Who is this choice relevant to?

Listener with passive bookshelf speakers

You want to keep using your left and right speakers. Check the documentation to see which amplifier load and connections are supported. WiiM’s installation guide explains how to connect passive speakers.

Computer or streaming listener

You play recordings from a computer or music service. The available output, support for your preferred service and the way you want to control playback will determine whether you need an analogue or digital input, or network streaming.

Desk listener who sometimes uses headphones

You may switch between stereo speakers and headphones. Check the connections and features of the specific model. Cambridge Audio lists a headphone socket for the AXA35 and explains how the speaker outputs behave when headphones are connected.

What should you look for when choosing?

First, check that the amplifier is compatible with your speakers. Then decide how to connect your quartet recordings, and finally make sure your workspace has room for the equipment and allows for practical stereo speaker placement.

What to consider What should you check? Who should prioritise this?
Speakers and amplifier Check whether your speakers are active or passive. For passive models, compare the supported load and connections in both manuals. If I want to keep my existing passive speakers, I first check that the amplifier and speakers are compatible; around 33% of consumers give speaker compatibility top priority.
Connecting your recordings Check which audio output your computer or player has, and whether the exact amplifier model supports the corresponding input or streaming service you want. If my quartet recordings come from a computer or music service, I want to know how I can actually play them; around 25% of consumers put the music source first.
Stereo placement at your desk Plan where to place both speakers and measure whether the amplifier will fit in the available space. Genelec highlights the importance of similar placement and reflections on the left and right for an accurate stereo image. If I listen to two speakers at my desk, I want to be able to place them either side of my listening position; around 25% of consumers make stereo placement their top priority when choosing.
Headphones Check whether the model has a headphone socket, and what headphone impedance and speaker output behaviour are specified in the manual. If I sometimes want to listen without disturbing anyone while I work, I look for an amplifier that makes it easy to switch to wired headphones; around 17% of consumers prioritise private listening.

Common buying mistakes

  • Buying an amplifier for passive speakers when you have an active desktop setup

    An active speaker already has its own amplification. The passive speaker connections described in WiiM’s installation guide are not designed to act as a standard line input for an active speaker.

    Look up the exact speaker model and check whether the speakers are active or passive before choosing an amplifier.

    Choosing the wrong signal path may mean you need additional equipment to connect your source and speakers.

  • Confusing an input with direct access to a music service

    An optical input or Bluetooth connection does not automatically mean that your preferred music service will work directly through the amplifier. Denon describes Bluetooth for the PMA-600NE, while WiiM describes network streaming for the Amp Pro.

    Compare your source’s output and your preferred controls with the features of the exact amplifier model.

    Depending on your source and chosen connection, you may need a separate streamer, converter or extra cable.

  • Looking only at wattage and forgetting about your desk setup

    Power ratings are only meaningfully comparable when the impedance and measurement conditions also match. The stereo image also depends in part on speaker placement and reflections in the room, as Genelec explains.

    Compare power ratings using the same measurement basis, and plan where both speakers will go before choosing a model.

Brands to consider

Yamaha

The A-S301 is an integrated amplifier for separate sources, connected via suitable analogue or digital inputs.

  • Yamaha lists optical and coaxial inputs, a subwoofer output, and 60 W + 60 W minimum RMS at 8 ohms over 20 Hz–20 kHz.
  • Measure your available space in advance. These connections alone do not indicate built-in network streaming.

WiiM

WiiM says the Amp Pro combines amplification for passive speakers with network streaming and connections for other sources.

  • The manufacturer describes streaming features and setup via an app and network.
  • Check that your music service and preferred controls are supported. The Vibelink Amp is a different model and should not be confused with the streaming Amp Pro.

Denon

According to Denon, the PMA-600NE combines Bluetooth, digital inputs and an MM phono input for a range of separate sources.

  • Denon lists 45 W per channel at 8 ohms for this model.
  • Bluetooth is not the same as built-in network streaming, so check which source and controls you need.

Cambridge Audio

The AXA35 is worth considering if you want a headphone socket and analogue connections near your workspace.

  • The manual recommends headphones rated at 32–600 ohms and explains that the speaker outputs are muted automatically when headphones are connected.
  • Check that the connections suit your music source and headphones.

Marantz

The PM6007 is an integrated amplifier for separate analogue and digital sources, including, according to the European product specifications, an MM turntable.

  • Marantz lists 2 × 45 W RMS at 8 ohms over 20 Hz–20 kHz, two optical inputs and one coaxial input.
  • The manual specifies two-channel PCM for the digital inputs. The specifications do not prove a sound benefit in any particular room.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need a stereo amplifier if your desktop speakers are active?

Not to amplify active speakers: first check their inputs and the output on your music source. WiiM’s installation guide describes speaker outputs for a pair of passive speakers.

How do you connect a computer without assuming it has a USB audio input?

Check which audio output your computer has and which input the exact amplifier model supports. WiiM lists Line In and Optical In, among other inputs, for the Amp Pro; Yamaha specifies optical and coaxial inputs for the A-S301. Depending on your equipment, you may need a suitable cable or an external converter.

What can you change about speaker placement?

Check that both speakers are at a similar height and have roughly similar distances and reflections on either side of your listening position. Genelec highlights this as a consideration for an accurate stereo image; speaker placement cannot guarantee a particular result for every recording or room.

What safety rules apply to an amplifier sold in the Netherlands?

Applicable European safety and conformity rules apply to electrical and electronic equipment. Ondernemersplein explains the manufacturer’s responsibility for CE marking and an EU declaration of conformity; models with Bluetooth or Wi-Fi must also comply with the relevant rules for radio equipment. A model declaration alone does not establish that a specific item on offer meets all the requirements.

Do you have a cooling-off period when buying online?

In principle, a qualifying distance purchase from a business comes with a 14-day cooling-off period. The Dutch Government lists exceptions and situations that do not count as distance purchases, so check which terms apply to your specific purchase.