Who is this for?

Listeners with passive speakers

If you want to use your existing passive speakers at your listening distance, first check their impedance and sensitivity, then compare these with the amplifier's specifications. Crown Audio's calculator shows why speaker sensitivity, distance and the desired volume level all matter.

Listeners with a regular listening position

If you usually listen from the same spot, first consider your speaker setup and the room's effect on the sound. Genelec points out that room acoustics help determine what you hear at your listening position; room correction may then be another factor to weigh up.

Listeners with their own music collection

If you want to play brass band recordings through a particular service or from your own files, check that the exact model supports that source and the controls you want to use. Available sources and features vary by model.

What should you look for in a streaming amplifier?

First check that the amplifier is suitable for your speakers and listening distance. Then consider your listening position and preferred music source. If your current amplifier already does the job, see whether a separate network player would be enough.

What to consider What should you check? Who is this important for?
Speakers and power Check whether your speakers are passive, their nominal impedance and sensitivity, your listening distance, and the amplifier's stated power output at the relevant impedance. I want to know whether the amplifier can drive my speakers suitably at my listening position, rather than relying on a wattage figure alone. Around 33% of consumers in this listening setup want to assess this first.
Room and placement Assess the stereo setup from your usual seat and check how the measurement feature on the exact model works. If I mainly listen in one spot, I first want to know how the setup and room affect what I hear there. Around 27% of consumers in this listening setup put their listening position first.
Recordings and controls Check that you can play your brass band recordings through your preferred service or file source, and that the app or controls suit the way you listen. I want to find and play my own recordings easily using the method I prefer. Around 20% of consumers in this listening setup prioritise access to their recordings.
Choosing a system Check which inputs your current amplifier has and whether any optional features require additional equipment. If my current amplifier already suits my speakers, I want to know whether I can add streaming without replacing the whole unit. Around 20% of consumers in this listening setup want to avoid replacing equipment unnecessarily.

Common buying mistakes

  • Comparing wattage figures alone

    Power figures are not always stated using the same test conditions. Your speakers' characteristics and the distance to your listening position also matter.

    Compare the measurement conditions and the relevant impedance, and start with your own speakers' specifications.

  • Expecting room correction to replace good speaker placement

    Speaker position and your listening spot affect the sound before you even set up room correction. A measurement does not guarantee a result that suits you in every position or with every recording.

    First assess the setup, then check which measurement tools and settings are available on the exact model.

    Bluesound says Dirac Live for the POWERNODE N331 requires a separately available software licence and measurement kit.

  • Connecting a separate network player directly to passive speakers

    According to its manual, a network player such as the Cambridge MXN10 sends an audio signal to an amplifier; it does not provide an amplified speaker signal itself.

    Check whether you already have a suitable amplifier with a compatible input. If not, choose a device that can drive passive speakers.

    You’ll need a suitable amplifier as well as the network player for this setup.

Brands to consider

WiiM

The Amp Pro and Amp Ultra are streaming amplifiers for passive speakers. WiiM lists RoomFit and a touchscreen among the Amp Ultra's features.

  • WiiM specifies 60 W per channel at 8 ohms for the Amp Pro and 100 W per channel at 8 ohms for the Amp Ultra.
  • These stated power figures are not independent listening-test results. Check your speakers' load and compare the features you actually want to use.

Yamaha

The R-N1000A combines network playback with features including a phono input, HDMI ARC and YPAO.

  • Yamaha Netherlands specifies 100 W per channel at 8 ohms, measured from 20 Hz–20 kHz at 0.07% THD. The manual says to use the supplied microphone for YPAO.
  • Assess the measurement results at your own listening position; the feature alone does not prove that it will deliver better results in every room or with every recording.

Bluesound

The POWERNODE N331 pairs passive speakers with BluOS streaming and offers eARC for a TV.

  • Bluesound lists the N331's output as 100 W per channel in stereo mode at 8 ohms.
  • Bluesound says Dirac Live requires a separately available licence and measurement kit. Also make sure you’re looking at the N331, not the older N330.

Denon

The Home Amp is a compact HEOS streaming amplifier for passive speakers, with HDMI eARC.

  • Denon Netherlands specifies 100 W per channel at 8 ohms, 20 Hz–20 kHz and 0.05% THD, and lists support for local audio files.
  • Check that your music service, speakers and preferred inputs are compatible with this exact model.

Cambridge Audio

The Evo 150 SE combines StreamMagic streaming with features including an MM phono input and HDMI ARC.

  • Cambridge Audio lists 150 W per channel, physical controls and a remote control.
  • Compare the extra inputs with how you plan to use the system. The stated power output alone does not demonstrate an audible benefit for brass band recordings.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I tell whether the stated power output is enough?

Don’t rely on a fixed wattage threshold based on room size alone. Compare your speakers' impedance and sensitivity, listening distance and desired volume level with the amplifier's stated power output at that impedance. Also allow some headroom for peaks.

How should I position my speakers before using room correction?

First assess the position of both speakers and your usual listening spot, as the room helps determine what you hear there. For YPAO on a Yamaha R-N1000A, use the measurement microphone supplied according to the manual.

Do I need any extra equipment to use Dirac Live on the POWERNODE N331?

Yes. To use Dirac Live on the N331, Bluesound says you’ll need a separately available software licence and calibration kit with a measurement microphone. Factor these into your decision if you want to use the feature.

What warranty and cooling-off period apply when buying from a Dutch online shop?

In the Netherlands, you’re entitled to a product that is fit for purpose, but there is no fixed statutory warranty period. If there’s a problem, the retailer is your point of contact, according to the Dutch Government. For online purchases from a business, ACM ConsuWijzer says you generally have 14 days from delivery to change your mind, subject to statutory exceptions. The cooling-off period for changing your mind is separate from your rights if a product is faulty.

Which product safety requirements apply to a streaming amplifier in the Netherlands?

Electrical and electronic equipment must meet the applicable European safety requirements. Business.gov.nl says that, where applicable, the manufacturer must affix the CE marking and draw up an EU declaration of conformity, among other requirements. Check the documentation for the device you’re considering.