Who is this buying guide for?

Relaxed shared listener

You want to play folk music in the living room at a volume that suits your housemates, so you’re looking for useful volume controls rather than simply the highest wattage. Yamaha describes the A-S301 as having adjustable loudness; this doesn’t guarantee a particular result in your room.

Owner of passive speakers

You want to keep your speakers, so you check their load and the amplifier’s connections. The Denon manual specifies 4–16 Ω for the PMA-600NE’s speaker connection; this doesn’t automatically apply to other amplifiers.

Listener with multiple sources

You might switch between a phone, a streaming service, a CD player or a turntable, and want to know whether one amplifier has the right inputs for them. Features vary by model: not every amplifier has a phono stage or the same wireless capabilities.

What should you look for when choosing?

Traditional integrated stereo amplifier

Choose this if: you want to use your existing passive speakers and connected sources, and physical controls matter to you.

Bear in mind: which inputs you need; for example, the Cambridge Audio AXA35 doesn’t have built-in network streaming.

Bluetooth amplifier

Choose this if: you regularly want to play music directly from a compatible phone, as well as use connected sources or an MM turntable.

Bear in mind: Bluetooth isn’t the same as built-in network streaming; also check the model’s speaker load.

Streaming amplifier

Choose this if: your housemates want to use supported streaming services and you want to power passive speakers with a single device.

Bear in mind: the supported services and physical inputs; according to WiiM, the WiiM Amp Pro doesn’t receive AirPlay 2.

What to consider What should you check? Who is this important for?
Listening quietly and sharing the volume Try the volume controls at your usual listening level; decide whether you want adjustable loudness or a headphone socket. If I listen at a modest volume in a shared living room, I want to be able to set a comfortable level with my housemates. Around 36% of consumers give relaxed shared listening top priority.
Existing passive speakers Make a note of your speakers’ make, model and impedance; compare these with the manual for the exact amplifier model. I want to keep my passive speakers and check in advance that they’re compatible with the amplifier. Around 29% of consumers put speaker compatibility first.
Music sources and controls Make a note of who chooses the music and which device they use; check the required service, wireless features and physical inputs for each model. If my housemates choose music from their own digital sources, I want to know whether the amplifier supports that way of playing it. Around 21% of consumers give shared access to digital music top priority.
Vinyl and private listening Check whether the turntable has a preamplifier and whether the amplifier has a suitable phono input and headphone socket. I want to connect a turntable or sometimes listen through wired headphones without disturbing anyone else. Around 14% of consumers put vinyl or headphone listening first.

Common buying mistakes

  • Comparing power ratings measured under different conditions

    A rating at 4 Ω and 1 kHz isn’t the same as one at 8 Ω across 20 Hz–20 kHz. For example, Denon specifies 45 W per channel at 8 Ω across 20 Hz–20 kHz and 70 W at 4 Ω and 1 kHz for the PMA-600NE.

    Only compare wattage when the impedance and measurement conditions match, and also check the permitted speaker load for the exact model.

  • Treating Bluetooth, network streaming and AirPlay as the same feature

    The Denon PMA-600NE lists Bluetooth; according to WiiM, the WiiM Amp Pro offers network streaming but doesn’t receive AirPlay 2. A device may offer one way to play music without supporting another.

    Check the music service and control device supported by each model instead of relying on the word ‘wireless’ alone.

    If your preferred way of playing music isn’t supported, you may need a suitable external source or streamer.

  • Assuming every line input is suitable for a turntable

    According to Consumentenbond, a turntable needs a preamplifier, which isn’t always built into the amplifier. Without a suitable phono stage, you may need a separate device.

    First check whether the turntable itself has a preamplifier, then compare its requirements with the type of phono input on the amplifier.

    If neither device has a suitable phono stage, you may need a separate one.

Relevant brands and models

Yamaha

The A-S301 is a traditional amplifier with digital inputs and adjustable loudness.

  • For the A-S301, Yamaha specifies 2 × 60 W minimum RMS at 8 Ω, measured across 20 Hz–20 kHz with 0.019% THD.
  • Adjustable loudness is a control feature, not proof of a particular sound with your speakers.

Denon

The PMA-600NE combines Bluetooth and digital inputs with an MM phono input.

  • The Denon manual specifies 45 W per channel at 8 Ω across 20 Hz–20 kHz with 0.07% THD.
  • Bluetooth on this model isn’t the same as built-in network streaming. The specified speaker load of 4–16 Ω applies to this model; only compare power ratings measured under the same conditions.

WiiM

The Amp Pro combines amplification for passive speakers with network streaming and HDMI ARC.

  • WiiM lists 60 W per channel at 8 Ω and specifies network features and room correction.
  • The specification doesn’t mean that room correction will make an audible difference in your room. WiiM states that the Amp Pro doesn’t receive AirPlay 2.

Cambridge Audio

The analogue-focused AXA35 has connections for connected sources, MM vinyl and wired headphones.

  • Cambridge Audio specifies 35 W per channel and an MM phono stage.
  • According to the manual, the speaker outputs are muted when you plug in headphones. You’ll need a suitable external source for network playback.

Marantz

The MODEL 40n combines amplification with HEOS network control and HDMI ARC.

  • Marantz specifies 70 W per channel and HEOS for this model.
  • Consider whether you need network control and HDMI ARC in your listening space before factoring in these features.

Joybuy products

Related products coming soon.

Frequently asked questions

Should I focus mainly on the highest wattage for acoustic folk?

No. First check that the speaker load is compatible with your speakers, and only compare power ratings measured at the same impedance and under the same conditions. For example, Denon specifies 45 W per channel at 8 Ω across 20 Hz–20 kHz and 70 W at 4 Ω and 1 kHz for the PMA-600NE; those figures aren’t directly comparable.

Can I connect my turntable directly to a stereo amplifier?

It depends on the turntable and amplifier. A suitable preamplifier needs to be built into the turntable or amplifier, or provided by a separate device. According to their manufacturers, the Denon PMA-600NE and Cambridge Audio AXA35 have an MM phono input; also check that it’s compatible with your turntable.

How can I listen on my own when my housemates want some peace and quiet?

Check that the amplifier has a headphone socket that’s compatible with your headphones. According to the manual, plugging in headphones to the Cambridge Audio AXA35 automatically mutes the speaker outputs.

What can I do if my amplifier breaks down too soon?

According to ACM ConsuWijzer, the seller must put a faulty product that has been used normally right at no cost, for example by repairing or replacing it, or refunding you. Your statutory guarantee isn’t limited to the duration of any manufacturer’s or seller’s guarantee; what you could reasonably expect from the product depends on the circumstances.

What are the rules in the Netherlands for handing in an old amplifier?

The Dutch government states that the old-for-new scheme applies to used equipment owned by private individuals, not businesses. Check whether the scheme applies to your circumstances when handing in your old amplifier.