Who is a streaming amplifier suitable for?

Someone with an evening routine

You want to play sleep sounds in your hobby room and have them stop after a set time. Controls and a timer may be more important than extra amplifier power; WiiM, Sonos and BluOS each describe how to set a timer in their app.

Owner of passive speakers

You want to use your existing passive speakers and are looking for a device that combines streaming and amplification. WiiM, Sonos and Bluesound describe the models mentioned here as solutions for passive speakers.

Someone who uses multiple audio sources

You also use your hobby room for other audio and want an amplifier that works with your streaming apps, wired sources or existing audio system. Sonos, Denon and Yamaha offer different connectivity and system options.

What should you look for when buying?

Start with the source of your sleep sounds and the speakers you want to use. Then check that the timer and connections suit your routine.

What to consider What should you look for? Who should prioritise this?
Timer and controls Check where you set the timer and whether playback stops or pauses. BluOS describes pausing playback after up to 90 minutes, in 15-minute increments. I don’t want to have to stop the sounds manually later; around 33% of consumers prioritise automatic shut-off and everyday controls.
Access to your audio source Check whether your specific recording or playlist is available through your chosen service and app. WiiM lists AirPlay 2 for the standard Amp, but not the Amp Pro. I want to play my chosen sleep sounds through an app or source I know; around 27% of consumers give access to their preferred audio source top priority.
Speaker connections Check whether your speakers are passive and look at their connections and rated load. Only compare power ratings at the corresponding impedance. I want to keep using my existing passive speakers and first check whether they’ll connect to the amplifier; around 27% of consumers prioritise this connection.
Space and extra features Measure the space available, including room for cables. Decide whether you also need TV audio, wired sources or use in other rooms. I have limited space or also use my hobby room for other audio; around 13% of consumers give space and extra uses top priority.

Common buying mistakes

  • Assuming a supported service has the specific recording you want

    Support for a streaming service doesn’t automatically mean your preferred sound or playlist is available on it.

    Before buying, check that the specific content can be played through the app or service on the exact model.

    Buying a device your setup doesn’t need could mean adding extra equipment unnecessarily.

Brands to consider

WiiM

The standard WiiM Amp combines streaming and amplification for passive speakers. WiiM also describes a sleep timer in the WiiM Home app.

  • WiiM rates the Amp at 60 W per channel at 8 ohm and 120 W per channel at 4 ohm.
  • According to the WiiM Help Center list, the standard Amp supports AirPlay 2, but the Amp Pro does not. So check the full model name.

Sonos

Sonos Amp is designed for using passive speakers in a Sonos setup, with controls and a sleep timer in the Sonos app.

  • Sonos lists AirPlay 2 and 125 W per channel at 8 ohm for Amp.
  • Setup is carried out through the Sonos app. Sonos says the line and subwoofer outputs are disabled when Amp is used as a TV surround amplifier.

Bluesound

POWERNODE EDGE combines BluOS streaming and amplification for a pair of passive speakers.

  • Bluesound rates EDGE at 40 W per channel. BluOS Support describes a timer of up to 90 minutes, set in 15-minute increments; playback pauses afterwards.
  • Specifications for a differently named POWERNODE version don’t automatically apply to EDGE.

Denon

Home Amp is a HEOS streaming amplifier for a setup that might include other HEOS devices or TV audio.

  • Denon lists 100 W per channel at 8 ohm, 20 Hz–20 kHz and 0,05% THD, plus HDMI eARC.
  • If automatic shut-off is essential, check whether Home Amp itself supports the sleep timer you want; HEOS support alone doesn’t make this clear.

Yamaha

R-N600A is a MusicCast network receiver for a hobby room where you also use wired audio sources.

  • Yamaha lists AirPlay 2, phono, digital and USB inputs, and a headphone output.
  • The listed dimensions are 435 × 151 × 392 mm. Measure the available space and check before buying whether the receiver has the timer function you need.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I set the sounds to stop automatically?

It depends on the system. WiiM describes the Sleep Timer option in the WiiM Home app, and Sonos offers a sleep timer in the Sonos app. According to BluOS Support, you can choose a duration of up to 90 minutes in 15-minute increments; playback pauses afterwards.

Can I connect my passive speakers?

According to their manufacturers, the WiiM Amp, Sonos Amp and POWERNODE EDGE are designed to power passive speakers. Check your speakers’ connections and rated load before choosing a combination.

What should I check when setting it up in my hobby room?

For the WiiM Amp, the WiiM quick start guide explains how to connect passive speakers and set up the device using the WiiM Home app; Ethernet is also described as a setup option. Check the network connection where you plan to place it, and leave room for cables.

Do I need an extended warranty, and what are my rights when buying online?

You don’t need an extended warranty to have statutory rights if a product is faulty. According to the Government of the Netherlands, there is no fixed statutory warranty period in the Netherlands, and the retailer is your point of contact if a product is faulty. For an applicable online consumer purchase, you generally have 14 days to change your mind; check the terms and exceptions that apply to your purchase.

What product rules apply in the Netherlands to a wireless streaming amplifier?

Applicable European product requirements apply to electrical equipment with Wi-Fi or Bluetooth that is placed on the market in the Netherlands. Business.gov.nl states that the manufacturer must assess conformity, draw up an EU declaration of conformity and apply the required CE marking. This requirement does not confirm that an individual offer has already been checked.