Who is this choice relevant to?

Listeners with existing passive speakers

If you want to keep using your current stereo system, start by checking your speakers’ impedance and sensitivity, then check the amplifier’s requirements. Speaker placement and your listening position matter too; Genelec explains how placement can affect how audible room resonances are.

Streamers with a challenging living room

If you stream country music over a network service, network features and room correction may be useful. Yamaha lists YPAO for the R-N800A, while WiiM lists room correction for the Amp Pro. These features are no substitute for suitable speakers or careful placement.

Country record collectors

If you use a turntable, check that its cartridge is compatible with the amplifier’s phono input. Yamaha lists an MM phono input for the A-S201; Denon specifies MM and MC phono for the PMA-900HNE.

What should you look for?

Check your speakers and listening position first. Then decide whether you need extra features for streaming, vinyl or room correction.

What to consider What to look for when buying Who should prioritise this?
Speaker compatibility Check the impedance of your passive speakers and compare power ratings only when the impedance and test conditions are the same. If I want to keep my existing speakers, I need to know whether the amplifier is compatible before comparing wattage figures. Around 36% of consumers put speaker compatibility first.
Room and listening position First consider where your speakers and usual listening position can go; then decide whether you want to use room correction. If the room or listening position is my main concern, I want to assess the setup first and choose extra features afterwards. Around 29% of consumers prioritise this.
Network streaming Check that the built-in network features work with the music service and controls you want to use. If I want to stream country music directly from a network service, I look for built-in streaming and the connections I need. Around 21% of consumers put streaming first.
Phono for vinyl Check that your turntable’s cartridge type matches the MM or MC phono input. If you mainly want to play records, you’ll want to know whether the amplifier is compatible with your cartridge and whether you need a separate phono preamp. Around 14% of consumers prioritise vinyl.

Pitfalls to avoid

  • Comparing wattage without checking the test conditions

    A power rating measured at a different impedance, frequency range or distortion level is not directly comparable with another wattage figure.

    Make a note of each model’s full power rating and assess it alongside your speaker specifications.

  • Buying an amplifier to fix a placement problem

    Speaker and listening-position placement still matter, even if the amplifier has room correction. Genelec explains how placement can affect how audible room resonances are.

    First consider the possible speaker positions, then decide whether you want to use a calibration feature.

  • Assuming every streaming amplifier supports the same sources

    Models differ in their phono and TV connections. WiiM states that TV audio via the Amp Pro requires stereo PCM or Dolby Digital; DTS and Dolby Atmos are not supported through this connection.

    Check your streaming service, turntable and any TV connection separately. If the right input is missing, you may need a separate source or phono preamp.

Relevant brands to consider

These models offer different features; their suitability depends on your speakers, sources and setup.

Yamaha

The R-N800A combines network features with YPAO, while the A-S201 is a simpler integrated amplifier with MM phono.

  • Yamaha specifies 2 × 100 W at 8 ohms for the R-N800A, measured across 20 Hz–20 kHz at 0.07% THD.
  • Yamaha states that the R-N800A does not have HDMI ARC. For the A-S201, Yamaha lists an MM phono input; built-in network streaming is not a specified feature for this model.
  • The A-S201 has a different test specification: 2 × 100 W at 8 ohms, 40 Hz–20 kHz and 0.2% THD. Don’t compare these figures as if the test conditions were the same.

Denon

The PMA-900HNE is an integrated amplifier with HEOS streaming, digital inputs and MM/MC phono.

  • Denon specifies 50 W per channel at 8 ohms and 85 W per channel at 4 ohms.
  • Assess the power rating at the impedance of your own speakers; the two figures listed are not directly comparable with each other.

WiiM

The Amp Pro is a compact streaming amplifier for passive speakers, with HDMI ARC and room correction.

  • WiiM specifies 60 W per channel at 8 ohms and 120 W per channel at 4 ohms.
  • According to WiiM, using a TV via the ARC connection requires stereo PCM or Dolby Digital; DTS and Dolby Atmos are not supported.
  • Check compatibility with your speakers and your TV’s audio output; the listed features alone do not prove that it is suitable for your room.

Marantz

The MODEL M1 combines HEOS streaming, HDMI eARC and a subwoofer output, making it a stereo system that can also play TV audio.

  • Marantz specifies 100 W per channel for the MODEL M1.
  • Check the test conditions when comparing this power rating with other models. A manufacturer’s description of spacious sound does not determine the results you’ll get in your living room.

Joybuy products

Related products coming soon.

Frequently asked questions

Is more watts per channel automatically better for country music in a large living room?

No. A higher wattage figure does not automatically make an amplifier more suitable. First consider your speakers and the listening level you want, and check the impedance and test conditions for every figure. Yamaha specifies 2 × 100 W at 8 ohms for both the R-N800A and A-S201, but under different frequency and distortion conditions.

What can you do with your setup before using room correction?

First, consider the placement of your speakers and your usual listening position. Genelec explains how speaker placement can affect how audible room resonances are; following this advice does not guarantee the same results in every living room.

Which connections should you check for streaming, vinyl and TV audio?

Check that the amplifier has the right feature and connection for each source. For vinyl, the cartridge type must match the phono input; for streaming, the built-in network features should suit the way you use them. WiiM specifies stereo PCM or Dolby Digital for TV audio via the Amp Pro, not DTS or Dolby Atmos.

Can you play music as loudly as your amplifier allows at home?

An amplifier’s technical capacity does not determine what your neighbours will find acceptable. The Dutch government advises discussing arrangements with your neighbours first, for example about playing music. Its national guidance does not set a standard volume level or finishing time for every home.