Who is this choice relevant to?

Listeners with existing passive speakers

If you want to stream choral recordings in a large living room, it’s worth matching your amplifier to your existing or planned speakers. WiiM describes the Amp and Amp Pro as models for passive speakers.

Listeners who want to fine-tune their room

If you want to measure or adjust settings from a regular listening position, the features available vary by model. Check whether any measuring equipment or software needs to be bought separately.

Listeners with multiple sources

If you want to use sources such as TV audio or a turntable as well as streaming, it’s best to compare the inputs and controls on the exact model in advance. Yamaha, NAD and Marantz list different connection options for the models discussed.

What should you look for when choosing?

First, check that the amplifier is a good match for your speakers and suits your everyday streaming habits. Then consider which room adjustments and extra connections you really need.

What to consider What to look for Who is this important for?
Speaker compatibility Check whether your speakers are passive, and compare impedance and power ratings using the same measurement basis. Manufacturers don’t always specify the same test conditions. If I want to use my existing speakers in a large room, I need to know whether the amplifier is a good match. Around 36% of consumers prioritise speaker matching.
Fine-tuning for your listening position Compare the measurement and adjustment features offered by each model. Check whether a microphone, licence or calibration kit needs to be bought separately. If your main aim is to fine-tune the sound at a regular listening position, look at the measurement and correction options available. Around 29% of consumers make room tuning their top priority.
Streaming controls Check that your chosen service, app and playback devices are supported. WiiM lists AirPlay 2 support for the Amp, but not the Amp Pro. If I want to control my usual service or playback method directly, I check support for the exact model. Around 21% of consumers give streaming controls top priority.
Additional sources Check that the TV connection you need and any phono input are available. Yamaha doesn’t list HDMI ARC for the R-N800A; NAD lists phono for the C 700 V2. If you also want to connect a TV or turntable and avoid surprises about extra equipment you might need, compare the connections and included accessories in advance. Around 14% of consumers prioritise additional sources and the equipment needed to use them.

Common pitfalls

  • Comparing wattage figures directly

    Power figures may be quoted under different test conditions, so they don’t necessarily describe the same measurement. A number on its own won’t tell you whether an amplifier is a good match for your speakers.

    Compare impedance, the number of channels and the measurement basis, then check the speaker manufacturer’s recommendations.

  • Confusing the WiiM Amp and Amp Pro when it comes to AirPlay 2

    According to WiiM, the Amp supports AirPlay 2, but the Amp Pro doesn’t. This difference could be decisive if that’s how you listen.

    Check the full model name and support for your preferred playback method before choosing.

  • Assuming room correction is fully included

    For Dirac Live on the NAD and Bluesound models discussed, the manufacturers list separate items you’ll need.

    Check whether the licence and calibration microphone or kit are included with the specific version.

    Using the Dirac Live features mentioned may require a separate software licence and calibration equipment.

  • Assuming every model has the same TV connection

    According to Yamaha, the R-N800A doesn’t have HDMI ARC, while Marantz lists HDMI eARC for the MODEL M1. So check that your TV output and amplifier input are compatible.

    Look up the connections on the exact model and decide in advance how you want to connect it to your TV.

Brands to compare

Yamaha

The R-N800A combines MusicCast with traditional hi-fi connections, including phono and optical TV audio.

  • Yamaha specifies 100 W + 100 W at 8 ohms for this model, measured over 20 Hz–20 kHz at 0,07% THD.
  • Yamaha doesn’t list HDMI ARC. Descriptions of YPAO’s acoustic benefits are manufacturer claims, not independent listening tests for choral music.

WiiM

The Amp and Amp Pro are compact streaming amplifiers for passive speakers.

  • WiiM lists 60 W per channel at 8 ohms and 120 W per channel at 4 ohms for both models.
  • According to WiiM, the Amp supports AirPlay 2, but the Amp Pro doesn’t. Power ratings alone don’t determine whether a model is a good match for your speakers.

Bluesound

The POWERNODE N331 combines BluOS with HDMI eARC for connecting to a TV.

  • Bluesound specifies 100 W per channel at 8 ohms in stereo mode.
  • For Dirac Live on the N331, Bluesound lists a separate software licence and calibration kit. This isn’t independent evidence of an audible improvement.

NAD

The C 700 V2 combines BluOS with a display, MM phono input and HDMI eARC.

  • NAD lists 80 W per channel for the V2.
  • For optional Dirac Live, NAD lists a separate licence and calibration microphone. Specifications for the original C 700 don’t automatically apply to the V2.

Marantz

The MODEL M1 combines HEOS with AirPlay 2 and HDMI eARC.

  • Marantz lists 100 W per channel for this model.
  • Check that HEOS includes the services you use and that the connections suit your other sources. The power rating alone doesn’t confirm that it’s a good match for your speakers.

Streaming amplifiers at Joybuy

Related products will be available soon.

Frequently asked questions

Can I connect my existing speakers directly?

That depends on the type and specifications of your speakers. WiiM describes connecting passive speakers to the Amp and Amp Pro; also check the impedance and manufacturer’s recommendations for your speakers.

How do I set up room correction for my listening position?

Follow the instructions for your chosen model. For RoomFit, WiiM recommends, among other things, using it in a quiet room and placing a microphone at ear height in your listening position. This doesn’t guarantee that every recording will sound better. For Dirac Live on the POWERNODE N331, Bluesound lists items that must be bought separately.

What additional equipment should I check for?

Check whether your preferred correction software and measuring equipment are included. NAD and Bluesound list separate items for the Dirac Live features discussed; exactly what’s included may vary by version.

What requirements must a streaming amplifier meet to be sold in the Netherlands?

The Dutch government states that electrical and electronic equipment must comply with the applicable European rules. For equipment that must carry the CE marking, the manufacturer applies the mark after assessing conformity and draws up an EU declaration of conformity. This alone doesn’t tell you whether a specific version meets those requirements.

Do I have a cooling-off period when buying online?

When you buy remotely from a business, you’ll often have a 14-day cooling-off period. The Dutch government lists exceptions and distinguishes between buying from a business and buying from a private individual.