Listeners with existing passive speakers
You want to know whether a new amplifier will suit your current speakers, listening distance and the dynamics of choral recordings. QSC emphasises that power alone is not a measure of sound pressure.
Start by choosing an amplifier that matches the impedance of your passive speakers, then compare its power output under the same measurement conditions. Also consider speaker sensitivity and listening distance: a higher wattage alone won’t tell you how choral recordings will sound in your living room. Then choose the inputs or network features that suit your source.
You want to know whether a new amplifier will suit your current speakers, listening distance and the dynamics of choral recordings. QSC emphasises that power alone is not a measure of sound pressure.
You use a digital source or streaming service and want to find out whether a suitable digital input will do, or whether built-in network streaming would better suit the way you listen.
You already have a playback source and are looking for a stereo amplifier with the right connections, without making network features a priority.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Speaker compatibility | Check the impedance of your speakers and the loads permitted by the amplifier’s manual. Compare power ratings only at the same impedance and under the same measurement conditions. | I want to keep using my existing passive speakers and first check that they’re compatible. For around 36% of consumers, matching the speakers is the top priority. |
| Listening distance and dynamics | Check the speakers’ sensitivity, the distance to your listening position and the rated power on a comparable measurement basis. Wattage alone won’t predict how the sound will be reproduced. | If my listening position is further from the speakers, I want to be able to assess both quiet and loud passages properly. Around 29% of consumers give listening distance and dynamics the highest priority. |
| Source connection | Check the outputs on your CD player, TV, computer or streamer, then compare them with the inputs on the exact amplifier model. For network streaming, also check whether it supports the service you want to use. | I want to play my digital recordings or use my streaming service without unnecessary extra equipment. For around 21% of consumers, choosing a digital source is the most important consideration. |
| A straightforward setup | Make a list of the sources you currently connect and check that their outputs are compatible. Consider extra network or TV features in terms of what you’ll actually use. | I want to connect my existing source without paying for features I don’t need. Around 14% of consumers prioritise a straightforward setup with their existing sources. |
A power rating at 4 ohms isn’t measured in the same way as one at 8 ohms. So comparing wattage alone can give you the wrong impression of how well an amplifier will work with your speakers.
Compare power per channel at the same impedance and under the stated measurement conditions. Also check your speaker specifications and the amplifier’s manual.
A digital output, analogue output and network source won’t necessarily need the same input or equipment. The models reviewed differ in their connections and built-in network streaming.
Check your source’s output first, then choose a suitable input or network feature. If you want to stream later and the amplifier doesn’t have built-in network streaming, you may need a separate streamer.
A separate streamer also means adding another device to your setup.
With some combinations, the load on the amplifier may become too low. Cambridge Audio specifically warns against connecting two pairs of 4 or 6 ohm speakers to the CXA81 and CXA81 Mk II.
Before switching on both pairs at once, check the manual for the exact combination of amplifier and speakers.
The integrated A-S501 and A-S701 are worth comparing if you want to connect existing sources and compare power ratings on the same measurement basis.
The CXA81 Mk II is an integrated amplifier to consider if you want to connect digital sources, Bluetooth or a balanced XLR source, among other options.
The PMA-900HNE is an example of a stereo amplifier with HEOS network streaming alongside digital and analogue sources.
The MODEL 50 is worth considering if you mainly want to use existing stereo sources and may also connect an MM turntable.
According to Rega, the Elex MK4 combines analogue inputs with optical and coaxial digital inputs, as well as an MM phono input.
Not before checking the amplifier’s manual and the specifications of both pairs of speakers. Cambridge Audio specifically warns against connecting two pairs of 4 or 6 ohm speakers to the CXA81 and CXA81 Mk II at the same time, as this lowers the effective load.
That depends on the streamer’s output and the amplifier’s inputs. Yamaha lists optical and coaxial digital inputs for the A-S501; Denon lists HEOS network streaming for the PMA-900HNE. Check that the output, input and service you want to use are compatible with your devices.
According to the Dutch government, a 14-day cooling-off period applies to many qualifying distance purchases. Before buying, check the seller’s information about your specific purchase and the returns process; don’t assume you’ll be able to try it at home without limits.
According to ACM ConsuWijzer, you have a statutory guarantee in addition to any manufacturer’s or seller’s guarantee. If the product doesn’t meet what you could reasonably expect during normal use, the seller must provide an appropriate solution at no cost. This right isn’t automatically limited to the commercial warranty period.
According to the Dutch government, electrical products covered by the relevant EU safety rules must have a CE marking. The European Commission describes the Low Voltage Directive as applying to equipment within the stated voltage limits. Check the information and marking on the specific product; a CE marking doesn’t tell you whether the amplifier is compatible with your speakers.