Who is this buying guide for?

Owner of passive speakers

You want to keep using your existing stereo speakers, so start by checking the connections and specifications of your speakers, rather than looking at wattage alone. Yamaha and WiiM’s specifications show which details you can compare for each amplifier model.

Vinyl or CD listener

You play rock albums on a turntable or CD player and want to know which input you need. With a turntable, it’s also important to know where the phono preamp is; the Consumers’ Association explains this necessary step, while Denon and Cambridge Audio list MM phono on specific models.

Streaming listener with limited space

You mainly listen through a music service and want a set-up that suits your living room without losing important connections. WiiM describes network playback and physical inputs for the WiiM Amp; check that your service and other sources are compatible with the model you choose.

What should you look for when buying?

Integrated stereo amplifier

Choose this option: if you mainly use a turntable, CD player or another wired source and need the relevant inputs.

Bear in mind: Bluetooth is not the same as built-in network streaming; available inputs vary by model.

Streaming amplifier

Choose this option: if you mainly listen through a supported music service and want to power passive speakers from a single amplifier.

Bear in mind: a line input is not a substitute for a phono input; a turntable without its own phono preamp may need a separate device.

What to consider What to look for when buying Who is this important for?
Speakers and amplifier Check the specifications of your speaker model and compare them with the manual for the exact amplifier. Only compare power ratings when the impedance and measurement conditions are the same. I want to keep using my passive speakers and not rely on a high wattage figure alone. Around 36% of consumers prioritise speaker compatibility.
Connection for vinyl or CD Check the output of your CD player and whether your turntable has its own phono preamp. Make sure an MM phono input is suitable for the cartridge you’re using. I want to connect my existing record or CD player without overlooking a necessary input or phono preamp. Around 29% of consumers prioritise connections for physical album sources.
Network streaming Check whether your music service and playback method are supported by each model. Bluetooth, a digital input and network streaming are different connection or playback options. I mainly listen through a music service and want to make sure the amplifier supports my preferred playback method. Around 21% of consumers prioritise network streaming.
Positioning and controls Measure the available space and allow room for connection cables; follow the model’s positioning instructions. Decide whether you want physical tone or loudness controls. I want the amplifier to fit in my living room and be easy to use, including when I want to adjust the settings myself. Around 14% of consumers prioritise positioning and controls.

Common mistakes

  • Treating a line input as a phono input

    A turntable needs a phono preamp if one isn’t already built into the turntable or the amplifier you’ve chosen.

    Check your turntable’s output and cartridge, and find out where phono pre-amplification takes place in the complete signal chain.

    If the required pre-amplification is missing, you may need a suitable separate phono preamp.

  • Comparing wattage figures measured under different conditions

    A stated power rating alone doesn’t tell you whether an amplifier will suit your speakers. Yamaha lists figures for the A-S301 at different impedances and under different measurement conditions.

    Compare impedance, frequency range and measurement conditions, then check the guidance for your exact speaker model.

  • Assuming Bluetooth means built-in network streaming

    Denon lists Bluetooth for the PMA-600NE, while WiiM specifies separate network playback methods for the WiiM Amp. These features aren’t the same.

    Check whether the exact model supports your music service and preferred playback method.

    If your preferred network option isn’t available, you may need a separate network player.

Brands to compare

Yamaha

According to Yamaha, the A-S301 is an integrated amplifier for wired analogue and optical or coaxial digital sources.

  • Yamaha specifies 60 W per channel at 8 ohms over 20 Hz–20 kHz for the A-S301, along with a variable loudness control and dimensions of 435 × 151 × 387 mm.
  • Check that the dimensions and inputs suit your set-up; these specifications apply to the A-S301 and not automatically to other Yamaha models.

Denon

According to Denon, the PMA-600NE combines MM phono, digital inputs and Bluetooth for sources such as a turntable, CD player or phone.

  • Denon specifies 45 W per channel at 8 ohms for the PMA-600NE.
  • Bluetooth doesn’t mean built-in network streaming; check that the available playback method works with your music service.

Marantz

According to Marantz, the PM6007 is an integrated two-channel amplifier for a range of wired sources.

  • Marantz lists 2 × 45 W RMS at 8 ohms over 20 Hz–20 kHz for the PM6007, along with analogue and digital inputs and phono EQ.
  • The model’s specifications don’t list built-in Wi-Fi, Bluetooth or HEOS playback; don’t confuse this model with other Marantz series.

Cambridge Audio

According to Cambridge Audio, the AXA35 is an integrated amplifier with analogue inputs, MM phono and tone controls.

  • Cambridge Audio specifies 35 W at 8 ohms for the AXA35 and lists a built-in MM phono preamp.
  • A suitable additional connection is needed for a digital source without a compatible analogue output. Also check which mains cable is supplied with the version for your country.

WiiM

WiiM describes the WiiM Amp as a streaming amplifier for passive speakers, with network playback and physical inputs.

  • WiiM lists 60 W per channel at 8 ohms, network playback methods, and line, optical and HDMI ARC inputs.
  • The listed inputs don’t include a phono input. A turntable without its own phono preamp will therefore need a suitable device in between.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect my turntable directly to any stereo amplifier?

No, not without suitable phono pre-amplification. This may be built into the turntable, a compatible amplifier or a separate device; also check your turntable’s output and cartridge.

What should I consider when positioning and connecting the amplifier?

Compare the dimensions of the exact model with the space in your furniture and follow the installation instructions. Cambridge Audio’s EU manual lists a country-specific mains cable for the AXA35; check which version is supplied when you buy it.

How can I avoid problems when playing rock music loudly?

Consider both the volume and how long you listen for. VeiligheidNL points out that both factors matter when you’re exposed to loud sound; a higher stated amplifier power rating isn’t a recommendation to listen at a higher volume.

What should I do if the product is faulty, and do I need an extended warranty?

According to the Dutch government, the seller must provide a solution if a product is faulty. The Netherlands has no fixed statutory warranty period; compare any additional warranty with your existing statutory rights and read the terms and conditions.

Can I return an amplifier bought online?

According to ACM ConsuWijzer, online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery. Check the applicable returns information; this is separate from your rights if the product is faulty.