Start with the output from your music source and the speakers you want to keep: these determine which inputs and speaker connections you need. A suitable phono input is useful for a turntable without its own phono preamp. For standalone network streaming, a streaming amplifier is a better fit, while a traditional amplifier may suit separate players. Check the dimensions, controls and specifications of the exact model, too.
Who is this guide for?
Listener with vinyl and CDs
You want to connect your existing players to passive speakers. Pay particular attention to choosing the right input and checking where the phono preamp is built in. For example, Denon lists an MM phono input for the PMA-600NE.
Listener with a digital blues collection
You want to play music through an app or over your network, and check whether the amplifier can do this on its own. A Bluetooth receiver is not automatically a network streamer; WiiM describes the Amp as a streaming amplifier for network sources.
Listener with a small workspace
You want to keep your passive speakers, but the amplifier also needs to fit on or beside your desk. Compare the stated dimensions with the space you have available, and allow for cables and the controls on your chosen model.
What should you look for when choosing?
Traditional integrated amplifier
Choose this option if: you mainly connect a CD player, turntable or another separate source. Yamaha lists optical and coaxial digital inputs for the A-S301; Denon lists digital inputs and an MM phono input for the PMA-600NE.
Bear in mind: check that the output from your source matches the input on the exact model. Bluetooth or a digital input does not automatically mean you can stream independently over Wi-Fi.
Compact network streaming amplifier
Choose this option if: you have passive speakers and mainly want to play your digital collection through supported apps or network sources. WiiM describes the Amp as a compact amplifier with network streaming.
Bear in mind: according to WiiM, the Amp has no built-in phono input. If your turntable does not have its own preamp, you will need a suitable phono preamp.
Stereo receiver with Bluetooth
Choose this option if: Bluetooth from your phone is enough for you and you also want to connect a turntable. Sony lists Bluetooth reception and a phono input for the STR-DH190.
Bear in mind: Sony specifies a speaker impedance of 6–16 ohms and dimensions of 430 × 133 × 284 mm for this model. Check that these suit your speakers and available space.
| Consideration |
What should you check? |
Who is this important for? |
| Connecting your music source |
Compare the output from your main player with the inputs on the exact model. For vinyl, check where the phono preamp is built in. |
If I mainly play vinyl or CDs, I want to know first whether my player will connect directly. Around 40% of consumers say connecting their music source is their main consideration. |
| Keeping your passive speakers |
Check your speaker specifications and the amplifier’s requirements. Only compare power ratings when the impedance and measurement basis are the same. |
If you want to keep using your existing passive speakers, you’ll want to know whether they’re compatible with the amplifier. Around 30% of consumers put this compatibility first. |
| Standalone streaming |
Check that the model supports your preferred service, source and controls. Bluetooth reception is not the same as network streaming. |
I want to play my digital collection without using a separate streamer, so I check the network features. Around 20% of consumers give standalone streaming top priority. |
| Space and controls |
Measure the available space and allow for cables and the manufacturer’s placement instructions. |
If space is limited at my workstation, I want to know whether the amplifier will fit comfortably and be easy to use. Around 10% of consumers prioritise space and controls. |
Common buying mistakes
-
Confusing Bluetooth with standalone streaming
Receiving Bluetooth from a phone and playing music over a network are two different ways of listening. Sony lists Bluetooth reception for the STR-DH190; WiiM describes network and app playback for the Amp.
Check that the exact model supports your preferred music source and service on its own.
If a model does not support your preferred network source, you may need a separate streamer or have to keep using your phone as the music source.
-
Connecting a turntable to the wrong input
A turntable with a phono output needs a suitable phono preamp, either in the turntable, the amplifier or a separate device. WiiM says that the Amp needs a built-in or separate phono preamp if the turntable does not have one of its own.
Check your turntable’s output before choosing between a phono input and a line input.
If your setup does not include a suitable phono preamp, you will need a separate one.
-
Comparing wattage without checking measurement conditions
Yamaha lists an RMS rating for the A-S301 at 8 ohms, across 20 Hz–20 kHz and at 0.019% THD. Sony gives a rating of 2 × 100 W for the STR-DH190 at 8 ohms, 1 kHz and 1% THD. The measurement conditions differ, so the figures are not directly comparable.
Only compare ratings based on the same impedance and measurement basis, and check your speakers’ requirements.
Relevant brands to consider
Yamaha
Yamaha describes the A-S301 as an integrated amplifier for separate sources, with optical and coaxial digital inputs and adjustable loudness.
- Yamaha specifies an RMS output of 60 W + 60 W at 8 ohms, 20 Hz–20 kHz and 0.019% THD.
- Yamaha gives the dimensions as 435 × 151 × 387 mm. The listed inputs do not automatically make this model a standalone network streamer.
Denon
Denon lists an MM phono input, digital inputs and Bluetooth for use with a range of separate sources on the PMA-600NE.
- These inputs may suit a setup with a compatible turntable and digital sources.
- Bluetooth does not mean the model has built-in Wi-Fi streaming services. Check that the inputs suit your own players.
Sony
Sony describes the STR-DH190 as a stereo receiver with a phono input, Bluetooth reception and A/B speaker outputs.
- Sony specifies a speaker impedance of 6–16 ohms and dimensions of 430 × 133 × 284 mm.
- The 2 × 100 W rating applies at 8 ohms, 1 kHz and 1% THD. Do not compare it directly with an RMS rating across a wider frequency range.
WiiM
WiiM presents the Amp as a compact amplifier for passive speakers with network streaming.
- The manufacturer lists app and network playback for the Amp.
- According to WiiM, the Amp has no built-in phono input. If your turntable does not have its own phono preamp, you will need a suitable separate preamp.
Cambridge Audio
Cambridge Audio describes the AXA35 as an integrated amplifier with a built-in phono preamp and a headphone socket.
- According to the manual, the speaker outputs are muted when you connect headphones.
- Cambridge Audio says the USB port on the back is not intended for adding Bluetooth audio with a Bluetooth adapter. Check the version and included mains lead before buying.
Related products at Joybuy
Related products coming soon.
Frequently asked questions
Can I connect my turntable to any stereo amplifier?
No. Your turntable and amplifier need suitable phono preamplification, which can be built into the turntable, the amplifier or a separate device. WiiM says the Amp needs a built-in or separate preamp if the turntable does not have one of its own; Denon lists an MM phono input for the PMA-600NE. Check the output and cartridge on your own turntable.
How do I check that my speakers and amplifier are compatible?
Compare the impedance and connections of your passive speakers with the manual for the exact amplifier model. Sony specifies a speaker impedance of 6–16 ohms for the STR-DH190. Only compare power ratings when the impedance and measurement conditions match.
What do the cooling-off period and statutory guarantee mean when buying online in the Netherlands?
For many distance sales to consumers by a business, you have a 14-day cooling-off period, according to the Dutch government. The Netherlands also has a statutory guarantee with no fixed legal guarantee period: if a product is faulty, the seller must provide a solution. The Dutch government distinguishes between statutory rights and any manufacturer’s guarantee.
What product regulations apply to an amplifier sold in the Netherlands?
Electrical equipment must comply with the applicable European product regulations. Dutch government information explains that manufacturers of equipment covered by the rules must, among other things, provide a CE mark and an EU Declaration of Conformity. Rules for radio equipment may also apply to Wi-Fi or Bluetooth. A brand name or product listing alone does not confirm that a specific model complies with all applicable requirements.