Who is this buying guide for?

Listeners with a fixed speaker position near a wall

If you can’t move your speakers further away from the rear wall, start by checking the placement guidance for your speaker model. Then decide whether manual tone controls are enough or whether you want to measure and adjust for the effect of the room. KEF Netherlands recommends using the speaker placement guidance and manual as your starting point.

Owners of passive speakers

If you want to keep your existing speakers, compare the amplifier’s stated speaker load and connections with the specifications of your speaker system.

Listeners with set music sources

If, for example, you use a separate CD player, turntable or streaming service, check in advance which input or streaming feature you’ll need. The options vary by amplifier model and version.

What should you look for when buying?

First, check whether you can position your speakers in line with their manual. Then compare the type of correction you want, compatibility with your speakers and the inputs you need for your music sources.

What to consider What should you check? Who is this important for?
Sound balance near a wall Follow the placement advice for your speakers; check whether the amplifier has manual tone controls or measurement-based correction. If you can’t move your speakers further away from the wall, you’ll want to know whether sound adjustment suits your setup. In this buying survey, around 36% of consumers give speaker placement near a wall their highest priority.
Compatible speaker load Compare the stated impedance and amplifier load for the exact combination and number of speaker pairs connected. If you want to keep your current passive speakers, check whether the amplifier’s specifications show that it is compatible with them. Around 29% of consumers give this compatibility their highest priority.
Connections for your sources Make a note of your sources’ outputs and check that the amplifier has the analogue, optical, coaxial or phono input you need. If you mainly want to keep using a particular source, such as a turntable or CD player, make sure it can connect directly or allow for additional equipment. Around 21% of consumers put connectivity for their main music source first.
Features and configuration Check whether streaming, room correction, licences and any modules you need are included with the exact version. If you want a simple setup without unexpected extra equipment, check exactly which features are included. Around 14% of consumers give ease of use and the required add-ons their highest priority.

Common buying mistakes

  • Expecting an amplifier to fix awkward speaker placement

    Distance from the wall and speaker placement still matter, even if your amplifier has tone controls or room correction.

    First follow the placement advice for your speakers, then decide whether you want to use manual adjustments or measurement-based correction.

  • Assuming every NAD C 3050 comes with Dirac Live

    According to NAD, BluOS streaming and Dirac Live on the C 3050 depend on the MDC2 BluOS-D module.

    Before you buy, check whether the module is included with the version on offer or needs to be purchased separately, and which Dirac licence is included.

  • Comparing only wattage figures or brand claims

    Power ratings depend on the measurement conditions and speaker load. A manufacturer’s claims about sound don’t necessarily predict how the amplifier will perform in your room.

    Compare power figures only on the same basis, and check compatibility against the specifications of your speakers and sources.

Brands to consider

Marantz

The PM6007 is an integrated stereo amplifier for anyone looking for wired analogue or digital sources and manual tone controls.

  • The Dutch product specifications list an MM phono input, as well as optical and coaxial digital inputs.
  • The PM6007 doesn’t have built-in network streaming. According to the manual, Source Direct must be switched off to adjust bass and treble; this doesn’t measure the room.

Yamaha

The A-S501 is an option for anyone using separate music sources who wants to adjust the sound balance manually.

  • Yamaha lists optical and coaxial digital inputs, as well as a variable loudness control.
  • These features don’t mean that the amplifier measures the room’s acoustics.

Lyngdorf

The TDAI-1120 combines stereo amplification, network playback and built-in RoomPerfect for anyone looking for room correction.

  • Lyngdorf lists RoomPerfect and an output of 2 × 60 W RMS at 8 ohms.
  • The manufacturer’s claims about acoustic results aren’t an independent listening test or a guarantee of performance in every setup near a wall.

NAD

The C 3050 is an integrated amplifier that can be upgraded with a specific module for streaming and room correction.

  • According to NAD, the MDC2 BluOS-D module is required for BluOS and Dirac Live.
  • NAD states that the included Dirac Live Limited Bandwidth licence covers frequencies up to 500 Hz. Check whether the module is included with the version on offer.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do you need to replace your amplifier if your speakers are close to the wall?

Not before you’ve looked at the setup. KEF recommends trying different distances from the rear wall and using your own speakers’ manual as a starting point; placement advice isn’t necessarily the same for every model.

When should you use tone controls or room correction?

Manual tone controls let you adjust the sound balance yourself, while room correction uses measurements. On the Marantz PM6007, Source Direct must be switched off to adjust the bass and treble. For measurement-based features, check whether the module and accessories you need are included with your version.

What can you do if your amplifier doesn’t meet your needs or develops a fault after purchase?

For many purchases made online from a business, you have a 14-day cooling-off period, according to the Dutch Government; check the terms of your particular purchase. The Dutch Government also says you’re entitled to a product that works properly, and the seller must provide a solution if there’s a problem. A manufacturer’s warranty is in addition to your statutory rights.

What should you check about amplifier safety in the Netherlands?

The Netherlands Enterprise Agency (RVO) lists electrical products as a category for which CE marking may be mandatory. Check which rules apply to the specific amplifier, and review the markings and documentation for the version intended for sale; a brand name alone doesn’t prove compliance.