Quiet evening listener
You play jazz albums quietly and want to assess or adjust the balance of bass and treble without turning up the overall volume. Yamaha describes the A-S301 as having a separate loudness control.
First, choose a stereo amplifier to suit your passive speakers and album source. Then decide whether you need separate loudness or tone controls at your preferred low listening volume. A model with an MM phono input, a traditional amplifier with tone controls and a streaming amplifier each cater for different source needs; wattage alone won’t tell you how jazz sounds at low volume.
You play jazz albums quietly and want to assess or adjust the balance of bass and treble without turning up the overall volume. Yamaha describes the A-S301 as having a separate loudness control.
You want to connect a turntable and check that the cartridge, any built-in phono preamp and the stereo amplifier’s input are compatible. Denon lists an MM phono input for the PMA-600NE, while WiiM explains when the Amp needs an external phono preamp.
You want to keep your passive speakers and find an amplifier that suits their load and has the right inputs for your album sources. Check the specifications of your speakers and the connections on the specific model.
| Consideration | What to look for | Who is this important to? |
|---|---|---|
| Tonal balance at low volume | Check whether loudness can be adjusted separately and whether a Direct mode bypasses the tone controls. | I want to play jazz quietly and adjust the tonal balance to suit my listening volume. For around 36% of consumers, these controls are the top priority. |
| Connecting a turntable | Check whether the cartridge is compatible with an MM phono input, or whether the turntable already has a phono preamp. | When playing vinyl, I want to know whether I can connect my turntable directly or whether it needs a preamp first. Around 29% of consumers prioritise having the right connection for their turntable. |
| Compatible speakers | Check the permitted speaker load and compare power ratings only when the impedance and measurement conditions are the same. | I want to keep my existing passive speakers and make sure the amplifier is suitable for their load. For around 21% of consumers, speaker compatibility is the top priority. |
| Digital sources and control | Check whether the amplifier supports the optical or coaxial connection, streaming service and controls you want. | If I mainly stream digital albums, I want suitable connections and controls without unnecessary extra equipment. Around 14% of consumers put digital access and ease of control first. |
On the Yamaha A-S301, Pure Direct bypasses the tone and loudness controls, according to Yamaha. So this mode won’t give you the correction you’re trying to set with those controls.
Compare the settings with and without correction at your usual low listening volume.
A turntable without its own phono preamp won’t automatically output a signal suitable for a line input. WiiM states that the Amp has no built-in phono input.
Check whether your turntable has a built-in preamp. If not, compare an amplifier with a suitable phono input against using a separate phono preamp.
A turntable with only a phono output may need a separate phono preamp.
Power ratings can refer to different speaker loads and measurement conditions. For example, Yamaha lists an RMS rating for the A-S301 at 8 ohms, with the corresponding frequency and distortion conditions.
Before comparing models, check the impedance and measurement conditions for each power rating.
The Rotel A11MKII manual warns that ventilation openings must remain clear and that the unit needs enough space inside a cabinet to dissipate heat.
Check the placement instructions for your chosen model before assessing the space available.
The A-S301 is worth considering if you’re looking for a traditional integrated amplifier with a separate loudness control and optical or coaxial inputs. Yamaha lists these features for this model.
The PMA-600NE is worth considering if you want to combine a compatible MM turntable, digital sources and Bluetooth. Denon lists these connections and features for the model.
The A11MKII is worth considering if you’re looking for MM phono, digital inputs, Bluetooth and tone controls in one traditional amplifier. Rotel lists these features for this model.
The WiiM Amp is worth considering if streaming and app control for passive speakers are your priorities. WiiM lists network features and EQ for the Amp.
The MODEL 40n is worth considering if you want to combine streaming and an HDMI ARC connection for a television with an integrated stereo amplifier.
No. First check that the amplifier suits your speakers and sources, and that you can adjust the sound to suit your listening volume. Compare wattages alongside the relevant impedance and measurement conditions; those figures alone won’t tell you how jazz sounds at low volume.
According to WiiM, connect a turntable with its built-in phono preamp switched on to the RCA line input. If the turntable has only a phono output, connect an external phono preamp between the turntable and the amplifier first.
Keep the ventilation openings clear and follow the placement instructions for your chosen model. The Rotel A11MKII manual says to clean the casing with a dry cloth only and leave internal maintenance to qualified technicians; for other models, follow their own manuals.
For eligible distance purchases from a business, the Dutch government generally provides a 14-day cooling-off period. This doesn’t automatically apply to purchases from a private individual, so check the terms that apply to your purchase.
Yes. Electrical equipment that falls within the scope of the EU Low Voltage Directive must carry a CE mark when placed on the EU market. Check the marking and safety information for the specific version; the model name alone doesn’t establish which version you’ll receive.