Start with speaker placement and specifications: a wall can boost bass or reduce it at certain frequencies, and more amplifier power won’t reliably solve this. Then choose based on your sources and how you want to control your system. An amplifier with manual tone controls, a model with a phono input and a streaming amplifier with app-based EQ each meet different needs, but none of these features alone guarantees good sound in your room.
Who is this choice relevant to?
Listener with speakers close to the wall
You want to play rock albums without the bass overwhelming your listening position, but you can’t move your speakers very far. Genelec explains that reflections from the wall behind a speaker mainly affect low frequencies, while KEF notes that interaction with the wall can either boost or reduce certain frequencies.
Owner of an existing hi-fi system
You want to keep using your passive speakers and turntable, CD player or other source. Check which inputs you need and whether the amplifier is compatible with your speakers’ impedance. For example, Cambridge Audio provides model-specific guidance on using 8 Ω speakers with the AXA35.
Rock listener who streams
You want to listen to albums through a supported streaming service and would rather adjust settings in an app than use only the controls on the device. WiiM describes streaming, EQ and RoomFit settings for the Amp Pro; the RoomFit features available vary by model.
What should you look for?
| What to consider |
What should you look for? |
Who is this important for? |
| Bass and placement |
Check the placement guidance for your speakers. Then compare manual bass control with EQ or room correction; neither guarantees that every peak or dip in the room will be corrected. |
If the bass sounds too strong or too weak at your listening position and you can only make limited changes to your setup, start by finding out what placement can change. Around 36% of consumers put bass and placement first. |
| Passive speakers |
Check your speakers’ impedance and the requirements for the exact amplifier model. Compare power ratings only alongside their impedance and measurement basis. |
If you want to keep your existing passive speakers, the amplifier must be suitable for their load according to the manufacturer’s information. For around 29% of consumers, speaker compatibility is their top buying priority. |
| Connection for your source |
Match the input to the output of your turntable, connected player or preferred streaming service. An MM phono input is not the same as a line input. |
If you first want to check whether your turntable, player or streaming service will work with the amplifier, check the specific connections. Source connections are a top priority for around 21% of consumers. |
| Controls and volume |
Choose between controls on the device and settings in an app. Also check whether a direct playback mode disables the tone controls. |
If you listen at different volumes and want to make adjustments without using an app, look at the available tone and volume controls. Around 14% of consumers give easy volume control their top priority. |
Common buying mistakes
-
Buying more watts to fix boomy bass near the wall
Reflections from a wall can boost or reduce low frequencies at your listening position. More power won’t change speaker placement or the way the room affects the sound.
First, check the placement guidance for your speakers and listen from your usual seat. Only then compare the adjustment options offered by different amplifiers.
-
Assuming every RCA input is suitable for a turntable
A phono output and a line input operate at different signal levels. According to WiiM, the WiiM Amp Pro doesn’t have a built-in phono input.
Check your cartridge, your turntable’s output and whether it has a built-in phono preamp. If not, see whether you need a suitable separate preamp.
-
Using a direct playback mode when you want to adjust the bass
According to Yamaha, Pure Direct on the A-S501 bypasses the tone controls; Denon says the same of Source Direct on the PMA-600NE.
Turn off this kind of mode when you want to adjust the bass, and check the manual for the exact model.
Brands to compare
Denon
According to Denon, the PMA-600NE combines connections for digital sources with an MM phono input and Bluetooth.
- Denon specifies 45 W per channel at 8 Ω for the PMA-600NE.
- Bluetooth isn’t the same as built-in network streaming. Check that the connections suit your sources and speakers.
WiiM
According to WiiM, the Amp Pro is a streaming amplifier with EQ and RoomFit settings.
- WiiM lists streaming, EQ and RoomFit for the Amp Pro.
- The RoomFit settings available vary by model, and the result depends on the settings and the room. According to WiiM, the Amp Pro has no phono input; for vinyl, you may need a suitable built-in or separate phono preamp.
Yamaha
According to Yamaha, the A-S501 has digital and phono connections, tone controls and variable loudness.
- Yamaha specifies 85 W + 85 W RMS at 8 Ω and 20 Hz–20 kHz for the A-S501.
- According to Yamaha, Pure Direct bypasses the tone and loudness controls. The power rating alone won’t predict how the bass will sound with your speakers near the wall.
Cambridge Audio
According to Cambridge Audio, the AXA35 is designed for use with a compatible MM turntable and passive speakers.
- Cambridge Audio specifies 35 W at 8 Ω and an MM phono input for the AXA35.
- Cambridge Audio advises against using 4 Ω and 6 Ω speakers with this model because of the risk of overheating; this limitation applies to the AXA35.
Joybuy products
Related products coming soon.
Frequently asked questions
Should I rule out speakers with rear bass ports if they’re close to the wall?
No, not automatically. KEF explains that a wall can boost or reduce the bass and doesn’t recommend a blanket ban on speakers with rear ports. Follow the placement guidance for your speaker model and listen from your usual seat.
Can I connect a turntable directly to a WiiM Amp Pro?
Only if the turntable has a suitable built-in phono preamp. Otherwise, according to WiiM, you’ll need a separate phono preamp between the turntable and the line input.
What if the system doesn’t suit me at home or the device breaks down too soon?
For a standard online consumer purchase, the ACM says you generally have 14 days from delivery to change your mind, with some exceptions. If a product is faulty, contact the seller; according to the ACM, the statutory guarantee in the Netherlands depends on what you could reasonably expect from the product.
What product requirements apply to a stereo amplifier in the Netherlands?
Equipment covered by EU rules for electrical equipment must meet the applicable safety and conformity requirements and carry the CE marking. If an amplifier has Bluetooth or Wi-Fi, the applicable requirements for radio equipment also apply. Check the exact version being offered: a manufacturer’s declaration for a model doesn’t automatically identify a specific product variant.