Loft listener in a room with hard surfaces
If you listen to chamber music from one spot in a room with surfaces such as glass or concrete, consider speaker placement and room acoustics too. Genelec describes hard surfaces as reflective.
Choose a stereo amplifier based on your passive speakers and the source you use to play chamber music; no amplifier can remove reflections from glass, concrete or other hard loft surfaces on its own. A wired model suits connected sources, Bluetooth lets you play directly from a compatible device, and built-in streaming provides network control. Also check the speaker load, connections and specification of the exact model.
If you listen to chamber music from one spot in a room with surfaces such as glass or concrete, consider speaker placement and room acoustics too. Genelec describes hard surfaces as reflective.
If you want to keep your current speakers, compare their connections and specifications with those of the exact amplifier model before choosing.
Your choice also depends on how you play music: through a connected player, Bluetooth or a supported network service.
A good fit if: you mainly use a CD player, a turntable with a suitable MM phono connection or another wired source.
Bear in mind: with the Marantz PM6007, you’ll need a separate compatible source for network services.
A good fit if: you want to play music directly from a compatible phone or other Bluetooth device, as well as from wired sources.
Bear in mind: Bluetooth isn’t the same as built-in network streaming; check which sources and controls you need.
A good fit if: you want to use your passive speakers with supported network services and value network control or adjustable EQ.
Bear in mind: check that your music service is supported; room correction doesn’t replace the need to consider reflections or speaker placement.
Genelec describes hard surfaces as reflective and notes that speaker placement can affect stereo imaging. So compare amplifiers only after you’ve considered your listening position, existing speakers and music sources.
| Consideration | What should you check? | Who is this important to? |
|---|---|---|
| Room and listening setup | Decide where you’ll listen and whether you can arrange the speakers symmetrically; then consider whether you need EQ or room correction. | If I listen to chamber music in a reflective loft, I want to know how the room and speaker placement affect the sound. Around 33% of consumers say room and listening setup are their main consideration. |
| Speaker compatibility | Check whether your speakers are passive and compare their specifications with the load and power rating of the exact model. | If I want to keep my current passive speakers, I’ll first check that their connection and load are suitable for the amplifier. For around 25% of consumers, compatibility comes first. |
| Music source and control | List the sources you use and want to use; check the input, service support and controls for each model. | If I want to play my recordings through a particular player, Bluetooth device or network service, I’ll look for the right connection or support. Around 25% of consumers prioritise their choice of source. |
| Equipment and service you’ll need | Compare the components you’ll need and find out which retailer to contact if something goes wrong. | If I want to avoid unexpected purchases, I’ll check whether I need an additional source or phono preamp, and who is responsible if there’s a fault. Around 17% of consumers focus mainly on extra equipment and service. |
Hard surfaces and speaker placement affect your listening experience regardless of the amplifier’s stated power output.
First, assess your listening position and setup. Only then compare power output, and only for the same speaker load and measurement conditions.
The Denon PMA-600NE lists Bluetooth, while the WiiM Amp Pro lists network features. These are different ways to play music.
Before buying, check whether the amplifier supports the music service you want and how you’d like to control playback.
The built-in phono inputs mentioned here are MM inputs; whether the connection is suitable depends on your turntable’s cartridge and any phono preamp it may have.
Check the cartridge type and whether the turntable already has a phono preamp.
You may need a separate device if the phono preamplification isn’t suitable.
The A-S501 is a wired integrated amplifier with optical and coaxial digital inputs.
The PM6007 is a wired model with MM phono and digital inputs for connected sources.
The PMA-600NE combines Bluetooth, digital inputs and MM phono.
The Amp Pro is a streaming amplifier for passive speakers, with network features and adjustable EQ.
The C 316BEE V2 is an alternative for use with analogue sources and MM phono.
No, not on its own. Hard surfaces reflect sound, so also consider your listening position, speaker placement and, where needed, acoustic treatment. Genelec notes that calibration can’t solve every acoustic problem.
That depends on your turntable and the input. An MM phono input is suitable for a turntable with a compatible MM cartridge and no built-in phono preamp; check the cartridge and whether the turntable already has a preamp.
First, check your speaker specifications and the manual for the exact amplifier model. Then choose a listening position and arrange the speakers so their positions are as symmetrical as possible in relation to where you sit and nearby surfaces. Genelec’s placement guidelines are for studio monitors and aren’t a fixed requirement for every loft.
When you buy from a retailer, you’re covered by the legal guarantee: the retailer must offer a solution if the product is faulty. The Dutch government states that there’s no fixed statutory guarantee period in the Netherlands. For distance purchases from a business, a 14-day cooling-off period applies in many cases; check the terms and any exceptions for your specific purchase.
Electrical equipment must meet the applicable requirements. According to Ondernemersplein, the Dutch government’s business information portal, the manufacturer affixes a CE mark after the device has been tested and meets the requirements. Models with Wi-Fi or Bluetooth must also meet the applicable requirements for radio equipment. Check the documentation for the exact model.