Owner of passive speakers
You want to keep using your existing speakers and are checking the connections and how well they pair with the amplifier. Denon, WiiM and Fosi Audio describe the models mentioned here as suitable for passive speakers.
First, choose an amplifier that suits your existing speakers and the output of the player holding your guitar recordings. For listening at a low volume in a shared lounge, easily accessible volume controls and the playback connection you need matter more than a single maximum wattage figure. If you’re considering network features, check that the service and controls you want are supported.
You want to keep using your existing speakers and are checking the connections and how well they pair with the amplifier. Denon, WiiM and Fosi Audio describe the models mentioned here as suitable for passive speakers.
You want to play guitar recordings at a modest volume and value easily accessible volume or tone controls. Yamaha and Fosi Audio mention adjustment options, but these don’t guarantee a particular sound in your room.
You want to know whether Bluetooth playback will do, or whether you need a specific network service and app. Denon mentions Bluetooth, while WiiM describes network features for its Amp models.
Start with your speakers and the output from your music source. Then choose the controls and extra features you’ll actually use at home.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Connecting your existing speakers | Make a note of your speaker model and check the impedance and connection instructions in the speaker and amplifier manuals. | If I want to keep my passive speakers, I want to know in advance whether they can be connected to the amplifier. Around 31% of consumers say compatibility is their top purchasing priority. |
| Input for your music source | Check both the output on your player and the input on the amplifier. If you’re using network playback, check that your preferred service is supported too. | If my guitar recordings are on a phone or player, I want a suitable way to play them. For around 31% of consumers, connecting to a music source is the top purchasing priority. |
| Controls for low-volume listening | Check whether the volume and any tone controls are easy to reach on the unit or through the controls you plan to use. | When several people use the lounge, I want to be able to adjust the volume easily. Around 23% of consumers prioritise controls for quiet listening in a shared space. |
| Size and placement | Measure the available space and allow room for the power supply, speaker cables and any separate streamer. | If the amplifier is going in a shared room, I want to know in advance how much space the whole setup will take up. For around 15% of consumers, a compact, straightforward setup is the top purchasing priority. |
Power ratings measured on different bases can’t be compared directly. Fosi Audio gives the BT20A Pro’s maximum power at 4 Ω; Marantz specifies the PM6007’s RMS power at 8 Ω across 20 Hz–20 kHz.
Only compare ratings measured on the same basis and under the same load, and check your speakers’ requirements too.
Bluetooth isn’t the same as Wi-Fi, Ethernet or playback through a supported network service. Denon mentions Bluetooth for the PMA-600NE; WiiM also describes network features for its Amp models.
Decide in advance whether you want to play from a phone via Bluetooth or need a specific network service.
If the amplifier you choose doesn’t support your preferred network connection, you may need a separate streamer.
According to Fosi Audio, the BT20A Pro has an external power adaptor and Bluetooth and RCA inputs. Check that the source and available connections suit your setup.
Check which adaptor comes with the version on offer and make sure you have enough room for the power supply, cables and any additional connection equipment.
The A-S301 is a wired integrated amplifier with digital inputs and physical controls.
According to Denon, the PMA-600NE combines Bluetooth, digital inputs and an MM phono input.
The Amp range is designed for passive speakers and combines amplification with network playback features.
The AXA35 is an analogue-focused stereo amplifier with RCA inputs and physical tone controls.
The BT20A Pro is a compact Bluetooth and RCA amplifier for passive speakers.
The PM6007 is an integrated amplifier for wired sources, with digital and MM phono inputs.
Not to drive the speakers themselves: active speakers have their own amplification. According to the manufacturers, the WiiM Amp and Fosi Audio BT20A Pro are designed for passive speakers. Check what type of speakers you have before choosing an amplifier.
Compare your player’s output with the inputs on the exact amplifier model you’re considering. A source with a compatible RCA output can connect to an RCA input. For a digital source, the amplifier needs the right digital input; otherwise, you may need additional equipment.
Decide in advance who will control the source and volume, and check that the controls are easy to reach. According to Yamaha, the Yamaha A-S301 has an adjustable loudness control; Fosi Audio says the Fosi Audio BT20A Pro has bass and treble controls. These features don’t guarantee a particular sound in your room.
According to the Dutch Government, you’re entitled to a product that works properly, and you should contact the seller if there’s a fault. The Netherlands doesn’t have a fixed statutory two-year guarantee period; what you can reasonably expect from a product depends in part on the product and how it’s normally used.
Electrical products sold on the EU market must meet the applicable requirements and carry the required CE marking. Check the actual model, its power adaptor and the product documentation. A general brand or model page doesn’t, by itself, confirm that a particular product on offer complies with the requirements.