Who should consider these Wi-Fi options?

Housemates who watch TV together

They mainly want documentaries to stream reliably in the shared viewing area, so they check the available internet speed by the TV. Netflix Help Centre links its recommended speed to the selected picture quality.

Residents with rooms spread across the house

They also get weak Wi-Fi outside the living room and want to know whether moving the router, using a cable or adding Wi-Fi access points could help. The Consumers’ Association recommends testing the connection; TP-Link warns that coverage and throughput vary.

Housemates who are online at the same time

They stream while others use the internet and want to know whether the shared connection and equipment placement can handle this. Product specifications for multiple devices are no guarantee of performance in this particular student house.

What should you look for in a Wi-Fi router?

What to consider What should you check? Who is this important for?
A reliable stream by the TV Test the connection where you watch and, if possible, compare it with a wired test. Netflix Help Centre recommends at least 5 Mbps for Full HD (1080p) and 15 Mbps for UHD (4K). These are recommendations for the connection, not guarantees of router performance. If I mainly watch on the shared TV, I want to know whether the connection is good enough right there. Around 36% of consumers would prioritise a reliable stream in the viewing area when making this choice.
Coverage in several rooms Test the connection where housemates use the internet and see whether you can position the router centrally or run a cable to an additional Wi-Fi access point. If Wi-Fi in both my room and the living room matters, I want to know where the signal drops out. Around 29% of consumers would make coverage in several areas their top priority.
Being online at the same time Test during a busy period, check the internet speed included in your package and count how many devices could be connected by cable. If my housemates are online while I’m watching, I want to allow for the shared use of the connection. Around 21% of consumers would prioritise simultaneous use.
Cost and management Check what your provider’s existing equipment can already do, which connection settings are needed and who will install updates. If I want to avoid unnecessary equipment and extra upkeep, I’ll first check whether changing the placement or settings could solve the problem. Around 14% of consumers would make cost and management their main consideration.

Common buying mistakes

  • Confusing a higher Wi-Fi speed with a faster streaming speed

    A router’s stated radio speed is not the same as the internet speed the TV receives. Your broadband connection or the Wi-Fi signal where you watch could be the limiting factor.

    Test the connection by the TV and, where possible, use a wired test by the router before choosing equipment.

  • Assuming a mesh coverage claim means the signal will pass through every wall and floor

    Actual coverage depends on factors including distance, obstacles and placement. The number of units in a set doesn’t, by itself, tell you how Wi-Fi will perform in your house.

    Test the relevant areas, check how many units are included in the box and consider where you can place them.

  • Choosing a DSL modem router without checking your connection type

    A built-in DSL modem won’t automatically replace equipment for a different type of internet connection.

    Check your connection type and ask your provider which settings you need before replacing the modem.

Brands to compare

TP-Link

The Archer AX55 is an example of a standalone router, while the Deco X50 is a mesh option for a setup with multiple Wi-Fi access points.

  • TP-Link lists Wi-Fi 6 and OFDMA for the Archer AX55, and mesh expansion and optional Ethernet backhaul for the Deco X50.
  • TP-Link warns that actual coverage and throughput vary. The stated specifications alone can’t predict reception in a student house.

ASUS

The RT-AX57 is a standalone Wi-Fi 6 router that can be expanded later using AiMesh.

  • According to ASUS, the RT-AX57 supports OFDMA, WPA3 and AiMesh.
  • Expansion requires a compatible additional device. The stated wireless speeds don’t tell you what speed the TV will get in your house.

FRITZ!

The FRITZ!Box 7530 AX is worth considering if the house has a suitable DSL connection and you also need to replace the modem.

  • FRITZ! lists Wi-Fi 6, mesh and a built-in DSL modem for this model.
  • The DSL function doesn’t automatically make this model suitable for a different connection type. Check your connection and settings with your provider.

Wi-Fi products at Joybuy

This selection includes standalone Wi-Fi routers for one central location and mesh sets with two or three units for Wi-Fi in multiple areas. Test results and the available placement options can help you decide which setup is right for your house.

ASUS RT-AX52 AX1800 AiMesh dual-band Wi-Fi router

ASUS RT-AX52 AX1800 AiMesh

A standalone router to compare if one central location can reach the TV and the main rooms.

Dual-band (2.4 GHz and 5 GHz), Wi-Fi 6, three Gigabit Ethernet ports, OFDMA, MU-MIMO and WPA3. Expansion with AiMesh requires a compatible router.

View at Joybuy
TP-Link Deco X50 mesh set with three units, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A mesh set to compare if tests show weak Wi-Fi in several areas.

Three units, dual-band Wi-Fi 6, OFDMA, MU-MIMO, optional Ethernet backhaul and three Gigabit Ethernet ports per unit. Multiple units need space and power.

View at Joybuy
ASUS RT-AX52 Pro AX3000 dual-band Wi-Fi router

ASUS RT-AX52 Pro AX3000

A standalone router to compare if one central location could provide enough coverage.

Dual-band Wi-Fi 6, Gigabit Ethernet, OFDMA, MU-MIMO and AiMesh. Expansion with AiMesh requires a compatible router.

View at Joybuy
TP-Link Deco XE75 mesh set with three units, tri-band Wi-Fi 6E

TP-Link Deco XE75 (3 units)

A mesh set to compare if Wi-Fi needs attention in several areas and there’s room for multiple units.

Tri-band Wi-Fi 6E on 2.4 GHz, 5 GHz and 6 GHz, with three Gigabit Ethernet ports per unit and WPA3. The three-unit set needs space and power in several locations.

View at Joybuy
TP-Link Deco X50 mesh set with two units, dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack)

A mesh set to compare if you need Wi-Fi in two areas and have places to put the units.

Two units, dual-band Wi-Fi 6, OFDMA, MU-MIMO, optional Ethernet backhaul and three Gigabit Ethernet ports per unit. Multiple units need space and power.

View at Joybuy

Frequently asked questions

How can you tell whether a new router will stop buffering?

Compare a wired test with the connection where you watch, and test again while your housemates are online. If the broadband connection itself is slow, a different Wi-Fi router won’t fix it. If the Wi-Fi signal is weak, moving the router, using a cable or adding a Wi-Fi access point may be more targeted options.

What internet speed do you need for streaming?

Netflix Help Centre recommends at least 5 Mbps for Full HD (1080p) and 15 Mbps for UHD (4K) per stream. These are recommendations for the connection; the speed by the TV may also depend on the Wi-Fi signal and how your housemates are using the internet.

Can you use your own router in the Netherlands?

Yes. According to ACM ConsuWijzer, consumers are free to choose their own router. Ask your provider for the settings for your connection if needed. If you’re also replacing a modem, first check that the device is compatible with your connection type.

What should you keep on top of after installation?

Check who installs firmware updates and change the default login details. VeiligInternetten recommends keeping your own router up to date. If you’re using equipment supplied by your provider, ask how updates are managed.

Which CE marking should you check on a Wi-Fi router?

Check that the exact model supplied carries the correct CE marking. The Dutch Authority for Digital Infrastructure explains that radio equipment meeting the applicable requirements carries the CE marking. A document for a different hardware version doesn’t prove that the version supplied is the same.