Who is this choice relevant to?

Listener with passive speakers

You want to use your existing speakers in your hobby room, so first check whether the amplifier is compatible with their specifications.

Music streamer

You choose music on your phone or through a streaming service and want to know whether Bluetooth is enough, or built-in network streaming better suits the way you listen.

Listener with existing sources

You want to connect a CD player, TV or record player, for example, and need an amplifier with the right input.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Speakers and amplification Check whether your speakers are active or passive. For passive speakers, compare the permitted impedance and power ratings under the same test conditions. I want to keep using my passive speakers and first check whether the amplifier is compatible. Around 40% of consumers put speaker compatibility first.
Direct streaming Check that the model supports your music service and preferred way to play music; Bluetooth and network streaming are not the same. I want to start playing music directly from a supported app or service. Around 30% of consumers prioritise this direct streaming option.
Source connections Compare the outputs on your TV, CD player or record player with the amplifier’s inputs. An MM phono input is designed for a compatible record player setup. I want to connect my existing TV, CD player or compatible record player without choosing the wrong input. Around 20% of consumers prioritise these wired sources.
Positioning and controls Measure the space available and allow room for the connections. Decide whether you want physical controls, a remote control or app control. I want the amplifier to fit in the space available and be easy to use while I’m enjoying my hobby. Around 10% of consumers prioritise positioning and controls.

Common buying mistakes

  • Buying an amplifier without checking the speaker type

    Active speakers have built-in amplification, so a separate stereo amplifier may not be necessary. A model such as the WiiM Amp is designed to drive passive speakers.

    First check whether your speakers are active or passive, and which inputs they have.

  • Comparing wattage figures without checking the test conditions

    A power rating cannot necessarily be compared directly with that of another model. Yamaha and Denon quote their figures at specific impedances and under specific test conditions.

    Only compare power per channel when the impedance and test conditions match, and check your speakers’ specifications.

  • Assuming Bluetooth, digital inputs and network streaming are the same

    These are different ways to play music. A digital input or Bluetooth connection does not automatically mean you can stream directly from a network service.

    Make a note of your main music source and check that the exact model has the right input, service or protocol for it.

Brands to consider

Yamaha

Yamaha describes the A-S301 as an integrated amplifier for passive speakers, with optical and coaxial inputs among its connections.

  • Yamaha specifies the A-S301 at 2 × 60 W RMS at 8 Ω, measured from 20 Hz to 20 kHz at 0.019% THD.
  • Optical and coaxial inputs do not indicate built-in network streaming. Check which separate playback option you need.

Denon

Denon says the PMA-600NE combines Bluetooth, digital inputs and an MM phono input.

  • The Denon manual specifies 45 W per channel at 8 Ω, with two channels driven and a measurement range of 20 Hz to 20 kHz.
  • Bluetooth is not the same as built-in network streaming. Only compare power ratings with models tested under the same conditions.

WiiM

WiiM describes the WiiM Amp as a streaming amplifier for passive speakers, with HDMI ARC among its connections.

  • WiiM lists streaming protocols and 60 W per channel at 8 Ω.
  • For TV sound through this model, WiiM specifies an ARC or eARC connection and stereo PCM output. Also check that your music service is supported.

Cambridge Audio

Cambridge Audio says the AXA35 has analogue connections and a built-in MM phono preamplifier.

  • Cambridge Audio specifies 35 W at 8 Ω, a headphone socket and a remote control.
  • A source without a suitable analogue output may require additional equipment. Check the connections on both the source and the amplifier.

Marantz

Marantz says the MODEL 40n combines HEOS streaming and HDMI ARC in an integrated stereo amplifier.

  • Marantz’s Dutch product information lists 70 W, HEOS and HDMI ARC for the MODEL 40n.
  • Check that your specific music source and service work with your preferred connection and streaming setup.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a separate stereo amplifier for active speakers?

Not necessarily: active speakers have built-in amplification. Check that their input and volume controls are suitable for your music source.

How can you check whether an amplifier is compatible with your speakers?

Check the manuals for the exact speakers and amplifier to confirm the permitted impedance and connection method. For example, Denon specifies speaker outputs for 4–16 Ω for the PMA-600NE; that range does not automatically apply to other models.

Why is there no TV sound from a WiiM Amp via HDMI ARC?

For this model, WiiM specifies that the TV must be connected to the ARC or eARC socket and the digital audio output set to stereo PCM. Check these settings if you’re using this connection.

What rights do I have when I buy an amplifier online?

According to ACM ConsuWijzer, online purchases usually come with a statutory cooling-off period of up to 14 days after delivery, although exceptions apply. You are also entitled to a product that does what you could reasonably expect under normal use; this does not automatically mean a fixed two-year warranty period.

Can I play music as loudly as I like in my hobby room?

Don’t assume you can play music at any volume. The Government of the Netherlands advises people dealing with noise from neighbours to agree arrangements first, such as what time music can be played; this guidance does not set a universal permitted volume.