Who is this choice relevant to?

Listener with speakers close to the wall

If you can barely move your passive speakers, you’ll want to know how the bass balance and stereo imaging sound from your listening position. Genelec explains that positioning and reflections can affect sound reproduction, although the effect depends on the setup.

Owner of passive stereo speakers

You want to keep your existing speakers and choose an amplifier whose speaker load, connections and controls suit your system. Yamaha and Denon publish connection and specification details for their individual models.

Listener who mainly streams

If you listen to folk through a music service, check whether the service and controls you want are built into the amplifier or require a separate source. WiiM describes streaming services and app control for the Amp Pro.

What should you look for when buying?

Integrated amplifier with tone controls

A good fit if: you use existing passive speakers and separate sources, and manual adjustments from your listening position are enough.

Bear in mind: tone controls are not the same as measurement-based room correction. Yamaha states that Pure Direct on the A-S301 bypasses the tone and loudness controls.

Network amplifier with room settings

A good fit if: you want to stream directly through supported services and adjust the sound from your listening position. WiiM lists streaming and RoomFit for the Amp Pro.

Bear in mind: check that the service, connections and speaker compatibility you need are supported. Setup involves app control, and room correction won’t solve every positioning issue.

Amplifier with more advanced measurement-based correction

A good fit if: you have little flexibility to change the speaker positions and are specifically looking for a system with measurement and bass management features. Anthem lists ARC and bass management for the STR Integrated.

Bear in mind: this requires a suitable measurement and installation process. Check the version and its suitability for your system before choosing a model.

Consideration What to look for Who it matters to
Sound with speakers near a wall Assess the bass and stereo imaging from your intended listening position. Follow your speakers’ positioning guidance, and don’t treat correction as a substitute for suitable placement. If I can barely move my speakers, I want to hear how the wall affects the bass and stereo imaging before paying for correction. For around 36% of consumers, sound with speakers near a wall is the top priority.
Speaker compatibility Compare the impedance and connection guidance for your exact speaker model with the amplifier’s manual. Only compare power ratings when the load and test conditions are the same. Anyone who wants to keep their current passive speakers should first check whether the amplifier suits that specific pair. For around 29% of consumers, speaker compatibility is their main buying concern.
Connecting your music source Make a note of your sources’ outputs and check which inputs you need. Bluetooth isn’t the same as built-in network streaming. For vinyl, also check that the phono input suits your setup. If I mainly listen through a particular service, streamer or turntable, I want to know how to connect and control that source. Around 21% of consumers choose source connections as their first consideration.
Controls and settings Decide how much configuration you’re happy with, and check whether a direct listening mode switches off tone controls or correction. WiiM says you’ll need a smartphone or tablet to set up the Amp Pro. If you want your system to be easy to use every day, consider whether manual controls or app-based settings suit you better. Ease of use matters most to around 14% of consumers.

Common buying mistakes

  • Assuming speakers close to a wall will always produce too much bass

    Depending on the speakers, distance and listening position, a wall can change the bass response or even cause cancellation. Bass controls or room correction won’t solve every positioning issue.

    Assess the bass and stereo imaging from your own listening position, and check your speakers’ manual before making correction the deciding factor in your purchase.

  • Comparing power ratings without checking the test conditions

    A rating at 8 Ω across 20 Hz–20 kHz isn’t directly comparable with one at 4 Ω or one measured at 1 kHz only.

    Compare the load, frequency range and distortion figure as well as the power, and check the guidance for your own speakers.

  • Treating Bluetooth, network streaming and room correction as the same feature

    The EU specifications for the Denon PMA-600NE list Bluetooth; WiiM describes specific network services and RoomFit for the Amp Pro. These are different features.

    Make a note of the services, controls and inputs you need, and check that they’re available on the exact model.

    If your preferred way of listening isn’t built in, you may need a separate compatible music source.

Brands to consider

WiiM

The Amp Pro is a network amplifier for passive speakers, designed for anyone looking for streaming and room settings in one device.

  • WiiM lists RoomFit, app control and supported streaming services for the Amp Pro.
  • The setup instructions require a smartphone or tablet; room correction doesn’t guarantee a solution for every room layout.

Yamaha

The A-S301 is a conventional integrated amplifier with analogue controls and digital inputs.

  • Yamaha specifies tone and loudness controls, and 60 W + 60 W at 8 Ω under the stated test conditions.
  • Pure Direct bypasses the controls listed. The specifications don’t indicate any particular suitability for folk as a music genre.

Denon

The EU version of the PMA-600NE is an option for combining an MM turntable, Bluetooth and digital sources.

  • The EU manual lists these inputs, bass and treble controls, and speaker outputs for 4–16 Ω.
  • Bluetooth doesn’t mean that your preferred network service is built into the amplifier.

Marantz

The manufacturer describes the MODEL 50 as an integrated stereo amplifier for source components.

  • Marantz lists a power output of 70 W for this model.
  • That product description alone doesn’t indicate a solution for the acoustics of speakers close to a wall. Check that it has the inputs you need and whether you’ll require a separate streamer.

Arcam

According to Arcam, the A5+ combines analogue and digital inputs, MM phono and Bluetooth for different music sources.

  • Arcam specifies 50 W per channel at 8 Ω, 20 Hz–20 kHz and 0.5% THD.
  • Check that the connections on the version you choose work with your own sources.

Amplifiers at Joybuy

Related products coming soon.

Frequently asked questions

Should speakers close to a wall always be moved further forward?

No, it depends on the speakers and the setup. For its monitor setups, Genelec describes both changes to the bass and possible cancellation caused by the wall behind the speaker. Try positions that are practical for you and follow the guidance for your own speakers; don’t treat distance advice for a particular model as a universal rule.

Can I connect active speakers to the regular speaker outputs on an integrated amplifier?

Don’t use amplified speaker outputs as a general connection for active speakers. WiiM specifies a pair of passive speakers for the Amp Pro. For active speakers, check their manuals to find out which signal input and source output to use.

What are my rights if an amplifier I bought online isn’t suitable or develops a fault early on?

According to ACM ConsuWijzer, online purchases generally come with a 14-day cancellation period from delivery, subject to legal exceptions. You also have statutory rights if a product, when used normally, doesn’t do what you could reasonably expect. This doesn’t automatically mean that every product has a fixed two-year warranty.

Which Dutch safety rule is relevant when buying a new stereo amplifier?

According to the Netherlands Enterprise Agency, CE marking is compulsory for product groups covered by the relevant EU rules; the applicable directives depend on the specific device. Check the version and product information. CE is a conformity marking, not an independent safety certification.