Which amplifier is right for you?

Opera listener with existing speakers

You want an amplifier that suits your passive speakers and your usual listening volume. Compare the power rating at the stated impedance and test conditions, rather than looking at the wattage alone.

Opera CD listener

You use a separate CD player and want to connect it via its analogue or digital output. Check which outputs your player has and whether the amplifier offers the corresponding input.

Opera streamer with limited space

You want to stream opera in a compact setup. Check the exact model for the services, connections and playback features you use, and measure the space where the amplifier will go.

What should you look for when choosing?

Traditional stereo amplifier

A good fit if: you mainly use a separate CD player or another wired source with existing passive speakers.

Bear in mind: check the input and the depth of the casing; you may need a separate source for network streaming.

Compact network amplifier

A good fit if: you want to stream opera directly and are looking for an all-in-one device with amplification and network playback.

Bear in mind: check that your streaming service and playback method are supported; for optical or HDMI ARC audio, the manufacturer specifies stereo PCM for the WiiM Amp.

What to consider What should you check? Who is this important for?
Compatibility with your speakers Note down the model and nominal impedance of your passive speakers, then compare them with the amplifier’s manual and stated load. If you want to keep using your existing speakers, look for a combination that the manufacturer says is suitable for them. This is a priority for around 31% of consumers.
Connecting your CD player Check whether your CD player has an analogue line output or a digital output, and whether the amplifier offers the corresponding input. If your CD player is your main source, you’ll want to connect it directly to a compatible input. Around 25% of consumers prioritise this connection.
Streaming directly Check that the exact model supports your preferred streaming service and playback method; also see whether gapless playback is available this way. If you mainly stream, you’ll want to play your recordings through the amplifier and know which features your service supports. Streaming is the main priority for around 25% of consumers.
Size and controls Measure the available width, height and depth, and check the model’s placement instructions and controls. If the amplifier is going in a small living room or an existing cabinet, you’ll want to know in advance whether it will fit and how to operate it. Around 19% of consumers consider this a deciding factor.

Common buying mistakes

  • Comparing wattage figures at different impedances directly

    Power ratings may be measured at different loads. A figure at 4 ohm is therefore not necessarily comparable with a rating at 8 ohm.

    Compare the power rating at the stated impedance and under the other stated test conditions, then check that the combination suits your speakers.

  • Confusing Bluetooth with network streaming

    Bluetooth and built-in network playback are different features. A Bluetooth input doesn’t mean your amplifier also supports the streaming services you want.

    First decide how you want to play opera, then check the service and connection options for the exact model.

  • Not matching the CD player’s output to the amplifier’s input

    A separate CD player needs a suitable analogue or digital connection. An amplifier won’t play CDs automatically if the connections don’t match.

    Before buying, check your player’s outputs and the inputs available on the amplifier model.

Relevant brands to consider

Yamaha

The A-S301 is a wired stereo amplifier with analogue and digital connections, making it a relevant choice for a setup with separate sources.

  • Yamaha Netherlands specifies 2 × 60 W RMS at 8 ohm and 20 Hz–20 kHz, plus optical and coaxial inputs.
  • The stated power rating and dimensions of 435 × 151 × 387 mm alone don’t determine whether the amplifier will suit your speakers or cabinet.

Denon

The PMA-600NE combines connections for wired sources with Bluetooth.

  • Denon lists digital inputs, Bluetooth, an MM phono input and 45 W per channel at 8 ohm.
  • The manufacturer also lists 70 W per channel at 4 ohm; don’t compare these ratings without allowing for the different loads. Bluetooth isn’t the same as network streaming.

WiiM

The WiiM Amp combines amplification with network playback and can also connect to a CD player with an analogue line output.

  • WiiM lists features including gapless playback and Line In for the Amp; according to WiiM, you can connect a CD player with an analogue line output via RCA.
  • The WiiM Amp and Amp Pro are different models. For optical or HDMI ARC audio on the standard Amp, WiiM specifies stereo PCM.

Marantz

The PM6007 is a wired option for a stereo system with multiple sources.

  • Marantz Netherlands specifies 2 × 45 W RMS at 8 ohm and lists five analogue inputs and digital inputs.
  • Compare the stated features with your own connection requirements; the manufacturer’s descriptions of sound are not an independent listening comparison.

Cambridge Audio

The AXA35 is a wired amplifier with a built-in phono stage.

  • Cambridge Audio lists 35 W per channel and a built-in phono stage.
  • According to the support information, the AXA35 has no subwoofer or pre-out. If buying a unit offered in the Netherlands, check the version and the supplied power cable.

Amplifiers on Joybuy

Related products coming soon.

Frequently asked questions

Can I connect my separate CD player to a network amplifier?

Yes. According to WiiM, you can connect a CD player with an analogue line output to Line In on the WiiM Amp via RCA. Check the outputs on your own player; you’ll need a suitable input for a digital output.

What should I check before connecting the amplifier?

First, check your speakers’ specifications and the manual for the exact amplifier model. For audio via optical or HDMI ARC from a TV or Blu-ray player, WiiM specifies stereo PCM for the WiiM Amp.

Do I have a cooling-off period and a guarantee when buying online in the Netherlands?

For a standard online product purchase, you generally have up to 14 days after delivery to change your mind, according to ACM ConsuWijzer; exceptions may apply. The Dutch government states that the seller is responsible for ensuring a product is in good condition and that there is no fixed statutory guarantee period in the Netherlands.

What product rules apply to an amplifier sold in the Netherlands?

According to the Dutch Ondernemersplein, electrical and electronic devices must meet the applicable European requirements, including rules on safety and electromagnetic compatibility. The responsible manufacturer must provide the required CE marking and EU declaration of conformity; this does not confirm that a specific item being sold complies.