Who is this buying guide for?

Listeners with speakers close to the wall

You can’t move your speakers and want to assess or adjust the bass balance of your recordings. The distance from the wall can affect low frequencies, but the result also depends on the speakers and listening position. Genelec explains this placement effect in its guide to wall reflections.

Listeners with existing passive speakers

You want to check that their impedance and your preferred listening volume are suitable for the amplifier. The manuals from brands such as Marantz and Denon, along with Cambridge Audio’s model information, show why you need to check each combination.

Listeners with a fixed audio source

Your choice depends on how you play brass band recordings: through an analogue player, a digital output or a supported streaming service. Connections and playback options vary by model, as the product information from NAD and WiiM shows.

What should you look for?

First check your speakers’ impedance and placement. Then compare power and source connections, and treat tone or room correction as tools for fine-tuning.

What to consider What should you check? Who is this important for?
Bass balance near the wall Check your speakers’ placement guidance and see whether the amplifier offers tone controls or room correction. If you can’t move your speakers, you’ll want to know whether the bass needs adjusting where you listen. Around 29% of consumers say bass balance near the wall is their main consideration.
Suitable speaker load Check your speakers’ impedance and the permitted load for the exact amplifier model. If you already have passive speakers, you’ll want to know in advance whether the manufacturer considers them suitable for the amplifier. Around 29% of consumers prioritise matching their speakers to the amplifier.
Power and listening volume Compare power ratings only when the impedance and measurement conditions are the same. Also take your speakers and listening distance into account. If you want to play brass band recordings at your preferred volume, a suitable match matters more than a higher wattage figure alone. Around 24% of consumers focus on power for their preferred volume and musical peaks.
Source connection Make a note of your player’s output and check the amplifier’s inputs and supported services. If you use a particular player or streaming setup, you’ll want to be able to connect or play it directly. Around 18% of consumers prioritise compatibility with their own audio source.

Common buying pitfalls

  • Assuming a higher wattage means better sound

    Power ratings may be given at different impedances, across different frequency ranges and at different distortion levels. That means they aren’t necessarily directly comparable.

    Compare figures measured on the same basis, and also check your own speakers and preferred listening volume.

  • Expecting correction to remove every effect of speaker placement

    Wall reflections can boost or cancel out low frequencies. Tone controls or room correction won’t automatically remove the effects of speaker and listening position.

    Assess the bass where you listen and check your speakers’ placement guidance before making a correction feature the deciding factor.

  • Assuming a NETWORK input means streaming is built in

    Marantz doesn’t list built-in Wi-Fi or wired network playback for the PM6007; a NETWORK line input isn’t the same as a network player.

    Check separately which physical input your source uses and whether the streaming service you want is actually supported.

    You may need a separate compatible network player for network playback.

Brands to consider

WiiM

The Amp Pro combines streaming with connections for passive speakers. It may suit you if you’re looking for streaming and extra options for fine-tuning.

  • WiiM lists 60 W per channel at 8 ohms and 120 W at 4 ohms, along with HDMI ARC, EQ and room correction.
  • Check that your streaming service is supported and that the set-up process suits your system; room correction isn’t guaranteed to work for every room.

Yamaha

The A-S501 is a conventional integrated amplifier with digital inputs and adjustable loudness, designed for listeners who also want to fine-tune the sound manually.

  • Yamaha Europe specifies a minimum of 85 W + 85 W RMS at 8 ohms, 20 Hz–20 kHz and 0.019% THD.
  • The loudness control doesn’t show you what the bass balance will be like where you listen. Check that your speakers are a suitable match and assess their placement for yourself.

Denon

The PMA-600NE combines analogue and digital sources with Bluetooth and tone controls.

  • The EU manual specifies 45 W + 45 W at 8 ohms across 20 Hz–20 kHz and at 0.07% THD.
  • The 70 W + 70 W rating at 4 ohms uses different measurement conditions: 1 kHz and 0.7% THD. So don’t compare this figure directly with ratings measured under different conditions.

Marantz

The PM6007 is a conventional amplifier with digital and analogue inputs, plus bass and treble controls.

  • The EU manual lists 45 W × 2 at 8 ohms and 60 W × 2 at 4 ohms, both across 20 Hz–20 kHz with both channels driven simultaneously.
  • Marantz doesn’t list built-in Wi-Fi streaming for this model. A NETWORK line input isn’t a built-in network player.

Cambridge Audio

The AXA35 is an integrated amplifier designed for analogue sources. It’s only suitable if your speakers meet the model’s specific requirements.

  • Cambridge Audio specifies the AXA35 for 8-ohm speakers.
  • Cambridge Audio advises against using 4- or 6-ohm speakers with this model because they could cause it to overheat. This is a limitation of the AXA35, not all amplifiers from the brand.

Related products

Related products will be available soon.

Frequently asked questions

Do you need to buy a more powerful amplifier if your speakers are close to the wall?

No, not for that reason alone. The distance from the wall and the room can affect bass reproduction, so first assess the placement and follow your speaker manufacturer’s guidance. Check the power separately against your speakers and preferred listening volume.

Can you connect your existing speakers to any stereo amplifier?

No. Check that your speakers are passive and that their impedance falls within the specifications for the exact amplifier model. For example, Cambridge Audio specifies the AXA35 for 8-ohm speakers and advises against using 4- or 6-ohm speakers with that model.

Does a NETWORK input mean the amplifier supports streaming itself?

No. A line input labelled NETWORK doesn’t in itself prove that a network player is built in. Marantz doesn’t list Wi-Fi, wired networking or built-in streaming for the PM6007, so check the features of the exact model and how your source connects.

How do you compare the power ratings of two amplifiers?

Compare the figures only when the impedance, frequency range and distortion level match. Yamaha Europe and Denon list different measurement conditions for the A-S501 and PMA-600NE, so a higher wattage figure alone won’t tell you which amplifier is better suited to your speakers and listening volume.

Will room correction always fix unsuitable speaker placement near the wall?

No. Room correction can give you another way to fine-tune the sound, but the result still depends on the speakers, their distance from the wall and your listening position. Follow your speakers’ placement guidance and assess the bass where you listen.