Who is this choice relevant to?

Owner of passive speakers

You already have speakers and want to choose an amplifier to match. Don’t just look at the wattage: check the impedance and the amplifier’s permitted range too, as explained by Denon and Jointheaudio’s speaker matching guide.

Living room streamer

You mainly play electronic music from a phone or streaming service and want to decide whether Bluetooth is enough or built-in network streaming would better suit the way you listen. Denon, WiiM and Yamaha describe different connection and streaming options.

Bass and TV listener

You want to be able to adjust the bass in a small space, possibly with an active subwoofer, and perhaps use the same setup with your TV too. WiiM and Marantz document, among other things, subwoofer and TV connections.

What should you look for when buying?

If you’re looking for a stereo amplifier for electronic music in a small living room, it helps to focus on one main buying consideration for each choice.

Consideration What should you check? Who should prioritise this?
Speaker compatibility Check the impedance of your passive speakers and the amplifier’s permitted range. Only compare stated power ratings when the impedance and measurement conditions are the same. If I want to keep using my passive speakers, I’ll first check that their impedance falls within the amplifier’s range. Around 33% of consumers put this speaker match first.
Your preferred streaming method Check whether you need Bluetooth, a particular streaming service or network protocol, or a wired source. I want to play music using the method I use every day, without unnecessary extra equipment. Around 27% of consumers prioritise their preferred way to stream.
Adjusting the bass Check whether the output is suitable for an active subwoofer and what level, phase and crossover settings the exact model offers. If I want to connect an active subwoofer, I’ll check the output and the adjustment options for blending it with my main speakers. Around 20% of consumers prioritise bass control.
Placement and TV Compare the external dimensions with the space available. If you’ll use it with a TV, check for an ARC or eARC connection and the audio settings required. I have limited space and may also want to use my speakers with a TV. Around 20% of consumers prioritise placement or a TV connection.

Common pitfalls when choosing

  • Comparing wattage figures without checking the measurement conditions

    The stated power ratings for the Denon PMA-600NE and Yamaha R-S202D were measured using different frequency and distortion conditions. So a higher wattage figure doesn’t automatically make for a better comparison.

    Only compare figures when impedance, frequency range and distortion are stated on the same basis. Also check that the amplifier is suitable for your speakers’ impedance.

  • Confusing Bluetooth with built-in network streaming

    Bluetooth from a phone and direct streaming over a network are different features. The Denon and Yamaha models described include Bluetooth; WiiM also documents network streaming.

    Before buying, work out which device and service you usually listen to, then check that the exact model supports that playback method.

  • Assuming a subwoofer output is a complete bass solution

    A subwoofer output is for connecting an active subwoofer; the output itself doesn’t provide one. WiiM also describes separate settings for subwoofer level, phase and crossover frequency on the WiiM Amp.

    Check that your subwoofer is active and what adjustment options the amplifier offers. Remember to set up the crossover with your main speakers.

Brands as a comparison guide

Denon

According to Denon Netherlands’ product information, the PMA-600NE is an integrated amplifier with Bluetooth, digital inputs and an MM phono input.

  • Denon specifies a speaker range of 4–16 Ω and a subwoofer pre-out. Its stated power is 45 W + 45 W at 8 Ω, 20 Hz–20 kHz and 0.07% THD. These are Denon’s specifications, not the results of an independent performance test.
  • Bluetooth is not the same as built-in network streaming. Check that the connections suit your sources.

WiiM

WiiM describes the Amp as a compact amplifier for passive speakers, with network streaming, HDMI ARC and a subwoofer output.

  • WiiM documents settings for subwoofer level, phase and crossover frequency. For TV use via ARC, the manufacturer specifies stereo PCM as the digital audio output setting.
  • The app and network features are part of how you control the device. Check that the services and connections you want suit the way you’ll use it.

Marantz

Marantz describes the MODEL M1 as a compact streaming amplifier for use with a TV via HDMI eARC.

  • Marantz lists HEOS, a subwoofer output and 100 W per channel for the MODEL M1.
  • The sound benefits claimed on the product page come from Marantz and are not based on an independent comparison. Check that the features and design suit your setup.

Yamaha

According to Yamaha Netherlands, the R-S202D is a stereo receiver for anyone who wants to use Bluetooth and DAB/DAB+ or FM radio alongside wired sources.

  • Yamaha lists connections for two speaker systems.
  • The stated power of 100 W per channel applies at 8 Ω, 40 Hz–20 kHz and 0.2% THD. Don’t compare it directly with figures measured under different conditions.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

Is more watts per channel automatically better for electronic music?

No. First check that your speakers’ impedance falls within the permitted range, then look at the impedance, frequencies and distortion used to measure each wattage figure. Denon specifies 45 W + 45 W at 8 Ω across 20 Hz–20 kHz for the PMA-600NE; Yamaha lists 100 W per channel at 8 Ω across 40 Hz–20 kHz for the R-S202D, with a different distortion value.

How do I connect a subwoofer to a WiiM Amp?

WiiM recommends using the subwoofer output with an active subwoofer. WiiM describes settings for level, crossover frequency and phase; adjust these to suit your main speakers and listening position.

What should I check if I’m connecting my TV via HDMI?

Check that the amplifier and TV have the intended ARC or eARC connection. For the WiiM Amp, the manufacturer says to set the TV’s digital audio output to stereo PCM when using HDMI ARC. Don’t apply this instruction to other models without checking first.

What CE requirements must a mains-powered amplifier meet?

A mains-powered amplifier must meet the applicable EU requirements and carry the required CE marking. European rules for electrical equipment designed for 50–1.000 V AC apply within that voltage range; a product listing alone doesn’t confirm that a specific model meets the requirements.

Who can help if my amplifier bought online develops a fault?

For a consumer purchase in the Netherlands, the seller must resolve problems with a faulty product. There is no fixed statutory warranty period in the Netherlands; what you can expect from a product depends, among other things, on the product and the circumstances. A manufacturer’s warranty doesn’t replace this right, according to the Dutch government.