Start by checking where you can position your speakers and their specifications: an amplifier alone cannot guarantee a solution to the effect of the wall. A traditional integrated amplifier may be suitable if you can adjust the positioning and mainly need the right connections. If your setup is fixed, consider EQ or room correction if you’re willing to set it up. Genelec notes that calibration cannot solve every room problem, so also check your speakers’ load, recommended positioning and music sources.
Who is this buying guide for?
Listener with a fixed position near a wall
Your speakers can’t be moved much further away from the wall, and you want to know whether positioning, EQ or room correction could help. Genelec points out that calibration cannot solve every acoustic problem; KEF rejects a blanket ban on positioning rear-ported speakers close to a wall.
Owner of passive speakers
You’re looking for an amplifier that suits your existing speakers and connections. Compare power ratings carefully, taking note of the stated impedance and measurement conditions; the wattage figure alone doesn’t determine whether an amplifier is suitable.
Listener with several music sources
You want to know in advance whether the exact model has the inputs and playback options you need, such as optical or coaxial digital, or built-in streaming.
What should you look for when choosing?
Start with speaker positioning and how the amplifier will connect to your existing system. Then decide whether you prefer manual controls or correction features. Genelec says calibration cannot solve every room problem, while KEF rejects an absolute ban on placing rear-ported speakers near a wall.
| What to consider |
What should you check? |
Who is this important to? |
| Performance when positioned near a wall |
Read your speakers’ positioning instructions and try the available distances. Only then compare manual EQ with room correction. |
If my speakers have to stay in a fixed position close to the wall, I want to know what I can adjust about their placement first; around 36% of consumers put this consideration first. |
| Compatibility with your speakers |
Note the model and specifications of your passive speakers, then compare them with the amplifier’s documentation. Check the impedance and measurement conditions when looking at power ratings. |
If you want to keep your existing passive speakers, you need an amplifier that suits them; around 29% of consumers prioritise this match. |
| Connections and streaming |
List your music sources and check that each model has the inputs and playback options you need. |
If I want to keep using my current sources, I check the connections or streaming options I need first; around 21% of consumers put this choice first. |
| Setup and controls |
Decide whether you’d rather use the controls on the unit or set up an app and measurement function. Check the controls on the exact model. |
If you want to listen without complicated setup, you may prefer controls on the unit; around 14% of consumers prioritise ease of use. |
Common buying mistakes
-
Assuming more power will automatically overcome the effect of the wall
The room and speaker positioning affect frequency response. Genelec also notes that calibration cannot completely resolve every acoustic problem.
First, check your speakers’ positioning instructions and try the available positions. Then compare the adjustment options offered by different amplifiers.
-
Assuming Dirac Live is included with every NAD C 3050
NAD links BluOS and the stated Dirac Live feature to the optional MDC2 BluOS-D module.
Before buying, confirm which version is being offered and whether the module is included.
If the module isn’t included, you’ll need to buy it separately to use the stated features.
-
Assuming built-in streaming supports every playback option you want
WiiM’s specification table does not list AirPlay 2 for the Amp Pro.
Check that the exact model works with the music service and control method you use.
If your preferred option isn’t supported, you may need a different source or model.
Brands to consider
Yamaha
The A-S301 is an integrated amplifier for wired sources, with manual controls.
- Yamaha Netherlands lists optical and coaxial digital inputs and a minimum of 2 × 60 W RMS at 8 ohms, 20 Hz–20 kHz.
- The A-S301 has a manual loudness control, but Pure Direct bypasses it. The stated features do not include automatic room measurement.
WiiM
The Amp Pro combines amplification for passive speakers with network streaming and adjustment options.
- WiiM lists 60 W per channel at 8 ohms, along with EQ and RoomFit features, for the Amp Pro.
- WiiM’s specification table does not list AirPlay 2 for the Amp Pro. RoomFit settings vary between WiiM models.
Lyngdorf
The TDAI-1120 is a streaming amplifier with built-in RoomPerfect correction.
- Lyngdorf Audio lists RoomPerfect, streaming and 2 × 60 W RMS at 8 ohms.
- Check separately that the amplifier suits your speakers and room; statements by Lyngdorf about its sound are manufacturer claims.
NAD
The C 3050 can be upgraded with the MDC2 BluOS-D module for streaming and Dirac Live.
- NAD says the Dirac Live licence supplied with the module includes correction up to 500 Hz.
- The module is required for the stated features. Check whether it’s included with the version on offer.
Marantz
The PM6007 is an integrated amplifier for wired analogue and digital sources.
- Marantz Netherlands lists 2 × 45 W RMS at 8 ohms, 20 Hz–20 kHz, five analogue inputs, two optical inputs and one coaxial input.
- According to the Dutch product specifications, this model has no built-in Wi-Fi or Bluetooth. Descriptions of its sound are manufacturer claims.
Joybuy products
Related products coming soon.
Frequently asked questions
Do speakers with a bass reflex port always need to be positioned well away from the wall?
No, that isn’t a general rule. KEF says that distance can affect bass response, but rejects an absolute ban on positioning rear-ported speakers near a wall. Follow the instructions for your own model and try the available positions.
How do you set up room correction for your listening position?
First, position the speakers as well as you can within the space available, then use the measurement and adjustment feature on your chosen model. WiiM says that RoomFit settings vary by model. Compare the sound at your usual listening position, and don’t expect correction to solve every room problem.
Do you need an extra module or streamer?
It depends on the model and the source you use. The optional MDC2 BluOS-D module is required for BluOS and the stated Dirac Live feature on an NAD C 3050; the WiiM Amp Pro has built-in streaming. Check the exact version and which source accessories you need.
What returns period and warranty apply when buying from a Dutch retailer?
For many online purchases made by consumers from a business, there is a 14-day cooling-off period, with some exceptions. The Dutch government also states that there is no fixed statutory warranty period in the Netherlands: if a product is faulty, the retailer must provide a solution.