Who should consider this?

Listener with existing passive speakers

Looking for an amplifier to suit their speakers’ load, listening distance and preferred volume in a large living room.

Blues fan with a record collection

Wants to connect a turntable, so checks where the phono preamp is and which cartridge is supported.

Listener with a digital collection

Plays CDs, digital files or streams and is looking for inputs and playback features to suit their sources.

What should you look for when choosing?

Traditional integrated stereo amplifier

A good fit if: you mainly use existing sources, such as a CD player and passive speakers.

Worth noting: built-in network streaming isn’t a given, so you may need a separate playback source.

Integrated network amplifier

A good fit if: you also want to play music over your home network. Denon lists HEOS for the PMA-900HNE; check that it supports your preferred service and controls.

Worth noting: connections vary by model. According to WiiM, the WiiM Amp Pro has no phono input, so a turntable without its own preamp will need a separate phono preamp.

Stereo receiver with radio

A good fit if: you want to listen to DAB+ or FM as well as your own collection.

Worth noting: a tuner isn’t the same as network streaming. Check which playback options the specific model offers.

Consideration What should you check? Who is this relevant to?
Speakers and listening distance Note your speakers’ impedance and compare continuous power only at the same impedance and under the same test conditions. Check the permitted speaker load in the manual for the exact model. I want an amplifier that suits my existing speakers and listening position, rather than choosing based on a high wattage alone. Around 34% of consumers give speaker matching top priority.
Turntable and phono Check whether the turntable has a built-in preamp and whether the amplifier supports the cartridge you use. A standard line input isn’t automatically a phono input; the Consumentenbond explains that a turntable needs phono pre-amplification. If my blues collection is on vinyl, I want to know whether I can connect the turntable directly or need an additional preamp. Around 27% of consumers prioritise a turntable connection.
CDs, files and streaming Make a list of your sources and their outputs. For each model, check that it has the right input and, for streaming, supports your preferred service and playback method. I want to play my CDs, digital files or streams using a suitable connection, rather than assume that Bluetooth or a digital input also means network streaming. Around 26% of consumers give digital playback options top priority.
Expansion and additional equipment Check which connections you might need later and whether you’ll need a separate device for a source, streaming or phono. I want to be able to expand my setup and know in advance which connections may require separate equipment. Around 13% of consumers prioritise expandability and the equipment they’ll need.

Common buying mistakes

  • Treating maximum power and continuous power as the same

    According to Yamaha, the A-S501 is rated at 85 W + 85 W minimum RMS at 8 Ω across 20 Hz–20 kHz, and also at 120 W + 120 W maximum power at 4 Ω and 1 kHz. These figures are based on different test conditions.

    Only compare power ratings once you’ve checked the impedance, frequency range and definition of power.

  • Mistaking a line input for a phono input

    A turntable needs phono pre-amplification. This may be built into the turntable or amplifier, but it isn’t always included; the Consumentenbond explains the difference.

    Check the whole signal chain and make sure the phono input suits the cartridge. If the turntable has no preamp and the amplifier has no suitable phono input, you’ll need a separate phono preamp.

  • Confusing Bluetooth, digital inputs and network streaming

    These are different ways to play audio. A digital input on an amplifier or Bluetooth support doesn’t, by itself, mean the model also offers network streaming.

    Check the connections and playback features of the exact model against the sources you actually use.

Brands to consider

Yamaha

The A-S501 is an example of an integrated amplifier with analogue and digital connections.

  • Yamaha rates the A-S501 at 85 W + 85 W continuous at 8 Ω (20 Hz–20 kHz).
  • This specification doesn’t mean the model sounds better with blues than other amplifiers. There’s no evidence that this model has built-in network streaming.

Denon

According to Denon, the PMA-900HNE combines stereo sound with HEOS streaming, digital inputs and MM/MC phono.

  • Denon rates it at 50 W per channel at 8 Ω and 85 W at 4 Ω.
  • These power ratings are for different speaker loads, so they aren’t directly comparable.

WiiM

WiiM positions the Amp Pro for network playback with passive speakers; its listed connections include line, optical and HDMI ARC.

  • WiiM rates it at 60 W per channel at 8 Ω and 120 W at 4 Ω.
  • The listed inputs don’t include a phono input. If you’re using vinyl, check where the phono pre-amplification takes place in the signal chain.

Cambridge Audio

According to Cambridge Audio, the AXR100D is a stereo receiver with DAB+/FM radio and MM phono.

  • Cambridge Audio rates this model at 100 W at 8 Ω; the manufacturer also lists digital inputs.
  • The product information consulted isn’t specific to the Netherlands. Bluetooth and a tuner don’t prove that network streaming is built in; check the version and features before buying.

Marantz

According to Marantz, the MODEL 50 is an integrated amplifier with MM phono and stereo preamp outputs.

  • The preamp outputs may be useful if you want to add external amplification later.
  • Marantz’s description of its sound is the manufacturer’s own and isn’t an independent comparison or a guarantee of how it will sound in your living room.

Joybuy products

Related products coming soon.

Frequently asked questions

How do you connect a turntable without a built-in preamp?

Use a phono input that suits the cartridge, or connect a separate phono preamp before a standard audio input. A line input isn’t automatically a phono input; the Consumentenbond explains why phono pre-amplification is needed.

Can you simply choose the highest wattage for a large living room?

No. You should also consider your speakers, listening distance and preferred volume. Compare continuous power only at the same impedance and under the same test conditions. For example, Yamaha rates the A-S501 at 85 W + 85 W minimum RMS at 8 Ω and, separately, at 120 W + 120 W maximum power at 4 Ω under different test conditions.

How do you use your amplifier and speakers safely?

Follow the installation and safety instructions for the exact version, and check the specified speaker load and power supply before connecting anything. Follow the space and impedance requirements in the manual for the model you’re buying, rather than relying on assumptions that apply to all amplifiers.

What are your rights if a product is faulty or you buy online in the Netherlands?

If a product is faulty, the seller must provide an appropriate solution. According to the Rijksoverheid, there is no general fixed statutory guarantee period in the Netherlands. For a standard online purchase, you usually have up to 14 days after delivery to change your mind, subject to exceptions. Check the details of your purchase with ACM ConsuWijzer.

Does a new stereo amplifier in the Netherlands need a CE mark?

Electrical equipment covered by the relevant EU rules must carry a CE mark. The Low Voltage Directive applies, among other things, to equipment designed for 50–1.000 V AC; check which rules apply to the specific version. A CE mark isn’t an independent sound test.