Listeners with existing passive speakers
You want to keep your speakers, so first check their impedance and make sure their connections are compatible with the amplifier.
Start with your existing passive speakers and the output available on the source you use to play your soundtrack. A traditional amplifier is a good fit if you already have a suitable player; choose a model with network features or HDMI ARC if you need those playback options. In an open-plan space, speaker placement and your usual listening position deserve at least as much attention as the stated power output. Remember to consider your neighbours and local regulations, too.
You want to keep your speakers, so first check their impedance and make sure their connections are compatible with the amplifier.
You want to know whether you can connect your source directly, and whether you need HDMI ARC, a digital input or built-in network features.
You want to enjoy stereo from your usual listening position without trying to make up for an awkward setup by turning up the volume. Genelec explains how room acoustics and speaker placement affect the sound at your listening position.
First, make sure the amplifier works with your speakers and audio source. Then decide whether you need a separate player, network streaming or a TV connection.
| What to consider | What should you look for? | Who is this important for? |
|---|---|---|
| Compatible speaker connection | Check the supported impedance and any settings for your speakers. Only compare power ratings when the impedance and measurement conditions are the same. | If I want to keep my passive speakers, I first need to know whether they’ll work with the amplifier. Around 36% of consumers make speaker compatibility their top priority. |
| Audio source connection | Check the output on your TV or player and make sure the amplifier has the right input. If you want network streaming, also check that it supports your preferred service. | If I want to play my soundtrack directly from my TV, player or streaming service, the connection needs to be right. Around 29% of consumers put source connectivity first. |
| Stereo at your listening position | Decide where you usually listen and whether you can position both speakers well there. Try adjusting the setup before turning up the volume. | If I mainly listen from one spot in an open-plan living room, I want both speakers to work well there. Around 21% of consumers make their listening position their top priority. |
| What you need for the complete setup | Make a list of your existing source equipment and connection cables. Check whether you’ll need a separate player or streamer for the playback setup you want. | I want to know in advance what else I’ll need to get the setup I want working. Around 14% of consumers put the cost of the complete setup first. |
Yamaha specifies 60 W + 60 W at 8 Ω for the A-S301 under stated measurement conditions. Audizio lists a maximum of 2 × 200 W for the AD220B. These figures aren’t directly comparable.
Only compare figures measured at the same impedance and under the same conditions, and first check that the amplifier is compatible with your speakers.
An optical or coaxial input connects a source to the amplifier, but it isn’t the same as network streaming.
First decide which device or service you want to play your soundtrack from, then choose the right connection.
Speaker placement and your listening position affect what you hear. Louder music can also disturb your neighbours, and council rules may vary.
First try adjusting the speaker setup and choosing a suitable volume. Be considerate of your neighbours and check the rules that apply to your address.
The Yamaha A-S301 is an integrated amplifier for existing sources and passive speakers.
According to WiiM, the WiiM Amp combines network features with amplification for passive speakers and a TV connection.
According to Denon, the Denon PMA-900HNE combines analogue and digital sources with HEOS network streaming.
According to Marantz, the Marantz STEREO 70s is a two-channel receiver for music and TV or HDMI sources.
According to the manufacturer, the Audizio AD220B has Bluetooth and analogue and digital inputs.
Yes, if your TV’s output matches an input on the amplifier model you choose. Yamaha lists an optical input for the A-S301; the WiiM Amp uses HDMI ARC and specifies Stereo PCM for TV audio.
Check the supported impedance and any settings for the exact model. The EU manual for the Marantz STEREO 70s describes a setting for 4–6 Ω speakers. Denon says to unplug the PMA-900HNE before connecting it and to make sure loose cable strands can’t cause a short circuit.
First try adjusting the position of both speakers and your listening spot. Genelec explains how room acoustics, reflections and placement affect the sound; studio monitor guidelines can’t guarantee a particular result in every flat.
Check the rules that apply to your council and address. The Dutch government says that noise nuisance between neighbours is covered by local by-laws in many municipalities, and recommends trying to agree on a solution with your neighbours first.
According to ACM ConsuWijzer, online consumer purchases generally come with a cooling-off period of up to 14 days after delivery, with some exceptions. If a product doesn’t meet your reasonable expectations, the Netherlands Authority for Consumers and Markets says the seller is responsible for the statutory guarantee.