Who is this for?

Playlist listener with passive speakers

If you want to start ambient playlists in your hobby room, you’ll need to weigh up built-in streaming against using a separate player. WiiM lists streaming features for the Amp.

Owner of existing speakers

If you want to keep using your current passive speakers, check that the amplifier is suitable for their permitted load. Sonos explains the difference between active speakers, which have built-in amplification, and passive speakers, which need external amplification.

Relaxed listener using separate sources

If you listen at a modest volume while working on your hobbies, you’ll want to control your sources and volume in a way that suits your set-up. Yamaha describes the A-S301 as having an adjustable loudness control.

What should you look for when choosing?

First decide how you want to play music and which speakers and sources you want to keep using. Then choose controls that work for where you sit in your hobby room.

Key consideration What to check before buying Who is this important for?
Playlists without an extra player Check that the exact model supports your music service and preferred way of controlling it. If you want to start ambient playlists directly, built-in streaming should be your first priority; around 36% of consumers prioritise playlist playback.
Connecting existing speakers Check whether your speakers are passive, then compare their nominal impedance and connection requirements with those of the amplifier. If you want to keep your current speakers, finding a suitable match comes first; around 29% of consumers prioritise compatibility and keeping their existing speakers.
Controls while listening Check which controls are available and whether you can adjust the source and volume from where you work. If you want to adjust the music while working on your hobbies without repeatedly interrupting what you’re doing, controls within easy reach of your listening position matter; around 21% of consumers prioritise this.
Connecting additional music sources List the sources you use now and plan to use, then check the output type and suitable input for each one. If you also want to connect, for example, a turntable or CD player, the right input matters; around 14% of consumers prioritise having room for additional sources.

Common pitfalls

  • Treating active speakers as if they were passive

    Active speakers already have a built-in amplifier, so connecting a separate amplifier is not necessarily the right option.

    First establish whether your speakers are active or passive, then check which signal input they have.

  • Confusing Bluetooth with built-in network streaming

    Bluetooth on an amplifier doesn’t automatically mean you can stream directly from an online service. Denon says the PMA-600NE has Bluetooth, while WiiM lists network streaming for the Amp.

    Check that the exact model supports your preferred music service and way of controlling it.

  • Comparing power ratings without checking the test conditions

    The Sony STR-DH190 is rated at 2 × 100 W at 8 ohms, 1 kHz and 1% THD. Yamaha specifies 60 W + 60 W minimum RMS at 8 ohms across 20 Hz–20 kHz for the A-S301. These figures aren’t directly comparable.

    Compare amplifiers using the same measurement method and check that the load is suitable for your speakers.

Brands to consider

WiiM

The WiiM Amp is a compact streaming solution for passive speakers.

  • WiiM lists features including Spotify Connect, TIDAL Connect and AirPlay 2 for the Amp.
  • The Amp and Amp Pro are different models; according to WiiM, the Amp Pro does not have AirPlay 2. Check the features of the exact version.

Denon

According to Denon, the PMA-600NE combines digital and analogue sources with Bluetooth and MM phono.

  • Denon Netherlands specifies 45 W per channel at 8 ohms for this model.
  • Bluetooth isn’t the same as built-in network streaming; check whether you’ll need a separate player for your music service.

Yamaha

The A-S301 is designed for a wired stereo set-up with optical or coaxial digital sources.

  • Yamaha specifies 60 W + 60 W minimum RMS at 8 ohms, measured across 20 Hz–20 kHz, as well as an adjustable loudness control.
  • Only compare the power rating with figures specified under the same test conditions.

Sony

The STR-DH190 is a stereo receiver for anyone looking for analogue sources, phono and Bluetooth.

  • Sony specifies a speaker impedance of 6–16 ohms and 2 × 100 W at 8 ohms, 1 kHz and 1% THD.
  • This power rating isn’t directly comparable with an RMS figure measured across the full frequency range.

Cambridge Audio

According to the manufacturer, the AXA35 is designed for a wired stereo set-up with MM phono and analogue inputs.

  • Cambridge Audio specifies 35 W at 8 ohms and four RCA inputs.
  • The product specification quoted is for the US version; before buying, check that the version on offer is suitable for your market. The manual states that it automatically goes into standby after 20 minutes of inactivity by default.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need a separate stereo amplifier for active speakers?

Usually not to power those speakers: active speakers have a built-in amplifier. Check which signal input they have before connecting other equipment.

Can you simply connect two pairs of speakers?

Don’t assume so just because there are enough speaker terminals. Check the manual and the permitted impedance for the A, B or A+B setting on the exact model you’re using. Sony lists A+B for the STR-DH190, but the suitable load depends on the combination you connect.

What if the amplifier automatically goes into standby during a break?

Check the automatic standby setting in your model’s manual. The Cambridge Audio AXA35 manual states that it goes into standby after 20 minutes of inactivity by default and explains how to change the setting. This doesn’t necessarily apply to other models.

What guarantee and cooling-off period apply when buying online in the Netherlands?

When you buy as a consumer, a product must meet reasonable expectations. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands, and the retailer is your point of contact if something is faulty. When buying remotely from a business, you usually have 14 days to change your mind, although exceptions apply.

Is CE marking required for a stereo amplifier sold in the Netherlands?

Yes. The Netherlands Food and Consumer Product Safety Authority states that CE marking is required for electrical products. Check the marking on the version being offered; a manufacturer’s declaration of conformity is not proof of listening performance.