Listeners with passive speakers
You want to know whether an amplifier is compatible with your speakers and which sources you can connect to it. Manufacturer information from Yamaha Netherlands and WiiM covers amplifiers for passive speakers.
Start with your speakers and the source of your blues recordings. Passive speakers need a suitable amplifier, while active speakers already have amplification built in. Then decide between an amplifier for separate sources and a model with built-in network streaming. In an open-plan flat, speaker placement and how easy the system is to use at your usual listening volume matter too.
You want to know whether an amplifier is compatible with your speakers and which sources you can connect to it. Manufacturer information from Yamaha Netherlands and WiiM covers amplifiers for passive speakers.
You want to stream blues over your network and weigh up whether built-in streaming is convenient or a separate streamer would better suit your set-up. Product information from Marantz, Denon and WiiM describes different network streaming options.
You want to take your listening position and preferred volume into account. Genelec explains how room acoustics and speaker placement affect what you hear; the police advise trying to agree a solution together first if noise becomes a problem.
| What to consider | What to check before buying | Who this matters to |
|---|---|---|
| Speaker compatibility | Check whether your speakers are active or passive, and look at the stated load and connection instructions for the exact amplifier model. | If you want to keep using your existing speakers, first make sure the combination is compatible. Compatibility is the top priority for around 28% of consumers. |
| Streaming and digital sources | Check whether the model supports your preferred streaming service and playback protocol, or has the right digital input. | If you want to play blues directly from a streaming service, built-in streaming is an alternative to a separate streamer. Around 22% of consumers prioritise direct streaming. |
| Listening position and controls | Consider where you’ll place your speakers and listening seat, and which loudness, tone or room settings the model offers. | If you listen at a modest volume in an open-plan living space, you’ll want to tailor the set-up to your listening position and consider others around you. This is the top priority for around 22% of consumers. |
| Vinyl, CDs and other sources | For a turntable, check the cartridge type and whether a phono preamp is built in; make sure other players are compatible with the available inputs. | If you want to connect an existing record or CD player, the right inputs are essential. Around 17% of consumers give physical music sources top priority. |
| Complete set-up | Make a note of the sources and devices you already have, and check whether you’ll also need a streamer or phono preamp. | If you want to know what you’ll need for your complete set-up, look beyond the amplifier alone. Around 11% of consumers prioritise the whole system. |
Power ratings can be given for different speaker loads and under different testing conditions. A wattage figure on its own doesn’t tell you whether an amplifier is right for your speakers.
Check your speaker specifications first, and only compare power ratings when the load and measurement conditions are the same.
A digital input is for connecting an external source. According to Marantz, the Marantz PM6007 does not have built-in Wi-Fi or network streaming. If you want to stream directly, you may need a separate network source.
Check whether you want to play music from a connected device or directly from a supported streaming service.
A separate network source takes up extra space and may add to the cost.
A turntable with only a phono output needs a suitable phono preamp. WiiM says the WiiM Amp Pro does not have a built-in phono input.
Check your turntable’s cartridge and output, and see whether the turntable or amplifier already has a suitable phono stage.
If it doesn’t, you may need a separate phono preamp.
WiiM lists AirPlay reception for the WiiM Amp, but not for the WiiM Amp Pro. So a feature available on one model isn’t automatically available on the other.
Check the full model name and make sure it supports the playback protocol you need.
The Yamaha A-S501 is an integrated amplifier with phono and digital inputs. Yamaha also lists an adjustable loudness control.
According to WiiM, the WiiM Amp Pro combines network streaming, amplification for passive speakers and HDMI ARC.
The PM6007 is designed for separate analogue and digital sources and, according to Marantz, has an MM phono input.
According to Denon, the PMA-900HNE combines HEOS network streaming with digital inputs and an MM/MC phono input.
The AXA35 is a straightforward integrated amplifier, mainly for analogue sources and a compatible MM turntable.
Usually not for speaker amplification: active speakers already have it built in. However, check that your source output is compatible with your speakers’ input. An amplifier for passive speakers isn’t automatically the right choice.
No, not if the turntable only has a phono output and the amplifier doesn’t have a suitable phono input. In that case, you’ll need a phono preamp, either built into the turntable or amplifier, or as a separate device. WiiM confirms that the WiiM Amp Pro has no built-in phono input.
Start with your listening position and the placement of both speakers. Genelec explains that the room and speaker placement affect what you hear. This doesn’t guarantee that an amplifier setting will stop sound travelling to other homes.
According to the Dutch government, consumers buying at a distance have a 14-day cooling-off period in many cases. If a product doesn’t meet the terms of the agreement, you can contact the seller. The Dutch government says there is no fixed statutory two-year guarantee period in the Netherlands.
A CE mark is required for products covered by the applicable harmonised EU rules. The Low Voltage Directive applies, among other things, to equipment with a rated voltage of 50–1.000 V AC or 75–1.500 V DC. A CE mark is not an individual product sound test. There is no general time when playing music is automatically allowed in every flat: take account of the rules that apply to your building, tenancy or local council. The police and the Juridisch Loket advise trying to agree a solution with your neighbours first if there’s a noise problem.