Who is this buying guide for?

Bass balance editor

You edit bass guitar and want to check your low-end decisions using familiar recordings and speakers. Sonarworks explains why you should also check a headphone mix on speakers.

Editor in a shared space

You work with audible background noise or record at the same time, and want to know how much sound the headphones let in or leak out. RTINGS discusses open-back and closed-back designs for mixing and recording.

Standing-session worker

You stand or change position regularly. In that case, a comfortable fit and a cable that suits the distance to your audio output both matter.

What should you look for when buying?

Open-back, wired design

Choose this if: you work in a quiet room and sound leakage isn’t a problem.

Bear in mind: open-back models offer very little isolation from ambient noise and can leak sound.

Closed-back, wired design

Choose this if: ambient noise bothers you or you record as well as edit.

Bear in mind: the seal and perceived bass can change depending on the fit, for example when wearing glasses.

The breakdown below covers consumers choosing studio headphones for this type of work, with each person’s main buying priority at the centre.

Consideration What to look for when buying Who is this important for?
Assessing bass Compare familiar bass passages and check important mix decisions on speakers too. When editing bass guitar, you don’t simply want to hear more low end; you want a balance you can also check on speakers. Around 33% of consumers whose top priority is reliable bass reproduction fall into this group.
Isolation and leakage Weigh up ambient noise and sound leakage against the benefits of an open-back design. If ambient noise is distracting or you’re recording at the same time, keeping leakage to a minimum matters. Consumers whose top priority is isolation make up around 27% of the group.
Fit and cable reach Try the headphones while standing and compare the cable length with the distance to your audio output. If you regularly change position while working, you’ll want a fit and cable that don’t restrict your movement. For around 27% of consumers, wearing comfort while working standing up is the top priority.
Connection and replacements Check the output, any adapter, cable construction and exact model variant. Those who first want to check whether the headphones fit their existing audio output and whether parts can be replaced share this priority with around 13% of consumers.

Common buying mistakes

  • Treating the frequency range as proof of accurate bass

    The lower figure in the stated range doesn’t tell you how evenly the low end will sound with your fit. A change in the seal can also affect what you hear.

    Listen to familiar bass passages, pay attention to the fit and check important decisions on speakers too.

  • Choosing an open-back model without considering the room

    Open-back models offer little isolation and can leak sound. A closed-back model can reduce ambient noise and leakage, but the seal also depends on the fit.

    First decide whether you’ll be working in a quiet room and whether a microphone will be picking up sound while you record.

  • Checking the cable or impedance variant too late

    Cable construction can vary between models and variants. Impedance alone doesn’t tell you whether your output will provide enough volume; Sonarworks points out that sensitivity matters too.

    Check the full model name, connection and included cable before you order.

Relevant brands to consider

Sennheiser

The HD 490 PRO is an open-back option for a quiet room; the HD 480 PRO is closed-back if isolation matters.

  • Sennheiser lists replaceable ear pads and a cable that can be connected on either the left or right for the HD 490 PRO.
  • RTINGS describes the HD 480 PRO as offering passive isolation, but notes that it does little to block low-frequency rumble.

beyerdynamic

The open-back DT 900 PRO X and closed-back DT 770 PRO differ in design and cable setup.

  • beyerdynamic lists the DT 900 PRO X with an impedance of 48 ohms and detachable 1.8 m and 3 m cables.
  • The DT 770 PRO comes in different impedance variants; according to beyerdynamic, the classic DT 770 PRO has a fixed cable. Check the full model name and variant carefully.

AKG

The closed-back K371 is an option for comparing isolation and different cable configurations.

  • AKG Netherlands lists three detachable cables and replaceable ear pads.
  • AKG’s description of its sound as accurate is a manufacturer’s claim; judge for yourself how the headphones fit and sound on your head.

Audio-Technica

The closed-back ATH-M50x is worth considering if you want to compare different included cable lengths.

  • Audio-Technica Europe lists a 1.2 m straight cable, a 3 m straight cable and a 1.2–3.0 m coiled cable.
  • Describing the bass as accurate is a manufacturer’s claim, not an independent measurement.

Sony

The closed-back MDR-M1 is a model to compare if isolation and replaceable parts matter to you.

  • Sony Netherlands lists two detachable cables and replaceable ear pads.
  • A stated range of 5 Hz–80 kHz doesn’t, on its own, tell you how accurately you’ll hear bass.

Products on Joybuy

This section features over-ear headphones with a wired listening option; check whether they suit your mixing workflow.

Sennheiser MOMENTUM 4 Wireless, black

Sennheiser MOMENTUM 4 Wireless, Black

The product description mentions a wired listening option and passive use without a battery; that alone doesn’t confirm accurate bass for mixing.

The product name mentions noise cancelling, 60-hour battery life and four microphones.

View on Joybuy

Frequently asked questions

Can I use the stated frequency range to choose headphones for bass?

No. A range such as 5 Hz–40 kHz doesn’t tell you how evenly the low end will sound on your head. Compare the sound with familiar references, pay attention to the seal and check important mix decisions on speakers too.

How do I connect studio headphones to my workstation?

Check the plug and any 6.3 mm adapter against the output you use, and measure how much cable length you need while standing. Audio-Technica lists three cables with the ATH-M50x; according to beyerdynamic, the classic DT 770 PRO has a fixed cable.

How can I protect my hearing during long editing sessions?

Don’t listen any louder than necessary. Thuisarts advises keeping the volume at a sensible level when listening to music; this is general health advice, not a product-specific safety statement.

What rights do I have as a Dutch consumer when buying online?

When you buy online as a consumer from a business, you generally have a 14-day cooling-off period, according to the Dutch government. You’re also entitled to a product that is fit for purpose; according to the Dutch government, the Netherlands has no fixed statutory guarantee period. The exact terms also depend on the specific purchase, for example whether you’re buying as a business.