Who is this choice relevant to?

Listeners with existing passive speakers

If you want to keep your speakers, it’s worth comparing their impedance and connection details with those of the amplifier. Yamaha and WiiM’s specifications show why wattage alone isn’t enough to judge whether they’re a good match.

Listeners in a compact living room

In a small room, it’s important to consider both speaker placement and where you’ll sit when choosing an amplifier. Genelec draws on studio practice to explain how room acoustics and positioning affect what you hear.

Listeners with several music sources

If you switch between sources such as a turntable, TV and streaming device, compare their outputs with the amplifier’s inputs and features. Denon, Cambridge Audio, Yamaha and WiiM offer different combinations of analogue, digital and streaming options.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Speaker compatibility Compare your speakers’ impedance and connection details with the manual for the exact amplifier model. Only compare power ratings when the impedance and measurement basis are the same. I want to keep my passive speakers and check in advance that they’ll work with the amplifier. Around 36% of consumers make speaker compatibility their top priority.
Small living room First, decide where your speakers and listening position can go. Then consider whether tone controls or room correction would be useful for your setup. In a compact room, I want to consider where my speakers and listening chair will go, not just extra features. Around 29% of consumers put use in a small room first.
Inputs for your sources Make a note of the outputs on your TV, turntable and other sources. For a turntable, also check the cartridge type; for streaming, check which service you want to use. I want to connect my own sources directly, or know in advance what additional equipment I’ll need. Around 21% of consumers make source connections their top priority.
Overall setup Check which speakers and sources you’ll keep, and what additional equipment you might need. Read the sales and warranty terms too. I want to know what I’ll need for the complete setup and what after-sales support I can expect. Around 14% of consumers put the total purchase and after-sales support first.

Common buying mistakes

  • Comparing wattage without checking impedance or measurement basis

    A power rating at 8 ohms isn’t directly comparable with one at 4 ohms or one measured under different conditions. For example, Yamaha lists a minimum RMS output at 8 ohms across 20 Hz–20 kHz for the A-S301, alongside a 4-ohm figure based on a different measurement method.

    Compare specifications using the same impedance and measurement basis, then check that the combination suits your speakers.

  • Buying an amplifier to fix a placement problem

    Speaker and listening positions, as well as reflections in the room, affect what you hear. A different amplifier won’t automatically fix an awkward setup.

    First, see which speaker and listening positions are practical. Treat tone controls or room correction as extra adjustment options, not a substitute for good placement.

  • Assuming every amplifier accepts the same sources

    The models reviewed differ in their analogue and digital inputs, phono connections and built-in streaming. The Cambridge Audio AXA35, for example, is designed for analogue sources and has an MM phono input; the WiiM Amp Pro offers streaming and HDMI ARC, among other features.

    Before buying, make a list of the outputs on your TV, turntable and other sources, then compare them with the inputs on the exact model you’re considering.

    A digital source may need additional equipment if your amplifier doesn’t have a suitable digital input.

Brands worth comparing

The features below apply to the models listed and can help you compare their connections and specifications with your own equipment.

Yamaha

The A-S301 is an integrated amplifier worth comparing if you’re looking for digital inputs and variable loudness control; Yamaha lists optical and coaxial inputs.

  • Yamaha Netherlands specifies a minimum RMS output of 60 W + 60 W at 8 ohms across 20 Hz–20 kHz for the A-S301.
  • The stated 4-ohm figure uses a different measurement basis, so it isn’t directly comparable with that RMS rating. The specifications don’t prove a sound-quality advantage for wind-band music.

Denon

According to Denon Netherlands, the PMA-600NE combines digital inputs and Bluetooth with a phono input for a compatible MM cartridge.

  • Denon lists an output of 45 W per channel at 8 ohms.
  • Bluetooth and phono are most relevant if you use those sources; the specifications aren’t an independent listening test.

Marantz

The PM6007 is an integrated amplifier worth comparing if you use digital and analogue sources.

  • Marantz specifies 2 × 45 W at 8 ohms RMS across 20 Hz–20 kHz and lists a built-in DAC.
  • A sound profile described by the manufacturer isn’t a proven advantage in your living room.

Cambridge Audio

The AXA35 is an option to compare for a setup using mainly analogue sources and a turntable with a compatible MM cartridge.

  • Cambridge Audio lists 35 W per channel, four RCA inputs, MM phono and tone controls.
  • A digital source without a suitable analogue output may need additional equipment.

WiiM

The Amp Pro is a compact streaming amplifier for passive speakers; WiiM lists streaming, HDMI ARC and room correction.

  • WiiM specifies 60 W per channel at 8 ohms. The manufacturer describes room correction as an adjustment option.
  • Setup requires a smartphone or tablet and a Wi-Fi connection. Room correction doesn’t guarantee that placement or acoustic problems will disappear.

Products on Joybuy

Related products coming soon.

Frequently asked questions

How do I connect passive speakers to an amplifier?

First, check your speakers’ specifications and the manual for the exact amplifier model. Connect the left and right speakers to the corresponding speaker outputs; WiiM describes using speaker cables to connect the Amp Pro.

Will room correction solve awkward acoustics in a small living room?

Not on its own: room correction is an extra adjustment option, but placement and reflections still affect what you hear. WiiM offers room correction on the Amp Pro; Genelec’s placement guidance is based on studio practice, not measurements taken in your living room.

Do I need a separate phono preamp for a turntable?

That depends on your turntable and amplifier. The manufacturers list an input for a compatible MM cartridge on the Denon PMA-600NE and Cambridge Audio AXA35; check your turntable’s cartridge and connection method.

What are my rights if an amplifier bought online is faulty or doesn’t meet expectations?

For distance purchases, you generally have a 14-day cooling-off period; the Dutch government explains that the conditions can vary depending on the circumstances. In the Netherlands, there’s no fixed statutory warranty period: if a product is faulty, the seller must provide an appropriate solution. An additional warranty doesn’t replace your statutory rights.

What can I do with my old amplifier when I buy a new one?

When you buy a new, similar appliance for personal use, the seller must take back your old one, according to the Dutch government. Ask the seller how this works for an online purchase.