Who is this for?

Listener with existing speakers

You want to keep your passive speakers, so your first step is to choose an amplifier that the manufacturer says is suitable for their load. This is especially important with models that have specific speaker requirements, such as the Cambridge Audio AXA35.

Rock fan with a vinyl collection

You want to connect a turntable and need to check whether it outputs phono or line level, and where the phono stage sits in the signal chain. Denon lists an MM phono input for the PMA-600NE; WiiM says the WiiM Amp doesn’t have a built-in phono input.

Album streamer in the kitchen-diner

You want to play albums through a supported service without necessarily using a separate network player. So check the streaming features and controls of the exact model: for the WiiM Amp, WiiM lists Spotify Connect, TIDAL Connect and AirPlay 2, among others.

What should you look for?

Choose a model that suits your existing speakers and sources, then check that its connections, streaming features and dimensions work for your space.

What to consider What should you check? Who is this important for?
Existing speakers Check whether your speakers are passive and compare their specifications with the recommendations for the exact amplifier model. Cambridge Audio specifies the AXA35 for 8-ohm speakers and advises against using 4- or 6-ohm speakers. If I want to keep my passive speakers, I need to make sure the manufacturer says the amplifier is suitable for their load. Around 40% of consumers make compatibility their top priority.
Connecting a turntable Check whether the turntable has a phono stage, which output is active, and whether the amplifier has a suitable MM phono or line input. Audio-Technica recommends PHONO for a compatible phono input and LINE for a standard line input. If vinyl is my main source, I want to make sure the turntable’s signal is pre-amplified correctly. Around 30% of consumers prioritise this connection.
Album streaming Check your preferred service, control method and model variant. WiiM lists Spotify Connect, TIDAL Connect and AirPlay 2 for the Amp; the Amp Pro doesn’t automatically have the same features. If I want to play albums directly through a network service, I’m looking for an amplifier that supports my service and preferred controls. Around 20% of consumers make built-in streaming their top priority.
Space and controls Measure the available space and allow for cables and the placement instructions for your chosen model. Yamaha specifies dimensions of 435 × 151 × 387 mm for the A-S301; these measurements alone don’t tell you how much ventilation space it needs. If the amplifier has to go in a fixed spot in my kitchen-diner, I want to know in advance whether it will fit and be easy to use. Around 10% of consumers make placement and controls their top priority.

Common buying mistakes

  • Assuming a high wattage means the amplifier is suitable

    Power figures can be quoted for different loads and under different test conditions. Wattage alone doesn’t tell you whether an amplifier is suitable for your speakers.

    Only compare figures measured on the same basis, and check the recommendations for your speakers and the exact amplifier model. Cambridge Audio warns that using a speaker load not recommended for the AXA35 can cause it to overheat.

  • Confusing a line input with a phono input

    A turntable with a phono output only can’t be connected to every line input without a suitable phono stage.

    Check the turntable’s output and the amplifier’s input as part of the same signal chain. If the turntable doesn’t have a built-in phono stage, you may need a separate one.

  • Treating Bluetooth, network streaming and different model variants as the same

    Bluetooth is a different playback method from a built-in network service. Features can also vary between similar-looking models, such as the WiiM Amp and Amp Pro.

    Check the specifications for the exact version you’re buying to make sure it supports your preferred service and control method.

Brands to consider

Yamaha

The A-S301 is a useful comparison model if you have separate analogue or digital sources and existing passive speakers.

  • Yamaha Netherlands specifies optical and coaxial inputs, and a minimum of 60 W + 60 W RMS at 8 ohms, measured from 20 Hz to 20 kHz.
  • These connections don’t mean it has built-in network streaming. Check that the inputs and speaker requirements suit your setup.

Denon

The PMA-600NE can combine MM phono, digital sources and Bluetooth in one integrated amplifier.

  • Denon lists an MM phono input, Bluetooth and digital inputs.
  • Denon specifies 45 W per channel at 8 ohms and 70 W per channel at 4 ohms. These figures are for different loads, so they aren’t directly comparable; Bluetooth also isn’t the same as built-in network streaming.

WiiM

WiiM describes the WiiM Amp as designed for network playback with passive speakers.

  • For the Amp, WiiM lists Spotify Connect, TIDAL Connect and AirPlay 2, among others.
  • The Amp doesn’t have a built-in phono input. A turntable with a phono output only needs a suitable phono stage. Check the features of the exact variant you’re considering.

Marantz

The PM6007 is designed for suitable MM turntables, among other sources, as well as separate analogue or digital players.

  • Marantz specifies five analogue inputs, one coaxial and two optical inputs, plus 2 × 45 W RMS at 8 ohms across 20 Hz–20 kHz.
  • Check that the connections suit your sources and speakers; a brand’s descriptions of its sound aren’t an independent listening test.

Cambridge Audio

The AXA35 is an analogue-focused option for a suitable turntable and a set of speakers within its specified load range.

  • Cambridge Audio lists a built-in phono stage and 35 W per channel.
  • Cambridge Audio specifies the AXA35 for 8-ohm speakers only and advises against 4- or 6-ohm speakers due to the risk of overheating. According to Cambridge Audio, the USB port isn’t intended for a Bluetooth adaptor.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect my turntable to any stereo amplifier?

No, not directly with every type of output. A turntable with its phono stage switched on can connect to a suitable line input; if it has a phono output only, you’ll need a suitable phono input or an external phono stage. Also check the cartridge and the instructions for both devices.

How do I match speakers and an amplifier?

First check that your speakers are passive, then follow both manufacturers’ connection and load recommendations. Cambridge Audio specifies the AXA35 for 8-ohm speakers only and advises against 4- or 6-ohm speakers due to the risk of overheating.

What should I check if my vinyl sounds distorted?

If your turntable has a PHONO/LINE switch, select PHONO when connecting to a suitable phono input, and LINE when connecting to a standard line input. Audio-Technica warns in its setup advice against using two phono stages at the same time.

What rights do I have after buying online from a Dutch retailer?

For eligible distance purchases from a business, the Dutch government generally provides a 14-day cooling-off period. You’re also covered by the statutory guarantee: if a product is faulty, the retailer is your point of contact. The Netherlands doesn’t have a fixed statutory two-year guarantee period for every product.

What rules apply to electrical equipment and my old amplifier?

According to EU information, CE marking is required only for product groups covered by harmonised EU rules; the mark is a declaration by the manufacturer, not an independent quality mark. For an old, similar household appliance, the Dutch government describes a take-back scheme when you buy a new appliance, where that scheme applies.