Which amplifier setup is right for you?

Listener with vinyl or CDs

You want to connect your blues collection on vinyl or CD and check which input and any phono pre-amplification you’ll need.

Listener with a digital collection

You want to stream digital music through a stereo system with passive speakers.

Listener with existing speakers

You want to know whether a new amplifier will work with your current speakers and fit in the space available in your cabinet.

What should you look for in a stereo amplifier for blues?

Start with your music source, then check that the amplifier suits your speakers and the space you have available.

Amplifier with a phono input

A good fit if: you mainly play vinyl and the amplifier has a suitable phono input for your turntable.

Consider: checking the cartridge type and whether your turntable already has a phono preamp.

Network CD receiver

A good fit if: you want to play CDs and have network playback in the same device.

Consider: a built-in CD player adds little if you already have a suitable separate player.

Streaming amplifier

A good fit if: you want to play digital music using network features and passive speakers.

Consider: checking the physical inputs; some models don’t have a phono input or built-in CD player.

Network stereo amplifier with phono

A good fit if: you want to use both vinyl and network sources, and have enough room for the amplifier.

Consider: checking the dimensions and connections of the exact model before putting it in your cabinet.

What to consider What to look for when buying Who is this important for?
Turntable and phono pre-amplification Check the cartridge type, whether the turntable has a built-in preamp, and the type of phono input on the amplifier. If I want to play vinyl, I’ll check that my turntable and amplifier are compatible to avoid needing an extra preamp. Around 33% of consumers make vinyl their top purchasing priority.
Playing CDs Decide whether you already have a CD player and check that its output is compatible with an input on the amplifier model. If I listen to CDs, I want to know whether I need a built-in player or can connect my existing device. Around 25% of consumers make CD playback their top purchasing priority.
Digital music and streaming Check which streaming services and physical inputs the exact model supports. If my blues collection is digital, I want to play music over the network without unnecessary extra equipment. Around 25% of consumers make streaming their top purchasing priority.
Speakers and cabinet space Establish whether your speakers are active or passive, and measure the space available for the amplifier. If I want to keep my current speakers, I’ll check that they’re compatible with the amplifier and that it fits in my cabinet. Around 17% of consumers make speaker compatibility and space their top purchasing priority.

Common pitfalls when buying a stereo amplifier

  • Connecting a turntable without suitable phono pre-amplification to a line input

    A turntable needs phono pre-amplification. This may be built into the turntable, provided by a suitable phono input, or supplied by a separate device. The Dutch Consumers’ Association stresses that this isn’t built into every turntable or amplifier.

    Before connecting your devices, check your turntable’s output and cartridge type, as well as the type of phono input on the amplifier.

    If neither device provides the necessary pre-amplification, you may need a separate phono preamp.

  • Confusing a CD connection with a built-in CD player

    An input for an external CD player doesn’t mean the amplifier can play CDs itself. The Marantz M-CR612 has a built-in CD player; for the WiiM Amp, the manufacturer describes how to connect a separate player.

    Check whether the product description mentions a built-in player or only an audio input for an external device.

    If there’s no built-in CD player, you’ll need a separate one if you want to keep playing CDs.

  • Looking only at the stated wattage

    Power ratings can use different loads and measurement conditions. For example, Yamaha lists a measurement condition of 20 Hz–20 kHz at 0.07% THD for the R-N600A. Don’t compare figures like these without taking the conditions into account.

    Check your speakers and sources first, and only compare power specifications when the units and measurement conditions match.

Brands and relevant stereo models

The features and limitations listed apply to the specific models below; they aren’t a judgement on a brand’s entire range.

Denon

The PMA-600NE is an integrated stereo amplifier with analogue and digital connections, as well as Bluetooth.

  • Denon specifies 45 W per channel at 8 ohms and an MM phono input for the PMA-600NE.
  • Bluetooth isn’t the same as HEOS network playback; that feature is available on another model, the PMA-900HNE.

Marantz

The PM6007 is an integrated amplifier for separate sources, while the M-CR612 combines CD playback with HEOS.

  • The Marantz PM6007 manual lists 45 W × 2 at 8 ohms, an MM phono input, and optical and coaxial digital inputs. Marantz lists built-in CD playback and HEOS for the M-CR612.
  • The PM6007 and M-CR612 are different types of device; check which source features you need.

Yamaha

The R-N600A combines network playback with phono, analogue and digital inputs.

  • Yamaha specifies 80 W + 80 W at 8 ohms under the stated measurement conditions, as well as Wi-Fi and a phono input.
  • Yamaha doesn’t list HDMI ARC and gives the dimensions as 435 × 151 × 392 mm. Allow for extra height when the antenna is raised.

WiiM

The WiiM Amp combines network streaming with connections for external sources and passive speakers.

  • WiiM specifies 60 W per channel at 8 ohms, HDMI ARC, and line and optical inputs for the Amp.
  • The WiiM Amp has no phono input or built-in CD player. The Amp Pro’s specifications don’t automatically apply to the Amp.

Cambridge Audio

The AXA35 is an integrated stereo amplifier with a built-in phono stage.

  • Cambridge Audio lists 35 W per channel and a built-in phono stage for the AXA35.
  • According to Cambridge Audio, this model has no subwoofer output or variable pre-out; check this if you want to connect a subwoofer.

Joybuy amplifiers for this listening setup

Related products coming soon.

Frequently asked questions

Can I connect my turntable directly to any stereo amplifier?

No. A turntable needs suitable phono pre-amplification, which may be built into the turntable, provided by a phono input on the amplifier, or supplied by a separate device. Check what your devices offer before connecting them; the Dutch Consumers’ Association points out that this pre-amplification isn’t always built in.

Do I still need an amplifier if my speakers are active?

Not necessarily: active speakers have built-in amplification. First find out whether your speakers are active or passive, then check which connection option suits your setup. AVForums makes the same distinction when discussing the choice of a separate amplifier.

How do I connect an existing CD player to a WiiM Amp?

According to the WiiM Help Center, you can connect a CD player with an analogue line output to Line In using an RCA cable. Check whether your CD player has this output.

How long do I have to change my mind and what guarantee applies to online purchases in the Netherlands?

For online purchases from a business, you generally have 14 days to change your mind, according to the Dutch government. The Netherlands doesn’t have a fixed statutory guarantee period, according to the Dutch government: you’re entitled to a product that works properly, and the retailer is your point of contact if it doesn’t.