Listener with passive speakers
You want to keep using your existing speakers and are looking for an amplifier that matches their specifications and connections.
Start with your passive speakers and the connections on your audio source: the amplifier needs to match the speakers and connect to your sources. A conventional stereo amplifier suits existing wired equipment. Choose an amplifier with network playback if you want to use those features, and check the placement instructions for your kitchen-diner whichever option you choose.
You want to keep using your existing speakers and are looking for an amplifier that matches their specifications and connections.
You play orchestral recordings from a CD player or separate streamer, for example, and want to choose the inputs you need without paying for features you won’t use.
You want to play orchestral recordings from supported network sources through passive speakers, while also considering ease of use and a suitable place for the equipment.
Choose this option if: your existing CD player, streamer or other wired source plays the music, and the amplifier has suitable inputs.
Trade-off: you may need a separate streamer for network services.
Choose this option if: you sometimes want to play music directly from a phone, as well as using wired sources.
Trade-off: Bluetooth is not the same as built-in Wi-Fi network streaming.
Choose this option if: you want to listen through passive speakers using supported network services or other network sources.
Trade-off: check that your preferred service and control method are supported. According to WiiM, the WiiM Amp Pro does not have AirPlay 2, while the standard WiiM Amp does.
| What to consider | What should you check? | Who is this most relevant to? |
|---|---|---|
| Speaker compatibility | Check the speaker impedance and both manufacturers’ recommendations. Compare power ratings only at the same load and under the same test conditions. | If I want to keep my passive speakers, I’ll first check which amplifier is suitable according to the specifications. Around 36% of consumers put speaker compatibility first. |
| Sources and controls | Make a note of your source’s connections and check that the amplifier has the ones you need. If you’ll be using a network, also check that your preferred service and controls are supported. | If you want to play orchestral recordings from a CD player, phone or network, it helps to have connections and features suited to that source. Around 29% of consumers give source choice and controls the highest priority. |
| Placement in a kitchen-diner | Measure the available space, including room for cables, and follow the ventilation and safety instructions for the model you choose. | If the amplifier will be in a kitchen area, I want to know in advance whether the chosen spot has enough room and meets the safety instructions. Around 21% of consumers put finding a suitable location at the top of their list. |
| Building and expanding your system | List the equipment you already have and check which sources and connections you may want to add later. | If you want to decide which components you need now and expand your system later, look at the complete set-up rather than just the amplifier. Around 14% of consumers make this their first consideration. |
Power ratings aren’t always given under the same conditions. A wattage figure on its own doesn’t tell you whether an amplifier is suitable for your speakers.
Read the speaker recommendations and compare the stated impedance, frequency range and test conditions.
Bluetooth and network streaming are different ways to play music. According to Denon, the Denon PMA-600NE has Bluetooth; the WiiM Amp Pro has specified network features.
First, work out where your orchestral recordings are stored and how you want to play them. Then check that the amplifier supports that connection.
An amplifier that fits on a shelf isn’t automatically safe to use in a kitchen-diner. Water, heat and blocked ventilation can make a location unsuitable.
Check the instructions for the exact model before choosing a cabinet or shelf. Yamaha’s guidance for the A-S301, for example, warns against using it near water or heat sources, or with its ventilation openings blocked.
The A-S301 is an integrated stereo amplifier worth considering if you use existing wired or digitally connected sources.
The PMA-600NE is an option if you want to combine wired sources with Bluetooth from another device.
The PM6007 is a conventional integrated amplifier worth considering if you want to connect several existing sources.
The Amp Pro is worth considering if you want to combine passive speakers with network playback in one device.
No. Don’t assume that active speakers connect in the same way as passive speakers. Check the speaker type and the recommended input. The speaker outputs on the amplifiers described here are intended for passive speakers.
Follow the placement instructions for the model you choose. For the A-S301, Yamaha advises, among other things, not to use the unit near water, to keep the ventilation openings clear and to place it away from heat sources. Don’t assume these model-specific instructions apply to other amplifiers.
According to the Dutch government’s Business.gov.nl website, electrical and electronic equipment must comply with the applicable European rules. Where required for the device, the manufacturer must affix a CE mark and draw up an EU Declaration of Conformity. The applicable rules for radio equipment are also relevant to models with Bluetooth or Wi-Fi. A declaration for one model does not, by itself, prove that every version offered complies.
No, you don’t need to buy an extended warranty to have a legal guarantee. ACM ConsuWijzer explains that the legal guarantee exists alongside the seller’s guarantee. An additional warranty you buy may have different terms or offer extra cover.