Who is this choice relevant to?

Listeners with existing passive speakers

You want to choose an amplifier that works well with your speakers and music sources, especially when orchestral recordings move between quiet passages and peaks. Yamaha Netherlands and Denon describe model specifications that can help you make that choice.

Listeners who stream in an open-plan space

You want to play orchestral music over your network and try out settings in your own listening position. WiiM describes streaming and room settings, while KEF recommends taking speaker placement and your listening position into account too.

Listeners who also connect their TV

You’re looking for one stereo system for both music and TV. So make sure your TV output matches an available input on the amplifier; Marantz Netherlands describes HDMI eARC and HEOS for the MODEL M1.

What should you look for?

Integrated amplifier for existing sources

Choose this option if: you already use a CD player, streamer or other compatible source and mainly want to check the inputs and speaker compatibility.

Bear in mind: models such as the Yamaha A-S301 and Denon PMA-600NE don’t automatically offer the network and room settings found on streaming amplifiers.

Streaming amplifier with room settings

Choose this option if: you want to use your passive speakers directly for network streaming and be able to try settings tailored to your listening position.

Bear in mind: WiiM states that the Amp Pro doesn’t support AirPlay 2; room settings don’t guarantee the same result in every seat.

Amplifier for music and TV

Choose this option if: you want to connect a TV as well as play music, for example via HDMI eARC with the Marantz MODEL M1.

Bear in mind: check that the TV connection works with your equipment, and don’t pay for extra features you don’t need.

What to consider What should you check? Who is this important for?
Speaker compatibility and power Compare your speakers’ impedance with the load supported by the exact amplifier model. When looking at power figures, check the impedance, frequency and measurement conditions too. Denon specifies 2 × 45 W at 8 Ω over 20 Hz–20 kHz for the PMA-600NE; Yamaha Netherlands quotes 2 × 60 W at 8 Ω over 20 Hz–20 kHz for the A-S301. I want to connect my existing passive speakers correctly and allow for the dynamic passages in orchestral music. Around 33% of consumers prioritise speaker compatibility.
Stereo setup in your listening position Decide where you usually listen and start by trying different positions for both speakers. KEF recommends following the speaker manual and experimenting with the distance from walls. If my speakers are in an open-plan space, I want to tailor the stereo setup to my usual listening position. Around 25% of consumers prioritise their listening position.
Connections for music sources Note the outputs on your CD player, streamer or turntable and check that the exact model has a matching input. Denon lists digital inputs, Bluetooth and MM phono for the PMA-600NE; WiiM states that the Amp Pro doesn’t support AirPlay 2. I want to play my orchestral recordings from the sources I already use, without missing an input or streaming feature. Around 25% of consumers mainly choose based on compatibility with their music source.
TV, controls and extra features Check whether your TV has ARC or eARC and which audio formats the combination supports. For TV use with the Amp Pro, WiiM lists stereo PCM or Dolby Digital; Marantz Netherlands lists HDMI eARC and HEOS for the MODEL M1. If I want to use the same system for TV as well, the connections and controls need to work with my equipment. Around 17% of consumers prioritise TV use or additional features.

Common buying pitfalls

  • Assuming the highest wattage means you can skip checking your speakers

    Power figures may be quoted at different impedances and under different measurement conditions. The supported speaker load is a separate specification.

    Only compare figures measured on the same basis, and check your own speakers’ impedance against the manual for the exact model.

  • Expecting room settings to make speaker placement unnecessary

    The position of your speakers in relation to walls and your listening position affects stereo playback. The same result in every seat has not been demonstrated.

    Try adjusting the setup first, then use any available settings for the place where you usually listen. KEF recommends using the speaker manual as your starting point.

  • Assuming AirPlay 2 is supported based on the name or other WiiM models

    WiiM lists the standard Amp among the devices that support AirPlay 2, but the Amp Pro among those that don’t.

    If AirPlay 2 is essential for you, check the exact model name on WiiM’s list of supported devices before you buy.

Relevant brands

Yamaha

According to Yamaha Netherlands, the A-S301 is an integrated stereo amplifier with optical and coaxial digital inputs.

  • Yamaha Netherlands specifies 2 × 60 W at 8 Ω over 20 Hz–20 kHz, and a subwoofer output.
  • These specifications alone don’t determine how it will sound with your speakers in an open-plan space.

Denon

According to Denon, the PMA-600NE combines digital inputs, Bluetooth and an MM phono input.

  • The Denon manual lists a speaker impedance of 4–16 Ω for the PMA-600NE.
  • Only compare its quoted power with other models when the impedance and measurement conditions match.

WiiM

According to WiiM, the Amp Pro combines amplification, network streaming, EQ and room settings for passive speakers.

  • WiiM lists streaming, EQ and room settings as features of the Amp Pro.
  • WiiM states that the Amp Pro doesn’t support AirPlay 2; its settings don’t guarantee the same result in every room.

Marantz

According to Marantz’s Dutch product page, the MODEL M1 combines stereo amplification with HEOS and HDMI eARC.

  • Marantz specifies 100 W + 100 W at 8 Ω, 20 Hz–20 kHz and 0.05% THD with a 20 kHz LPF.
  • Check whether you actually need the TV connection and streaming features, and whether the other inputs suit your sources.

NAD

According to NAD Electronics, the C 316BEE V2 is an integrated amplifier with MM phono for compatible analogue sources.

  • NAD Electronics lists 40 W of continuous power per channel and five analogue line inputs.
  • Check that the analogue connections suit your sources; the specifications listed don’t tell you whether you need digital or network features.

Amplifiers for this topic

Related products coming soon.

Frequently asked questions

Will an amplifier with room settings help in every seat in an open-plan space?

This hasn’t been demonstrated. First decide where you usually listen and try adjusting the speaker placement. WiiM offers settings for the Amp Pro, but the manufacturer’s information doesn’t prove that you’ll get the same result in every seat.

What should I consider when connecting and positioning speakers?

Before connecting your passive speakers, check their impedance against the amplifier manual. Also follow your speaker manual when setting them up, and experiment with the distance from walls and your listening position.

Do I always need a separate phono preamp for a turntable?

Not if your chosen amplifier has a suitable phono stage: the Denon PMA-600NE and NAD C 316BEE V2 both list an MM phono input. Check which cartridge and output your turntable uses.

What are my rights when buying online or if a product is faulty?

When you buy from a business at a distance as a consumer, you will often have 14 days to change your mind, although exceptions apply. The Dutch government states that if a new, second-hand or vintage product develops a fault within the first year, the seller must prove that the consumer caused it.

Which product safety rules apply to a stereo amplifier in the Netherlands?

For electrical appliances sold in the Netherlands, the Dutch government outlines the applicable European requirements, including CE marking and an EU Declaration of Conformity. Rules for radio equipment are also relevant to models with Wi-Fi or Bluetooth. A manufacturer’s declaration has been published for the Denon PMA-600NE, WiiM Amp Pro AMP002 and Marantz MODEL M1; this does not in itself mean that every individual product listing has been tested.