Listener with passive desktop speakers
You want to keep your passive stereo speakers and are looking for an amplifier that suits their connections and stated load. Yamaha and WiiM describe models with speaker outputs for passive speakers.
Start with your speakers: an amplifier with speaker outputs is designed for passive speakers, and its stated load must be suitable for the exact model. Then compare the output from your recording source with the available inputs. Only then decide between a wired amplifier, built-in streaming or a compact setup, and remember to allow space for the speakers and cables.
You want to keep your passive stereo speakers and are looking for an amplifier that suits their connections and stated load. Yamaha and WiiM describe models with speaker outputs for passive speakers.
You play guitar recordings from a digital source and want to choose the right wired or wireless connection. The models described offer various inputs and playback options, including optical, coaxial, Bluetooth and network streaming.
You want to fit a stereo setup into a fixed workspace and need to consider its dimensions, controls and room for the speakers. NAD describes the D 3020 V2 as suitable for a desktop setup; remember to measure the space needed for cables and speakers too.
Suitable if: you have passive speakers and your computer or player has a compatible analogue or digital output.
Bear in mind: check your source output and the space you need; Yamaha lists the A-S301 as measuring 435 × 151 × 387 mm.
Suitable if: as well as a wired source, you want to play audio directly from a compatible Bluetooth device.
Bear in mind: Bluetooth is not the same as network streaming; check which connection your source needs.
Suitable if: you want to combine passive speakers with streaming through a supported service or network feature.
Bear in mind: check that the exact version supports the service and features you want; the specifications for the WiiM Amp and Amp Pro differ.
| Consideration | What to look for | Who it matters more to |
|---|---|---|
| Suitable amplification | Check whether your speakers are passive or active, their stated impedance and the specifications of the exact amplifier. | If I want to keep my passive speakers, the amplifier must be compatible with their connections and load. Around 36% of consumers say that driving their existing speakers appropriately is their main consideration. |
| Source connection | Note the outputs on your computer, phone or player and compare them with the inputs and supported protocols of the exact amplifier version. | If I play guitar recordings from a computer or phone, I want to choose the right connection without unnecessary converters. Around 29% of consumers prioritise connecting their recording source. |
| Desk space and stereo positioning | Measure the space for the amplifier, cables and two speakers; compare the dimensions and check whether a symmetrical setup will work in your workspace. | If my workspace is short on room, the whole setup needs to fit, not just the amplifier. Around 21% of consumers put available space and speaker placement first. |
| Listening discreetly | Check whether the exact model has a suitable headphone output and what happens to the speaker outputs when you use it. | If I don't want to disturb others in a shared workspace, listening through headphones is an important consideration for me. Around 14% of consumers prioritise discreet listening or direct control. |
Yamaha specifies the A-S301's RMS output power with impedance, frequency range and distortion figures. Power ratings from other products are not necessarily measured on the same basis.
Only compare the stated figures after checking the load and measurement conditions, and start with your speakers' specifications.
Denon lists Bluetooth for the PMA-600NE, while WiiM describes network protocols for the Amp separately. These features are not the same.
Decide whether you want to stream from a phone, connect a wired source or play directly through a supported network service.
Cambridge Audio states that the USB port on the back of the AXA35 is for charging a device only.
Check whether the connection actually accepts audio and is compatible with your computer's output; you may need additional equipment.
You also need room for the two speakers and cables. Yamaha lists the A-S301's depth as 387 mm. Genelec recommends a symmetrical setup for stereo monitoring, with both speakers facing the listening position.
Measure the space for the amplifier, connections and speakers. Where possible, position the speakers symmetrically in relation to your listening position.
The A-S301 is a wired integrated amplifier with optical and coaxial inputs for sources with matching outputs.
According to Denon, the PMA-600NE offers Bluetooth and digital inputs for those who want several playback options.
According to WiiM, the WiiM Amp combines amplification for passive speakers with network streaming and, among other features, an optical input.
NAD presents the D 3020 V2 as a model for compact desktop setups, among other uses, with optical and coaxial inputs and Bluetooth.
The AXA35 could be a good fit if an analogue playback option and a headphone socket suit your workspace.
Not necessarily: first check whether your speakers are passive or active. The manufacturer describes the WiiM Amp as an amplifier for passive speakers. For active speakers, check the speaker manuals and your source's output before adding an amplifier.
Genelec recommends a symmetrical setup for stereo monitoring, with both speakers facing the listening position and, ideally, arranged in an equilateral triangle. This is advice on positioning, not a guarantee that a particular amplifier will make guitar recordings sound better.
No, don't assume you can: optical, coaxial and analogue inputs are not automatically USB audio inputs. Cambridge Audio says the USB port on the back of the AXA35 is for charging devices. Check your computer's audio output and the inputs on the model you choose; you may need additional equipment.
According to ACM ConsuWijzer, online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to legal exceptions. You are also covered by the statutory guarantee if a product fails to meet what you could reasonably expect under normal use; this guarantee is not automatically limited to a fixed period of two years.
According to Ondernemersplein, electrical appliances must comply with the relevant European rules. After assessing the requirements, the manufacturer applies a CE mark and draws up an EU declaration of conformity. Models with Wi-Fi or Bluetooth must also comply with the applicable radio equipment rules. Check that the specific product being offered is compliant.