Who is this buying guide for?

Listener with existing passive speakers

You want to know whether an amplifier will work with your current speakers. Check the impedance, sensitivity and how the stated power output was measured. Cambridge Audio explains how speaker sensitivity is expressed.

Streamer with limited shelf space

You’re looking for a compact set-up for listening to orchestral recordings through supported streaming services. Check that your chosen connection method works with the exact model; WiiM and Marantz list different streaming and TV features for different models.

Listener with CDs or records

You want to connect your existing sources without adding unnecessary equipment. The connections listed for their models by Yamaha, Denon and Cambridge Audio show why you need to check that each source has a suitable input.

What should you look for when choosing?

What to consider What to look for when buying Who is this important for?
Speaker matching and dynamic passages Check the permitted impedance and sensitivity of your speakers. Compare power output at the same ohm rating and on the same measurement basis. If I want to keep using my existing passive speakers, I need to know whether the combination will suit my listening levels. Around 36% of consumers prioritise speaker matching.
Streaming and limited space Check that the exact model supports your preferred streaming service and connection method, and check its dimensions. If I want to listen to network services in a small living room and have fewer separate devices, both features matter. Around 29% of consumers prioritise streaming and a compact set-up.
Connecting existing music sources Make a note of your sources’ outputs and check whether the amplifier has suitable analogue, digital or phono inputs. If I want to connect my CD player, record player or other existing sources, I need to know in advance which inputs I’ll need. Around 21% of consumers prioritise their existing sources.
Extra equipment and the complete set-up List any missing features and additional equipment you’ll need. Also measure the space available in your cabinet. If I’d rather not add a separate streamer or other equipment, I need to be able to assess the complete set-up. Around 14% of consumers prioritise extra equipment and the overall set-up.

Common pitfalls

  • Assuming the highest wattage means better orchestral playback

    Power ratings may be based on different impedances and measurement methods. Yamaha Music explains how music can combine quiet and loud passages, so a wattage figure on its own doesn’t tell you how an amplifier will perform with your speakers.

    Compare power ratings using the same measurement basis, and check the impedance and sensitivity of your own speakers.

  • Assuming models in the same streaming range have the same features

    According to WiiM, the WiiM Amp supports AirPlay 2, but the WiiM Amp Pro does not. A feature available on one model isn’t automatically available on another.

    Check the features of the full model number and make sure it supports the service you use.

  • Choosing an analogue amplifier without checking all your sources

    Digital and analogue sources need suitable connections. Cambridge Audio also states that the AXA35’s USB connection is not an audio input.

    Before buying, draw up a connection diagram for your sources and compare it with the inputs on the exact model.

    If a required input is missing, you may need a separate source device or another suitable addition.

  • Confusing an extended warranty with your statutory rights

    According to the Dutch government, there is no fixed time limit for statutory guarantees in the Netherlands. Additional cover is separate from your statutory rights.

    Check what extra rights the cover offered provides and who your seller is if something goes wrong.

Brands to compare

Yamaha

The A-S301 is worth considering if you’re looking for a traditional set-up with analogue and digital sources.

  • Yamaha Netherlands lists the A-S301 at 60 W + 60 W continuous into 8 ohm across 20 Hz–20 kHz, with optical and coaxial inputs and a subwoofer output.
  • Its stated dimensions are 435 × 151 × 387 mm. Check that it will fit in the space available; the stated power output is not a listening test.

WiiM

The WiiM Amp and Amp Pro are all-in-one streaming amplifiers for passive speakers.

  • WiiM lists both models at 60 W per channel into 8 ohm, with HDMI ARC.
  • According to WiiM’s support information, the Amp supports AirPlay 2, but the Amp Pro does not. Check the features of the exact model.

Denon

The PMA-600NE is worth considering if you want to connect digital sources, Bluetooth and a compatible MM record player.

  • Denon Netherlands lists 45 W per channel into 8 ohm, digital inputs, Bluetooth and an MM phono input.
  • The stated 70 W per channel into 4 ohm is for a different load, so it isn’t directly comparable with the 8-ohm rating. Assess network streaming separately.

Cambridge Audio

The AXA35 is an analogue-focused option for a suitable record player or another analogue source.

  • Cambridge Audio lists 35 W per channel and a built-in phono stage.
  • Cambridge Audio recommends 8-ohm speakers for this model and advises against using 4- or 6-ohm speakers. The manufacturer says the AXA35 has no sub-out or pre-out.

Marantz

The MODEL M1 is a compact streaming amplifier to compare if you’re looking for HEOS streaming or TV integration.

  • Marantz lists HEOS, HDMI eARC, a subwoofer output and 100 W per channel.
  • These are manufacturer specifications, not an independent assessment of how the model plays orchestral recordings. Check that its features suit your speakers and how you plan to use it.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I need a stereo amplifier as well as my existing speakers?

Passive speakers need an amplifier. If you have active speakers with built-in amplification, first check which connections they accept; don’t automatically buy an integrated amplifier as well.

Can I connect 4- or 6-ohm speakers to a Cambridge Audio AXA35?

Cambridge Audio recommends 8-ohm speakers for the AXA35 and advises against 4- or 6-ohm speakers because of the risk of overheating and damage. This is a limitation specific to this model, not a rule that applies to all amplifiers.

How do I connect the speakers correctly?

Follow the manual for the exact model, matching left and right correctly and keeping the positive and negative terminals aligned. Cambridge Audio warns that incorrect polarity on the AXA35 can result in weak, out-of-phase sound with little bass. Only use a device with the voltage specified for that particular unit.

What can I do if there’s too much bass in my small living room?

First, check the speaker placement and settings. WiiM describes RoomFit and, when using a subwoofer, tuning settings for supported WiiM devices. This isn’t a universal rule for speaker placement or a guarantee of a particular result.

What are the rules on guarantees and cooling-off periods in the Netherlands?

According to the Dutch government, there is no fixed time limit for statutory guarantees in the Netherlands: what you can expect depends, among other things, on the product and normal use. For eligible online distance purchases from a business, you generally have a 14-day cooling-off period. Check the terms of your specific purchase.

What product safety rules apply to electrical devices?

Electrical and electronic devices placed on the market in the Netherlands must meet the applicable European requirements. Dutch government information includes safety, electromagnetic compatibility, CE marking and an EU declaration of conformity. Rules for radio equipment may also apply to wireless devices; a brand or model name alone doesn’t show that a particular unit meets all the requirements.