Who is this buying guide for?

Listeners with existing passive speakers

You want to keep using your current speakers, so you’re looking at their specifications and the speaker load the amplifier can handle. The manuals from Marantz, Yamaha and WiiM provide information specific to each model.

Chamber music listeners who prefer lower volumes

You often listen quietly and want to judge for yourself whether a loudness or tone control suits your speakers and room. Yamaha lists adjustable loudness for the A-S301, while Cambridge Audio mentions tone controls for the AXA35.

Listeners with multiple music sources

Your choice depends on the outputs of your devices, such as a CD player, turntable or digital device, as well as any streaming services you use. The product specifications from Marantz, Denon, Cambridge Audio and WiiM describe different connections and features.

What should you look for when choosing?

Start with the speakers and sources you already own. Then consider which controls and extra features you really need in your living room.

What to consider What to look for Who is this important for?
Speaker compatibility Check whether you have passive or active speakers, their impedance, and the load the amplifier can handle, as stated in its manual. If I want to keep using my passive speakers, I need to know whether they’re compatible with the amplifier, rather than looking only at the wattage. Around 33% of consumers put speaker compatibility first.
Listening at low volume Check whether loudness or tone controls are available and can be adjusted separately. If you often listen to chamber music quietly, you may want to try whether an adjustable tonal balance sounds good in your room. Around 27% of consumers prioritise these controls.
Connections for your sources Make a note of your devices’ outputs. For a turntable, check the cartridge and whether phono pre-amplification is needed. If I want to connect my CD player, turntable or digital source, the inputs need to match the equipment I already own. Connections are the top priority for around 20% of consumers.
Compact streaming Check which streaming services you want, how you’ll control them, the network connections, dimensions and speaker type. If you’re short on space and want network playback built into your amplifier, compare the services and controls beforehand. Around 20% of consumers prioritise this compact streaming set-up.

Common buying mistakes

  • Focusing only on the wattage

    Manufacturers state power output under specific impedance and measurement conditions. The figure alone doesn’t predict how an amplifier will work with your speakers.

    Compare the power rating and the associated measurement conditions, and check the speaker specifications in the manual for the exact amplifier version.

  • Confusing Bluetooth with network streaming

    Bluetooth is different from built-in network playback. The Denon PMA-600NE lists Bluetooth, while WiiM describes network and streaming features for the Amp Pro.

    Decide in advance whether you want to play music via Bluetooth from a compatible device or use the network services of a streaming amplifier.

    If you want to use network services with an amplifier that doesn’t support them, you may need a separate streamer.

  • Not checking the input for a turntable or digital source

    An MM phono input is not the same as a standard analogue line input. The models covered here don’t all have the same inputs, either.

    Write down the outputs of your sources and compare them with the connections on the exact amplifier version.

    Depending on your existing equipment, you may need a separate phono pre-amplifier or digital-to-analogue converter.

Brands worth considering

Marantz

The PM6007 is an integrated stereo amplifier for wired analogue and digital sources.

  • For the PM6007, Marantz lists 2 × 45 W RMS at 8 ohms over 20 Hz–20 kHz, an MM phono input, two optical inputs and one coaxial input.
  • According to the product specifications, this model doesn’t have built-in Bluetooth or network streaming. Marantz’s description of its sound is a manufacturer claim, not an independent listening test.

Yamaha

The A-S301 combines wired analogue and digital sources with adjustable loudness.

  • Yamaha specifies 2 × 60 W RMS at 8 ohms and lists optical and coaxial inputs. You can judge the adjustable loudness for yourself when listening quietly.
  • The loudness control doesn’t prove that chamber music will sound better in a particular room. Also check the space available for positioning and the ventilation required.

Denon

The PMA-600NE is worth considering if you want Bluetooth alongside digital inputs and MM phono.

  • For this model, Denon lists Bluetooth, digital inputs, a phono equaliser and 45 W per channel at 8 ohms.
  • Bluetooth is not the same as built-in network streaming. Denon’s statements about sound are manufacturer claims.

Cambridge Audio

The AXA35 is an integrated amplifier for a mainly analogue set-up with a compatible turntable.

  • For the AXA35, Cambridge Audio lists analogue inputs, MM phono, tone controls and 35 W at 8 ohms.
  • You’ll need a separate solution for a source without an analogue output. If you’re buying in the Netherlands, check the exact EU version and the supplied mains lead.

WiiM

WiiM describes the Amp Pro as a compact streaming amplifier for passive speakers, with HDMI ARC and app control.

  • WiiM specifies 60 W per channel at 8 ohms and built-in network features.
  • Check that it supports the services you want and the TV audio formats you need, and confirm which version is being offered. Room correction is a feature cited by WiiM, not a proven sound improvement in your living room.

Amplifiers related to this topic

Related products will be available soon.

Frequently asked questions

Do I need speakers as well as a stereo amplifier?

Yes, you’ll need to check which speakers can be used with the amplifier. WiiM describes the Amp Pro as an amplifier for a pair of passive speakers. If you already have active speakers, first work out whether you need a separate power amplifier.

Can I connect any turntable directly to a phono input?

No. First check the cartridge and whether the turntable already has a pre-amplifier. The Cambridge Audio EU manual explains which MM and high-output MC cartridges are compatible with the AXA35’s phono input; Marantz and Denon list MM phono for the models mentioned.

How do I get started setting up a streaming amplifier?

WiiM says to connect the Amp Pro to passive left and right speakers, then use the WiiM Home app and a network connection to set it up. Follow the manual for the version you buy for instructions on cables, power and the rest of the installation.

Who should I contact if an amplifier I bought online isn’t working properly?

According to the Dutch government, if a product is faulty, the seller—not the manufacturer—must provide a solution. There is no fixed statutory guarantee period that applies to all products in the Netherlands; what you can reasonably expect depends, among other things, on the product and the information provided. For online purchases from a business, you’ll often also have 14 days to change your mind, subject to legal exceptions.

Which EU safety information should I check for an amplifier in the Netherlands?

Check the product information, mains supply, safety instructions and applicable CE marking for the exact version. According to Your Europe, CE marking is only required for products covered by EU rules that require it. With some exceptions, the European Low Voltage Directive applies to equipment designed for 50–1,000 V AC. CE marking says nothing in itself about sound reproduction.