Who is this choice relevant to?

Listener with existing passive speakers

You want to play orchestral passages through your current speakers and match the connections, impedance and power specifications of both devices. Yamaha Nederland and NAD Electronics Support describe specifications that are relevant here.

Listener in a reverberant loft

You want to follow details clearly from your listening position and take the room acoustics into account, rather than looking only at amplifier power. The Acoustical Society of America explains how room volume and absorbent materials relate to reverberation time.

Listener with multiple music sources

You switch, for example, between streaming and a separate CD player, and want to choose between built-in network features and connections for separate devices. Yamaha and Denon describe models with different connections and network features.

What should you look for in a stereo amplifier?

First compare your speakers’ power requirements, then assess your listening space and choose the connections that suit your music sources.

What to consider What should you check? Who is this important for?
Speaker matching Check the nominal impedance and recommended power handling of your passive speakers. Compare amplifier ratings only when the impedance and measurement conditions match. I want to drive my existing passive speakers suitably, even during orchestral peaks. Around 36% of consumers prioritise speaker matching.
Room acoustics Listen to quiet passages and peaks from your usual listening position; investigate reverberation or a lack of clarity before blaming the amplifier. If the loft is reverberant, I want to understand what I’m hearing from my listening position before choosing an amplifier with more power. Around 29% of consumers prioritise room acoustics.
Streaming Check that the exact model supports your music service and preferred controls. Distinguish between network streaming and a separate source. I want to play orchestral recordings through a suitable music service without an extra streamer. Around 21% of consumers prioritise streaming convenience.
Existing sources Make a note of each device’s output and compare it with the inputs on the amplifier model. For vinyl, also check that the phono connection suits the cartridge. I want to keep using my CD player, record player or other source without paying for features I won’t use. Around 14% of consumers prioritise connections for existing sources.

Common buying mistakes

  • Comparing wattage without considering impedance and measurement conditions

    A higher quoted figure doesn’t, by itself, prove that an amplifier is a better match for your speakers. Models may quote their power at different loads or under different measurement conditions.

    For each model, check the Ω rating and measurement conditions, and check your speakers’ specifications too.

  • Expecting a different amplifier to solve your loft’s acoustic problems

    What you hear is also affected by the room and its furnishings. Room correction for the NAD C 389 is optional and, according to NAD, has a limited range; this doesn’t prove that other acoustic problems will disappear.

    Assess the sound from your listening position and distinguish between a connection or speaker problem and a room problem.

    The C 389’s room correction requires a separately available module; other acoustic treatments may also be worth considering.

  • Assuming every amplifier has built-in streaming or phono

    Models differ in their network features and phono connections. You may need a separate streamer or a suitable phono preamplifier if the amplifier doesn’t have the connection your source requires.

    Before comparing models, make a note of the devices and music services you actually use, and check the connections on the exact model.

Relevant amplifier brands to consider

Yamaha

The A-S701 is an example of an integrated amplifier for separate sources, with analogue and digital connections.

  • Yamaha quotes a minimum of 2 × 100 W RMS at 8 Ω over 20 Hz–20 kHz for the A-S701, with optical and coaxial inputs.
  • These manufacturer specifications don’t confirm whether the amplifier is suitable for speakers with unknown specifications. Built-in network streaming isn’t substantiated for this model.

Denon

The PMA-900HNE combines an integrated stereo amplifier with HEOS network features and connections for other sources.

  • Denon quotes 50 W per channel at 8 Ω and 85 W at 4 Ω, along with digital inputs and MM/MC phono.
  • Check that your music service is supported. The power ratings are specified at different loads, so they aren’t directly comparable with other figures.

NAD

The C 389 is an integrated amplifier with digital connections and options for future upgrades.

  • NAD quotes 130 W per channel and offers an optional MDC2 BluOS-D expansion with streaming and limited Dirac Live room correction.
  • The module and its associated features aren’t included as standard. NAD quotes a range of up to 500 Hz for room correction; this doesn’t prove what results you’ll get in your loft.

Marantz

The MODEL 50 is an analogue integrated amplifier for compatible separate sources, including a record player with an MM cartridge.

  • Marantz quotes 70 W per channel, an MM phono input and stereo pre-out connections.
  • According to the product specifications, the MODEL 50 doesn’t have HEOS or HDMI; bear this in mind if you need those features.

Cambridge Audio

The CXA81 Mk II offers an integrated solution with connections for separate analogue and digital sources.

  • Cambridge Audio quotes 80 W per channel and RCA, XLR, optical, coaxial and USB audio connections.
  • The available product information doesn’t substantiate built-in network streaming or suitability for specific speakers.

Stereo amplifiers at Joybuy

Related products coming soon.

Frequently asked questions

Can I choose an amplifier based on wattage alone?

No. Compare your speakers’ impedance and recommended power handling with the manual for the exact model too. Also check that power ratings are quoted at the same impedance and under the same measurement conditions.

Will room correction help with reverberation in my loft?

Not necessarily. For the C 389, NAD offers Dirac Live Limited Bandwidth up to 500 Hz via an optional module. This feature isn’t included as standard, and doesn’t prove that all reflections or reverberation in your room will improve. Also assess the furnishings and listening position.

How do I connect existing speakers and a TV?

Check the speaker impedance and follow the wiring instructions in the manual; loose strands of wire can cause a short circuit. If you’re using a digital TV output with a Cambridge Audio CXA model, the manufacturer says the TV output should be set to PCM or stereo rather than Dolby or surround.

What warranty applies when a consumer in the Netherlands makes a purchase?

According to the Rijksoverheid, you’re entitled to a product that works properly, but there’s no fixed statutory warranty period in the Netherlands. If a product is faulty, the seller is your point of contact; a manufacturer’s warranty is in addition to your statutory rights.

Can I return an amplifier bought online?

According to the Rijksoverheid, when you buy from a business at a distance, you’ll often have a 14-day cooling-off period. Check who the seller is and which terms apply to your purchase; according to the guidance cited, an online purchase from a private individual isn’t a distance sale.

Is CE marking relevant for an electrical appliance sold in the Netherlands?

Yes. The Rijksoverheid states that products such as electronic devices must have CE marking in the EU. Also check that the version of the appliance being offered is suitable for use in the Netherlands; the marking doesn’t tell you which speakers it will work with.