Who is this choice relevant to?

Listener with existing speakers

You want to keep your passive speakers and are looking for an amplifier that suits their impedance and your listening distance.

Listener in a reverberant loft

You’re mainly noticing reflections or an unclear stereo image and want to know what different placement or room correction could do. Genelec explains how the room and speaker placement affect sound reproduction.

Listener with digital recordings

You want to play brass band recordings from sources such as a CD player, TV or music service, and are comparing existing connections with built-in streaming.

What should you consider when choosing?

First check that the amplifier is compatible with your speakers and source. Then consider whether you need streaming or room correction for the way you listen.

What to consider What should you check? Who is this most relevant to?
Speaker compatibility Check the supported impedance and the manufacturers’ guidance. Compare power ratings only at the same impedance and under the same measurement conditions. I want to keep my existing passive speakers and first check that the amplifier is compatible. Around 36% of consumers prioritise speaker compatibility.
Room and listening position First try a workable arrangement for your speakers and listening position. Then check whether the exact model offers room correction and what you need to use it. If reflections or the stereo image in my loft are bothering me, I want to assess the setup first. Around 29% of consumers prioritise listening position and room acoustics.
Connections and controls Compare the outputs on your source with the amplifier’s inputs. If you’re using streaming, also check that your preferred music service and control options are supported. I want to connect my CD player, TV or digital recordings without unnecessary extra equipment. Around 21% of consumers prioritise source connections and controls.
Complete system and aftercare Check whether a streamer or correction module is included, and read the seller’s terms. I want to know in advance which components are included in my system and what aftercare terms apply. Around 14% of consumers prioritise the total cost and aftercare.

Common pitfalls

  • Comparing wattage without considering impedance and measurement conditions

    An RMS rating at 8 ohms and a maximum rating at 4 ohms are not based on the same measurements. So comparing the figures alone tells you little about whether the amplifier will suit your speakers.

    Compare specifications under the same conditions and check the guidance for the exact amplifier and speakers.

  • Buying an amplifier to solve all your reflection problems

    Genelec points out that hard surfaces and the positions of your speakers and listening position affect sound reproduction. Calibration may not be enough to solve every room problem.

    Assess your setup and listening position first, and treat room correction as an added benefit. Acoustic treatment may require extra time or expense, so first see what a different arrangement can achieve.

  • Assuming streaming or room correction is included as standard

    Bluetooth isn’t the same as network streaming. According to NAD, the standard NAD C 3050 requires the optional MDC2 BluOS-D module for BluOS and Dirac Live.

    Compare the features of the exact version and check which components are actually included. A separate streamer or expansion module may mean you need extra equipment.

Brands to consider

Yamaha

The A-S301 is an integrated amplifier for existing sources, including compatible optical and coaxial digital sources.

  • Yamaha specifies a minimum RMS output of 60 W + 60 W at 8 ohms for the A-S301.
  • The quoted 95 W + 95 W is a maximum at 4 ohms under different measurement conditions. Don’t compare these figures as if they were measured in the same way.

Denon

The PMA-600NE combines connections for separate sources with Bluetooth and an MM phono input.

  • Denon specifies 45 W per channel at 8 ohms and 70 W at 4 ohms, alongside digital inputs and an MM phono input.
  • Bluetooth isn’t built-in network streaming. Check that the available connections suit your sources.

WiiM

The WiiM Amp and Amp Pro combine amplification for passive speakers with network streaming and Room Correction.

  • WiiM specifies 60 W per channel at 8 ohms and 120 W at 4 ohms for both models.
  • WiiM lists AirPlay 2 for the Amp, but not the Amp Pro. Also check that your music service, network and preferred connections are supported.

NAD

The C 3050 can be upgraded to add BluOS streaming and Dirac Live.

  • According to NAD, streaming and Dirac Live are available with the optional MDC2 BluOS-D module.
  • The Limited Bandwidth correction available with this module extends up to 500 Hz. Check whether the module is included with the version on offer.

Marantz

The PM6007 is an integrated stereo amplifier for a two-channel system with separate sources.

  • Marantz specifies 2 × 45 W at 8 ohms RMS, measured from 20 Hz to 20 kHz.
  • Make sure the connections and speaker load suit your equipment. A power rating alone won’t tell you how the combination will sound in your loft.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need to buy a different amplifier first to reduce echo or improve an unclear stereo image in your loft?

No. Assess your setup and listening position first. Genelec explains that surfaces and the positions of your speakers and listening position affect sound reproduction; calibration alone may not be enough. This is general advice on speaker placement, not a measurement of your loft.

Can you connect a record player or TV to every amplifier mentioned?

Not without checking the connections on both devices. Denon lists an MM phono input for the PMA-600NE, while Yamaha lists optical and coaxial inputs for the A-S301. Check that the connections suit your exact source and model version.

How should you set up your system once it’s in place?

Start with the position of your speakers and listening position. If you use Room Correction, follow the instructions for your exact device. Don’t assume another model has the same feature, or that correction can replace acoustic treatment.

What are your rights when buying online in the Netherlands?

According to ACM ConsuWijzer, for a typical online purchase of a product, you generally have up to 14 days after delivery to change your mind, subject to statutory exceptions. Your statutory guarantee is separate from any manufacturer’s guarantee: if a product doesn’t perform as you could reasonably expect under normal use, the seller is responsible for providing an appropriate solution.

Is CE marking compulsory for a stereo amplifier sold in the Netherlands?

Yes. The Netherlands Food and Consumer Product Safety Authority states that CE marking is compulsory for electrical products. This is a product safety requirement and doesn’t prove that an individual item on offer has been checked separately.