Who is this buying guide for?

Listeners with existing passive speakers

You want to check that an amplifier will work with your current speakers and setup before comparing extra features. Yamaha and WiiM describe amplifiers designed for passive speakers.

Listeners in a quiet living room

You often listen at modest volume and want to adjust the sound to suit your preferences and your room. Yamaha describes the A-S301 as having an adjustable loudness control.

Streamers and vinyl listeners

Your music source determines which connections and features you need, such as Bluetooth, network streaming or a suitable phono input. Denon, WiiM and Yamaha describe different combinations of these features.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Compatible speakers Check whether your speakers are passive, their impedance and the speaker load supported by the amplifier. If I want to keep using my existing passive speakers, I need to make sure the amplifier is compatible with them. Around 33% of consumers put speaker matching first.
Low-volume listening and placement Look at the loudness or tone controls available, the dimensions, and the space needed for cables and ventilation. If I usually listen at modest volume in a small room, I want to consider the controls and where the amplifier will sit on my furniture. Around 27% of consumers prioritise low-volume listening and placement.
Direct streaming Check whether each model supports the music service and connection method you want; Bluetooth is not the same as network streaming. If I want to play music directly from supported apps without a separate streamer, I’ll look for built-in network features. Around 20% of consumers give streaming top priority.
Connecting a turntable Check whether the turntable itself has a phono pre-amplifier and whether the amplifier has a suitable phono input for the cartridge you use. If I want to listen to vinyl, my turntable’s signal needs to be compatible with the amplifier input. For around 20% of consumers, a suitable vinyl connection is the top priority.

Common buying mistakes

  • Comparing wattage without checking the test conditions

    For the A-S301, Yamaha specifies a minimum of 60 W + 60 W RMS at 8 ohms, 20 Hz–20 kHz and 0.019% THD. For the A-S201, Yamaha lists 100 W + 100 W at 8 ohms, 40 Hz–20 kHz and 0.2% THD. These figures are given under different conditions and do not prove that one amplifier will sound different during normal living-room listening.

    Read the full power specification, including impedance and test conditions, and start with your speakers’ requirements.

  • Mistaking a line input for a phono input

    According to WiiM, the WiiM Amp does not have a built-in phono input. A turntable without its own phono pre-amplifier therefore cannot simply be connected to a standard line input.

    First check whether your turntable has a built-in phono pre-amplifier and whether the amplifier has a suitable phono input.

    A turntable without its own phono pre-amplifier may need a separate phono pre-amplifier.

  • Confusing Bluetooth with network streaming

    Denon lists Bluetooth for the PMA-600NE; WiiM describes the Amp as offering network and streaming features too. These connection options are not the same.

    Choose based on the playback method and music services you actually use.

Brands to consider

Yamaha

The A-S201 offers an analogue setup with MM phono; according to Yamaha, the A-S301 adds optical and coaxial inputs, plus adjustable loudness.

  • For the A-S301, Yamaha specifies a minimum of 60 W + 60 W RMS at 8 ohms, 20 Hz–20 kHz and 0.019% THD.
  • The A-S201’s power rating was measured under different conditions. Power figures alone do not show which amplifier is better suited to folk music.

Denon

According to Denon, the PMA-600NE combines Bluetooth, digital inputs and MM phono.

  • Denon specifies 45 W per channel at 8 ohms.
  • Bluetooth is not built-in network streaming. Also check that the connections suit your speakers and other sources.

Marantz

According to Marantz, the PM6007 combines analogue inputs, MM phono and digital inputs.

  • Marantz specifies 2 × 45 W at 8 ohms RMS, 20 Hz–20 kHz, plus two optical inputs and one coaxial input.
  • The product specifications do not list Bluetooth or built-in network streaming.

WiiM

The WiiM Amp is an integrated network streaming amplifier for passive speakers.

  • WiiM lists support for services including Spotify Connect and TIDAL Connect, as well as HDMI ARC.
  • WiiM does not list a phono input for the Amp. A turntable without its own phono pre-amplifier will need a separate phono pre-amplifier.

Cambridge Audio

According to Cambridge Audio, the AXA35 is an analogue amplifier with a built-in MM phono stage.

  • Cambridge Audio specifies 35 W per channel and an MM phono stage.
  • Cambridge Audio’s support information does not list a subwoofer output or pre-amplifier output for the AXA35.

Related products

Related products coming soon.

Frequently asked questions

Do I need a separate phono pre-amplifier for my turntable?

Only if your turntable does not have a suitable built-in phono pre-amplifier and the amplifier does not have a compatible phono input. For the WiiM Amp, WiiM requires an external phono pre-amplifier when using a turntable without a built-in pre-amplifier; Yamaha specifies an MM phono input for the A-S201.

Can I connect a TV to any digital input?

Check the connections and audio settings on both your TV and amplifier. Yamaha describes the A-S301’s optical input as suitable for TV audio; WiiM lists HDMI ARC for the Amp and recommends setting the TV to Stereo PCM.

What should I do if my amplifier is smoking or smells unusual?

Switch off the amplifier, unplug it from the mains and have it checked. This is Yamaha’s safety advice for the A-S301 family, not a general diagnosis of the cause.

What warranty and cancellation period apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, when used normally, you are entitled to a product that does what you could reasonably expect; if a product is faulty, the seller must put this right under the applicable terms. For an online product purchase, the statutory cancellation period is generally 14 days after delivery, with some exceptions. These statutory rights are separate from a manufacturer’s warranty for a specific model.

Is CE marking relevant for an electrical amplifier sold in the Netherlands?

Yes. The Dutch Government states that electrical appliances on the EU market must have the required CE marking. Check the marking and product information for the specific item before you buy.