track at a comfortable volume and, where possible, check your mix on another playback system too. | If I want to assess the detail and balance of a choir recording carefully, listening in a quiet room comes first. Around 34% of consumers give this listening assessment top priority. |
| No extra mains connection | Check the headphone output, plug or adapter, cable length and usable volume. | If I want to use the existing output without a separate mains-powered amplifier, I check that my laptop or interface can drive the combination well. Around 33% of consumers prioritise using their existing output. |
| Reducing sound leakage | Look for a closed-back design and check that the earcups fit you well if you use the headphones near microphones. | When I’m listening near microphones or working in a shared space, I want to reduce leakage without assuming that every closed-back model seals in the same way. Around 20% of consumers give reducing leakage top priority. |
| Comfort and maintenance | Try the headphones on if possible and check whether the ear pads or cable can be replaced on the specific version. | For long editing sessions, I want a comfortable fit that lasts and to know which parts I can replace. Around 13% of consumers put comfort and maintenance first. |
Usable volume depends on both the headphones and the output they’re connected to. The label or a single specification won’t, on its own, tell you whether the combination suits the way you work.
Check the exact model and, if possible, try it with your own laptop or interface at a comfortable volume.
If the existing output isn’t powerful enough to be useful, you may need a different output or an amplifier. Check this before assuming your current setup will be sufficient.
When monitoring recordings, sound leakage may be a bigger concern than when editing in a quiet room. Focusrite notes that closed-back headphones can help reduce leakage into microphones.
First decide whether you’ll use the headphones during recording. If so, compare a well-fitting closed-back model too.
Headphones give you different spatial cues from loudspeakers. Sonarworks discusses this difference when assessing aspects such as width and reverb.
Where possible, check the final balance on another playback system too; you don’t automatically need to buy extra equipment to do this.
The wired, closed-back DT 770 PRO is an option for monitoring recordings. Compare the 32-, 80- and 250-ohm versions with the output you use.
According to the manufacturer, the wired, closed-back ATH-M40x is designed for tracking and mixing.
The open-back HD 560S is a wired alternative for critical listening in a quiet room.
The semi-open K240 Studio is a wired option for mixing and playback when recording isolation isn’t the main priority.
Sony describes the MDR-7506 as wired reference headphones for recording and studio work.
The wired analogue models discussed here connect to a suitable headphone output and don’t need their own separate mains connection. Check that your laptop or interface provides enough volume; the power supply for that device is a separate matter.
Before buying, check the plug size, any adapter you may need and the cable length. According to the manufacturer, the 80-ohm beyerdynamic DT 770 PRO has a 3.5 mm plug with a 6.35 mm adapter. Audio-Technica lists detachable cables for the ATH-M40x; for maintenance, check which parts are compatible with your exact model.
Listen at a comfortable volume and take breaks. The World Health Organization points out that both sound level and listening duration matter; headphones that are driven properly are no reason to listen at high volume for long periods.
For a standard online purchase by a consumer, you generally have a statutory cooling-off period of up to 14 days after delivery, subject to applicable exceptions. You also have statutory rights against the seller if a product is faulty; these are separate from any manufacturer’s warranty. ACM ConsuWijzer explains the cooling-off period and guarantees. Check the terms that apply to your purchase and return.