Who is this choice relevant to?

Listener with a large room

Wants to play orchestral passages at their listening position without relying solely on an impressive-looking wattage figure. Speaker sensitivity, load and listening distance all play a part; Yamaha explains how to match your amplifier and speakers.

Owner of passive speakers

Wants to keep using their existing speakers, so can compare their impedance and connection requirements with those of the amplifier. Also check the information provided by the speaker manufacturer.

Listener with digital music sources

Weighs up using a separate playback source against built-in network features, and looks for connections for devices such as a TV or CD player. Denon and Marantz describe models with HEOS; check that your music service and preferred controls are supported.

What should you look for when choosing?

First, compare the amplifier with your speakers and listening distance. Then decide which sources and features you want to connect directly.

What to consider What to look for Who is this important for?
Headroom for loud passages Compare power output at the same impedance and under the same test conditions; take speaker sensitivity and listening distance into account. If I want enough headroom to play orchestral passages at my listening position, I look beyond the highest wattage figure; around 36% of consumers put this headroom first.
Compatibility with existing speakers Check whether the speakers are passive, their impedance and connection requirements, and the loads supported by the amplifier manufacturer. If you want to keep your existing passive speakers, the main priority is finding a suitable match for their load and connection requirements; around 29% of consumers make this their first concern when buying.
Playback sources and controls List the connections on your sources and check separately that your preferred network services and controls are supported. If I want to connect my music sources without unnecessary extra equipment, I look at the features I’ll actually use; around 21% of consumers prioritise sources and controls.
Positioning and setup Consider where the speakers and listening position will be, and keep the amplifier’s ventilation openings clear as instructed in the manual. If I want a straightforward, practical setup, I consider the positioning and space around the amplifier; around 14% of consumers start with the layout.

Common buying mistakes

  • Comparing a 4-ohm maximum with continuous power at 8 ohms

    Power ratings may be measured under different loads and test conditions. For example, Yamaha lists minimum RMS power at 8 ohms for the A-S701, and gives a separate maximum rating at 4 ohms; these figures are not directly comparable.

    For every wattage figure, note the impedance, frequency range and stated test conditions.

  • Choosing more power to fix an unclear stereo image

    A different amplifier won’t necessarily solve a problem with your setup.

    First, assess the speaker placement and listening position in your own room.

  • Assuming Bluetooth, a digital input and network streaming are the same feature

    These features offer different ways to connect sources or play music. If a model doesn’t have the feature you want, you may need a separate source.

    Make a note of the sources and controls you want to use, then check whether each model supports them.

Brands to consider

Yamaha

The A-S701 is an integrated amplifier with analogue and digital inputs, suited to anyone who already has a playback source.

  • For the A-S701, Yamaha specifies minimum RMS power of 100 W + 100 W at 8 ohms across 20 Hz–20 kHz, along with optical and coaxial inputs.
  • Check that the amplifier is a good match for your speakers, and whether you’ll need a separate source for network streaming.

ARCAM

The A15+ combines a range of physical connections with Bluetooth and HDMI eARC.

  • ARCAM specifies continuous power of 80 W per channel at 8 ohms for the A15+, with both channels driven across 20 Hz–20 kHz, and lists an MM phono input.
  • Check the power supply variant and the connections on your own sources; the specifications alone can’t determine how the amplifier will perform with your speakers.

Denon

The PMA-900HNE combines HEOS network features with digital inputs and phono connections.

  • Denon specifies 50 W per channel at 8 ohms and 85 W per channel at 4 ohms, plus MM/MC phono.
  • The wattage ratings apply to different loads; built-in features don’t confirm whether the model is right for your speakers.

Marantz

The MODEL 40n combines HEOS with HDMI ARC, making it suitable for a setup with network and TV sources.

  • Marantz specifies 70 W per channel and lists the network and TV connections mentioned above.
  • Check which inputs your sources need, and only compare power ratings when the load and test conditions are the same.

WiiM

The Amp Pro is a compact network amplifier for passive speakers, with app-based playback control.

  • WiiM specifies 60 W per channel at 8 ohms and 120 W at 4 ohms, along with HDMI ARC and a subwoofer output.
  • Check that the connections suit your sources. The power ratings alone don’t show how the model will perform with your speakers in a large room.

Stereo amplifiers on Joybuy

Related products will be available soon.

Frequently asked questions

How can I tell if an amplifier has enough headroom for my living room?

Start with your speakers’ sensitivity and impedance, your listening distance and the volume you want at your listening position. Then compare the amplifier’s rating at the relevant impedance. Yamaha’s guidance on matching speakers and amplifiers underlines that a wattage figure on its own isn’t enough.

Can I connect my turntable directly?

Yes, if the turntable and amplifier input together provide the phono pre-amplification required. ARCAM lists an MM phono input for the A15+, while Denon lists MM/MC phono for the PMA-900HNE; check which cartridge and output your turntable has.

What should I consider when positioning the amplifier?

Keep the ventilation openings clear and follow the manual for your chosen model. Also consider the position of your speakers and listening chair; ARCAM’s manual provides guidance on ventilation clearance.

Is there a standard two-year legal guarantee in the Netherlands?

No. According to the Dutch government, the Netherlands has no fixed legal guarantee period of two years. If a product is faulty, the seller must provide a solution. What you’re entitled to expect depends, among other things, on the product, its price and the information provided. A manufacturer’s guarantee is separate from this.

Which product safety rules are relevant when buying in the Netherlands?

EU rules may require electrical and electronic equipment to carry CE marking. According to the European Union, the manufacturer uses this marking to declare that the product meets the applicable requirements; CE is not a separate quality certificate issued by a central EU body. For a specific product, check the relevant product information and make sure you choose the correct power supply variant.