Who is this choice relevant to?

Listeners with existing passive speakers

If you want to keep using your existing speakers, first check that the amplifier is electrically and practically suitable for them. Denon Netherlands and Yamaha Netherlands publish connection and input information for specific models.

Jazz listeners with multiple music sources

If you switch between sources such as records, digital audio and wireless playback, it helps to have inputs and features that suit the sources you actually use at home. Denon Netherlands, Yamaha Netherlands and WiiM describe the different connection options available on each model.

Listeners with limited space

If you want a compact system in a small room, you should also consider your usual listening position. Genelec explains how the room and speaker placement help determine what you hear.

What should you look for?

Start by checking that the amplifier and speakers are a good match, then decide which sources you want to connect and finally consider whether the equipment and speaker layout will fit in your living room.

What to consider What to look for when buying Who is this important to?
Suitable speakers Check your speakers’ impedance, the manual for the exact model, and the power rating at a comparable load and measurement basis. I want to keep using my existing passive speakers and first make sure the amplifier is suitable for them. Around 36% of consumers put speaker compatibility first.
Stereo imaging from your listening position Check whether both speakers can be positioned in a similar way in relation to the side walls and listening position; assess the result from your usual seat. When I listen to live jazz recordings from my usual seat, I want to be able to position the speakers suitably in the room. Around 29% of consumers prioritise their listening position.
Inputs and playback Make a note of your current sources and check which inputs each model offers: MM phono, analogue line, optical or coaxial, as well as your preferred streaming method. I want to use my record player and digital or wireless sources without choosing features I don’t need. Around 21% of consumers choose mainly according to the music sources they need to connect.
Size and extra devices Measure the available space and check the dimensions and required ventilation clearance; also see whether your sources need an additional device. With limited space for equipment, I want to keep my system compact and avoid unnecessary extra devices. Around 14% of consumers prioritise space and keeping additional equipment to a minimum.

Common buying mistakes

  • Comparing wattage without checking the measurement conditions

    A power rating without the corresponding impedance and measurement conditions is not enough to compare amplifiers directly. Manufacturers provide figures based on the measurement standards for the relevant model.

    Only compare power ratings at a matching impedance and on the same measurement basis, and also check which speaker load the manual allows.

  • Buying an amplifier to fix poor speaker placement

    The position of the speakers and listener, as well as reflections in the room, can affect stereo imaging. A different amplifier will not automatically fix a placement problem; Genelec also highlights the importance of the room and speaker positioning.

    First, try to position the left and right speakers as similarly as possible, then assess the stereo image from your usual seat.

  • Assuming wireless playback is the same as every streaming feature

    Bluetooth audio and network streaming are different ways to play music. Denon lists Bluetooth for the PMA-600NE; WiiM describes network features for the WiiM Amp.

    Check that the exact model supports your preferred music service and method of control. If the amplifier doesn’t have the playback feature you need, you may need a separate music source.

Brands to consider

Denon

According to Denon Netherlands, the Denon PMA-600NE is an integrated amplifier for a range of source types, with Bluetooth, digital inputs and MM phono.

  • Denon specifies 45 W per channel at 8 ohms for the PMA-600NE. The manual recommends speakers rated at 4–16 Ω.
  • These model specifications alone say nothing about an audible advantage for jazz or about other Denon models.

Yamaha

The Yamaha A-S301 is a traditional integrated amplifier with optical and coaxial inputs for compatible standalone sources.

  • Yamaha Netherlands specifies 60 W + 60 W RMS at 8 ohms, 20 Hz–20 kHz and 0.019% THD. The stated dimensions are 435 × 151 × 387 mm.
  • These stated figures do not prove an audible advantage over another model; also check that the dimensions suit your setup.

WiiM

WiiM describes the WiiM Amp as a compact streaming amplifier for passive speakers, with network features and HDMI ARC.

  • WiiM lists dimensions of 190 × 190 × 63 mm and 60 W per channel at 8 ohms; the inputs listed are HDMI ARC, optical and line.
  • The listed inputs do not include a dedicated phono input. Check whether your record player has a suitable preamplifier and whether the exact version suits your sources.

NAD

NAD describes the C 316BEE V2 as an amplifier for a straightforward, mainly analogue setup with MM phono.

  • NAD Electronics lists 40 W continuous per channel, five analogue line inputs, an MM phono input and a headphone output.
  • The product information cited relates to US sales and does not confirm the price or availability in the Netherlands.

Marantz

Marantz Netherlands describes the MODEL 40n as an integrated stereo amplifier with HDMI ARC and HEOS network features.

  • Marantz specifies 70 W per channel for this model and lists its built-in features.
  • Brand descriptions of sound and design are not an independent comparison and do not automatically apply to other models in the Marantz range.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a phono input for a record player?

Not always: first check whether the record player itself has a suitable phono preamplifier. If a record player with an MM cartridge does not, you’ll need a compatible MM phono input or a separate phono preamplifier. Denon lists an MM phono input for the PMA-600NE.

How do I connect passive speakers?

Follow the manual for the exact amplifier model. For the PMA-600NE, Denon recommends unplugging the amplifier before connecting the speakers, making sure exposed cable strands do not touch each other or the rear panel, and checking the polarity.

What should I do if an amplifier I bought online doesn’t work properly?

According to the Dutch government, if a product is faulty, the seller is your point of contact for a solution; there is no set statutory warranty period for all products in the Netherlands. In many cases, online purchases from a business also come with a 14-day cooling-off period. Check which terms and exceptions apply to your purchase.

Is CE an independent certification mark that confirms an amplifier is safe?

No. According to the Netherlands Enterprise Agency, CE is a conformity marking by which the manufacturer declares that the product meets the applicable EU requirements; it is not an independent safety certification. For a specific offer in the Netherlands, check the exact version and the relevant product information.