Reggae listener with a vinyl collection
You want to play LPs through passive speakers and find out where the phono preamp is. The Consumers’ Association explains that a turntable needs a preamp.
Start with your album source and speakers. A turntable without a built-in phono preamp needs a suitable phono input or a separate preamp, and passive speakers must be connected to speaker outputs. Then choose between wired connections and streaming, and consider bass control and the space available. A higher wattage rating alone won’t tell you how reggae will sound in your home office.
You want to play LPs through passive speakers and find out where the phono preamp is. The Consumers’ Association explains that a turntable needs a preamp.
You play albums through a music service and only want to choose the controls and connections you’ll use. Check that the streaming feature supports your chosen service; WiiM describes the features available on the WiiM Amp.
You listen at a modest volume in a home office and want to work out whether tone controls or an active subwoofer would suit your setup. Yamaha describes the A-S301’s loudness control, while WiiM says the WiiM Amp’s Sub Out is designed for active subwoofers.
First, check the signal path from your album source and whether your speakers are passive. Then compare the bass settings, available space and controls you need in your home office.
| What to consider | What to look for | Who should prioritise it? |
|---|---|---|
| Connecting your album source | Make a note of the output on each source. For vinyl, check whether the turntable or amplifier has a suitable phono preamp; for streaming, check that your preferred service and controls are supported. | If you play albums from vinyl, CD or a music service, you’ll want an amplifier that works with your source. Around 28% of consumers prioritise the connection for their album source. |
| Matching your speakers | Check whether your speakers are passive and refer to the manual for your exact amplifier model to confirm their impedance. | If you already have speakers, you’ll want to know whether they can be connected to the amplifier and whether the electrical match is right. Around 22% of consumers put this first. |
| Bass at low listening volumes | Check the tone or loudness controls and whether any subwoofer output is suitable for an active subwoofer. | If you listen at a modest volume in your home office, you’ll want to assess and adjust the bass at your usual listening level. Around 22% of consumers make bass control their first priority. |
| Space and controls | Measure the space available and check that the controls suit the way you’ll use the amplifier every day. | If desk or shelf space is limited, you’ll want an amplifier that fits and is easy to use. Around 17% of consumers prioritise space and everyday controls. |
| Private listening | Check whether the model has a headphone output and what happens to the speakers when you connect headphones. | If you sometimes want to listen through wired headphones, a suitable connection matters. Around 11% of consumers put private listening ahead of the other considerations. |
A turntable with a phono output doesn’t provide the line-level signal that a standard line input is designed for.
Check whether the required phono preamp is built into the turntable or amplifier, or provided by a separate device.
If nothing in the signal chain provides phono preamplification, you’ll need a separate phono preamp.
Power ratings measured at different impedances or across different frequency ranges aren’t directly comparable.
Compare impedance, frequency range and distortion figures on the same basis, and check your speakers’ specifications.
WiiM specifies that the WiiM Amp’s Sub Out is for active subwoofers.
Check whether your subwoofer is active and whether the connections match.
A passive subwoofer may need an additional amplifier.
The A-S301 is a wired integrated amplifier with digital inputs, loudness control and a subwoofer output.
The PMA-600NE combines MM phono, digital inputs and Bluetooth to support a range of album sources.
The WiiM Amp is a streaming amplifier for passive speakers, with settings for an active subwoofer.
The AXA35 is an analogue amplifier with a phono preamp and headphone output.
The C 316BEE V2 is an analogue option with MM phono, tone controls and a headphone output.
Only if the signal chain includes the required phono preamp. A turntable with a phono output needs a suitable phono input or a separate preamp; a turntable with its built-in preamp switched on can connect to a suitable line input. Also check that the cartridge type is compatible.
Not directly to the WiiM Amp’s Sub Out: WiiM specifies this output for an active subwoofer. A passive subwoofer needs an additional amplifier.
Measure the space available and follow the placement instructions in the manual for your chosen model. On the Cambridge Audio AXA35, automatic standby after 20 minutes of inactivity is enabled by default and can be adjusted, according to the manual.
For many distance purchases made by consumers from a business, you have a 14-day cooling-off period. This doesn’t apply to an online purchase from a private seller. You’re also entitled to a product that meets the required standards. There’s no fixed statutory guarantee period in the Netherlands, and the seller is your point of contact if there’s a problem, according to the Dutch government.
The relevant EU rules apply to products within their respective scopes. The Low Voltage Directive covers electrical equipment within the specified voltage range; models with radio features such as Bluetooth or Wi-Fi are also subject to the relevant rules for radio equipment. The European Commission and EUR-Lex describe these frameworks, but this doesn’t confirm that an individual product complies. Check the product documentation for that.