TV and film enthusiast
Wants to listen to soundtracks from a TV or connected player through two speakers. So check the audio output, connection and audio setting required by the model you choose.
Choose based on the output on your TV, computer or player: HDMI ARC may suit a TV with ARC, while an optical input may be right for a source with an optical output. Then check that the amplifier is compatible with your speakers and fits the space you have available. Also check which audio formats and settings the exact model supports.
Wants to listen to soundtracks from a TV or connected player through two speakers. So check the audio output, connection and audio setting required by the model you choose.
Listens to film music as albums or playlists and wants a streaming method and controls that suit their music source. Check which services and apps each model supports.
Wants to keep using their existing passive speakers. Compare the speakers’ specifications with those of the amplifier, and allow for the space taken up by the unit and cables.
Start with the source of your soundtrack, then check your speakers and available space. The right connection will depend on your setup.
A good fit if: you stream soundtracks, use passive speakers and have limited space.
Bear in mind: check the services, controls and inputs. WiiM specifies stereo PCM for TV sound through the Amp.
A good fit if: you already have a suitable playback source and, for example, want to connect your TV’s optical audio output.
Bear in mind: the Yamaha A-S301 has optical and coaxial inputs, but no built-in network streaming or HDMI ARC. Measure the space for its 435 × 151 × 387 mm casing.
A good fit if: you want to connect several HDMI sources as well as a TV.
Bear in mind: the Denon DRA-900H and Marantz STEREO 70s are stereo systems with HDMI; they are not full multi-channel surround sound setups.
A good fit if: you want to combine passive speakers with Sonos controls and, potentially, TV sound.
Bear in mind: Sonos specifies an optical audio adapter for TVs without HDMI ARC. When used for TV surround sound, the line input and SUB output are disabled.
| What to consider | What should you check? | Who is this most relevant to? |
|---|---|---|
| Connection and audio format | Check your source’s output, the matching input and the audio format the model accepts. | I want to play sound from my TV or player without connection surprises; this applies to around 33% of consumers who prioritise the connection to their film source. |
| Streaming and controls | Check that the service and playback method you want are compatible with the model. | I want to start and control soundtrack albums or playlists in the way I’m used to; around 27% of consumers prioritise streaming and controls. |
| Existing speakers | Check whether your speakers are passive or active, and compare their specifications with those of the amplifier. | I want to keep using my current speakers and make sure they’re compatible; this applies to around 20% of consumers who prioritise speaker compatibility. |
| Placement and controls | Measure the space, allowing room for cables, and check that the controls suit the way you use the amplifier. | I want the amplifier to fit practically on or around my workspace; around 20% of consumers prioritise placement and controls. |
The Marantz PM7000N manual warns that non-PCM signals such as Dolby Digital, DTS and AAC may cause noise through the digital input and damage the speakers. This limitation applies to this model; don’t assume it also applies to other amplifiers.
Check which audio formats the exact model accepts and set your source accordingly before playing anything.
Power ratings may be given for different impedances and under different testing conditions. A wattage figure alone doesn’t confirm that an amplifier is suitable for your speakers.
Compare the power specifications and the conditions under which they were measured. Also check the specifications of both your speakers and the amplifier.
To play TV sound through the Sonos Amp, you need an HDMI ARC port; a standard HDMI port won’t necessarily work for this.
Check the label next to the TV port and the installation instructions for the model you choose.
If your TV doesn’t have HDMI ARC, Sonos specifies an optical audio adapter for the Amp.
The A-S301 and MusicCast WXA-50 offer different connection and placement options.
The PMA-900HNE combines digital audio inputs with HEOS, while the DRA-900H also offers HDMI connections for video sources.
The STEREO 70s is designed for stereo with HDMI sources, ARC and HEOS.
According to the manufacturer, the WiiM Amp combines amplification for passive speakers, streaming and HDMI ARC.
The Amp is designed for passive speakers in a Sonos setup and, according to Sonos, can connect to a TV via HDMI ARC.
Only if HDMI ARC suits your source and setup. WiiM says to connect the Amp to a TV’s ARC or eARC port and set the TV’s audio output to stereo PCM. The Yamaha A-S301 has an optical input, among other connections. Check which outputs your TV or player has and what the exact amplifier model supports.
Before playing anything, check which audio formats the model you’ve chosen accepts. The Marantz PM7000N manual warns that non-PCM signals such as Dolby Digital, DTS and AAC may cause noise through the digital input and damage speakers. Don’t apply this model-specific instruction to other amplifiers without checking first.
Sonos says you’ll need an optical audio adapter to connect the Amp to your TV in that case. Before buying, check which audio output your TV actually has.
According to the Dutch government, when you buy remotely from a business, you’re entitled to a 14-day cooling-off period in many cases. The seller must provide information about, among other things, the product and the cooling-off period; check the terms of the specific purchase.
According to the Dutch government, when you buy as a consumer, you’re entitled to a product that works properly, and you should generally contact the seller if there’s a fault. The Netherlands has no fixed statutory guarantee period that applies to all products; a manufacturer’s guarantee is in addition to your statutory rights.