Who is this choice relevant to?

Vinyl listeners

You mainly play records and want to check that your cartridge, any phono preamp and your passive speakers work well together. Denon and Cambridge Audio describe phono connections for specific amplifier models, so check that they’re compatible with your turntable.

Listeners with multiple sources

You switch between physical music and digital or streamed blues. The inputs you need and how you want to stream will determine which amplifier features matter to you. Yamaha, Denon and Marantz describe different combinations of connections and network features.

Loft dwellers with existing speakers

You want to keep your passive speakers and find a suitable setup. According to Yamaha Corporation of America, placing a speaker close to a wall can affect the bass, so consider how your speakers will be positioned in your own room.

What should you look for?

Analogue amplifier with phono

A good fit if: vinyl is your main source and your turntable cartridge is compatible with the phono input.

Bear in mind: you may need additional equipment for network streaming or digital sources.

Phono, digital inputs and Bluetooth

A good fit if: you want to combine, for example, MM vinyl with a digital source or Bluetooth playback.

Bear in mind: Bluetooth isn’t the same as built-in network streaming. Also check the supported speaker impedance.

Network stereo amplifier

A good fit if: you want to stream directly over your network and the model’s connections suit your sources.

Bear in mind: check that each model supports the service and controls you want. According to Yamaha, the R-N600A doesn’t have HDMI ARC, while Marantz lists HDMI ARC and HEOS for the MODEL 40n.

The table organises the choice around one main priority for each shopper: their source, existing speakers, streaming or listening space.

What to consider What should you check? Who should prioritise this?
Source connection Make a note of the output from your main source. For vinyl, check the cartridge, whether the turntable has a built-in phono preamp and the amplifier’s input. If I mainly play records, I want to listen to my collection without unnecessary extra equipment. Around 33% of consumers say connecting their main source is their top priority.
Existing speakers Check whether they’re passive speakers and compare their impedance with the amplifier’s manual. Denon specifies 4–16 ohms for the PMA-600NE; Cambridge Audio specifies 8 ohms for the AXA35. If I want to keep my passive speakers, the amplifier needs to be compatible with them. Around 25% of consumers put this compatibility first.
Streaming and digital sources Decide whether the amplifier needs to stream over your network itself, or whether Bluetooth or an external player will do. Yamaha lists Wi-Fi and Ethernet for the R-N600A; Bluetooth alone doesn’t confirm network streaming. If I want to stream blues directly over my network, I’ll look at the built-in network features and controls I want. Around 25% of consumers give direct streaming top priority.
Setup and listening volume Consider how far your speakers will be from walls, where they’ll be positioned and how far away you’ll sit. When choosing your listening volume, bear in mind any agreements with your neighbours. If space for positioning is limited in my loft, I want to know how to set up the speakers in the room and what volume I can comfortably listen at. Around 17% of consumers say their listening space is their top priority.

Common buying pitfalls

  • Confusing a phono input with a standard line input

    Your turntable and amplifier need compatible connections and settings. A phono input isn’t interchangeable with a line input.

    Before you buy, check which cartridge your turntable uses and whether it already has a phono preamp built in. Cambridge Audio describes the AXA35’s phono connection as suitable for a turntable without its own phono stage.

    If your signal chain needs a phono preamp, you may need a separate device.

  • Assuming Bluetooth is the same as full network streaming

    Bluetooth and network playback are different features. A Bluetooth connection doesn’t automatically mean the amplifier can stream music online by itself.

    Decide whether you want to play music from a paired device or have the amplifier stream directly over your network. Check the features of the exact model to find out.

  • Comparing power ratings without considering impedance or test conditions

    A power rating at 4 ohms isn’t directly comparable with one at 8 ohms. A power figure alone also doesn’t confirm that an amplifier is suitable for your speakers.

    Compare the full power specifications under the same impedance and test conditions, and check the manual for the supported speaker impedance.

Brands to consider

Yamaha

The R-N600A is a network amplifier for anyone looking for digital sources and a phono input in one stereo unit.

  • Yamaha lists Wi-Fi, Ethernet, AirPlay 2 and a phono input. Its rated output is 80 W + 80 W at 8 ohms under the stated test conditions.
  • The R-N600A doesn’t have HDMI ARC. Its rated output doesn’t indicate how it will perform in your loft.

Denon

According to Denon, the PMA-600NE combines MM phono, Bluetooth and digital inputs for a range of connected sources.

  • Denon lists 45 W per channel at 8 ohms; the manual specifies speakers of 4–16 ohms.
  • Bluetooth alone doesn’t confirm built-in network streaming. Compare specifications under the same load and test conditions.

Cambridge Audio

The AXA35 is an analogue option with a built-in phono stage.

  • Cambridge Audio lists 35 W per channel and says it can be used with 8-ohm speakers.
  • According to Cambridge Audio, the rear USB connection can’t be used to add Bluetooth via a USB adapter.

Marantz

According to Marantz, the MODEL 40n combines network features with HDMI ARC, which may be useful if you also want to connect a TV to your stereo system.

  • Marantz lists HEOS, HDMI ARC and 70 W per channel.
  • Choose the extra features that suit your own sources. The product description alone doesn’t demonstrate an audible benefit for blues.

NAD

According to NAD, the C 316BEE V2 is geared towards analogue listening, with MM phono and several line inputs.

  • NAD lists 40 W continuous power per channel and five analogue line inputs.

Related products

Related products coming soon.

Frequently asked questions

Can your turntable connect directly to an amplifier with a phono input?

It depends on the cartridge and whether the turntable has a built-in phono preamp. Denon specifies MM phono for the PMA-600NE; Cambridge Audio describes the AXA35 as suitable for connecting a turntable without its own phono stage. Check the settings and manuals for both devices.

What should you check when connecting your speakers?

First, check that your speakers’ impedance is within the range specified in the amplifier’s manual. Denon lists 4–16 ohms for the PMA-600NE. According to the Denon manual, unplug the amplifier from the mains before connecting the speakers, check the polarity and make sure no stray wire strands are sticking out.

What are your rights when you buy an amplifier online or if it develops a fault?

For a typical online consumer purchase, ACM ConsuWijzer says you generally have up to 14 days after delivery to change your mind, subject to statutory exceptions. In the Netherlands, your statutory guarantee depends on what you could reasonably expect from the product. If a product is faulty, the seller is responsible for providing an appropriate solution.