Choose a closed-back broadcast headset if you want to speak close to the microphone while monitoring programme audio during sports commentary; a separate headworn microphone is a good option if you already have a separate way to monitor audio. Check the connections, the included cable and any microphone power requirements for the exact model. Shure recommends positioning the SM10A beside the corner of your mouth, but directional sensitivity and closed earcups are no guarantee against stadium noise or wind.
Who are these set-ups suitable for?
Commentators working in front of a noisy crowd
If you want to record your voice close to your mouth while also hearing commentary or direction, consider the microphone position and whether the headset has closed-back earcups. Audio-Technica, Sennheiser and beyerdynamic describe these features on specific broadcast headsets.
Creators using a recording device
If you use a recorder or mixer, check that both the microphone and headphones work with the connections available. Also check whether power is required and whether the necessary cable is included with the exact model; Audio-Technica, Sennheiser, beyerdynamic and RØDE describe different connections and included items.
Mobile commentators with separate monitoring
If you already have a separate way to monitor audio, you could also consider a separate headworn microphone. According to the Radiocommunications Agency Netherlands, the available frequency spectrum for wireless transmitters in the Netherlands also depends on your location.
What should you look for when choosing?
First decide whether you want to monitor audio through the same set-up while commentating. Then compare the connection and microphone position with your recording equipment and intended location.
| What to consider |
What to look for when buying |
Who is this important for? |
| Keeping your voice clear |
Check the microphone’s pickup pattern and whether the boom can sit beside your mouth. Also consider whether you need closed-back earcups for monitoring. |
If you’re commentating in front of a crowd, you’ll want to capture your voice up close without letting the ambient noise overpower it. Around 36% of consumers give voice clarity their highest priority. |
| Connections and power |
Check the microphone input, headphone output and any power requirements for your device. Check whether the connection cable is included with the specific model. |
If you use your own recorder or mixer, you’ll want to make sure both functions can be connected. Around 29% of consumers prioritise the connection to their recording device. |
| Wind and breath noise |
Check whether a suitable windscreen is included and whether the boom can still be adjusted to sit beside your mouth. |
When commentating outdoors, you’ll want to reduce wind and direct breath noise without positioning the microphone directly in front of your mouth. Around 21% of consumers prioritise wind protection and microphone placement. |
| Monitoring and wearing style |
Decide whether you need a complete headset or already have a separate way to monitor audio. Then compare the earcup design and adjustability of the model you’re considering. |
If you need to hear direction or programme audio while commentating, a complete headset may be practical; if you already monitor audio separately, you could consider a separate headworn microphone. Around 14% of consumers start by deciding between built-in monitoring and a separate microphone. |
Buying pitfalls
-
Checking only the microphone plug
A headset also needs a connection for the headphone signal. Sennheiser states that the connection cable is not included with the HMD 26, and beyerdynamic says the same for the DT 290 MK II. For the RØDE NTH-100M, a suitable adapter with plug-in power may be needed when using an XLR microphone input.
Compare the exact model and box contents with both the microphone and headphone connections on your recorder or mixer.
You’ll need to source the right connection cable separately for the HMD 26 and DT 290 MK II. An XLR connection for the NTH-100M may also require a suitable power adapter.
-
Positioning the microphone directly in front of your mouth
Direct breath can cause plosive sounds. For the Shure SM10A, Shure recommends positioning it beside the corner of your mouth.
Adjust the microphone boom so it sits beside your mouth, then make a test recording to check how your voice, plosives and ambient noise sound.
-
Confusing a separate headworn microphone with a complete headset
The Shure SM10A is a headworn microphone without earcups. If you need to hear programme audio as well, you’ll need a separate monitoring solution.
Before buying, decide whether you need to monitor audio while recording or only capture your voice.
With a separate headworn microphone, you’ll need to arrange monitoring separately if you want to hear audio while commentating.
-
Planning to use a wireless system without checking the location
According to the Radiocommunications Agency Netherlands, the available frequency spectrum varies by location in the Netherlands; some bands require a licence.
Before use, check the exact transmitter system and the available frequency spectrum for your intended location with the Radiocommunications Agency Netherlands.
Some frequency bands may require a licence, so factor in this extra step when preparing your recording.
Brands and models to consider
Audio-Technica
Audio-Technica describes the BPHS1 as a wired broadcast headset suitable for uses including sports commentary.
- According to the product specifications, the BPHS1 has a dynamic cardioid boom microphone, closed-back over-ear cups, a replaceable cable and ear pads, and three windscreens.
- Check that the separate XLR and 6.3 mm connections are compatible with your equipment. The BPHS1-XF4 intercom version has a different plug.
Sennheiser
Sennheiser describes the HMD 26 as a broadcast headset for indoor and outdoor use.
- According to Sennheiser, model 700318 has a dynamic supercardioid microphone, closed-back on-ear cups and a fold-away earcup.
- The manufacturer states that the connection cable is not included in the box. Check the specifications for the exact model; older HMD 26-II versions are not necessarily the same model.
beyerdynamic
The DT 290 MK II is a closed-back broadcast headset with a dynamic microphone; the DT 297 PV MK II is a separate condenser version.
- According to the manufacturer, the 80-ohm version of the DT 290 MK II has a hypercardioid boom microphone and interchangeable connection cables.
- The connection cable must be selected and ordered separately. Check the impedance too: the 80-ohm and 250-ohm versions are different variants.
RØDE
The NTH-100M combines a headset with a detachable microphone and includes a splitter cable for a 3.5 mm set-up.
- According to RØDE, the splitter cable separates the headphone and microphone connections.
- For recording through an XLR microphone input, RØDE says you’ll need an adapter that supplies the required plug-in power. Check that this solution is compatible with your mixer.
Shure
Shure describes the SM10A as a separate wired headworn microphone for close-up speech, including on-location sports commentary.
- According to the manual, the SM10A has a cardioid dynamic capsule, an adjustable boom, a windscreen and an XLR connection. Shure recommends positioning this model less than 25 mm from the corner of your mouth.
- The SM10A is not a complete headset with earcups; arrange monitoring separately if you want to listen in while commentating.
Joybuy products
This selection includes a wireless stereo headset with a flexible microphone boom. Check that its connection and recording inputs are compatible with your equipment and intended use.
No image available
Jabra Evolve2 55 Wireless Stereo Headset, Black
The flexible microphone boom and stereo headset are designed for speaking and listening. Check that the wireless connection and connectivity options are suitable for your recording device.
Wireless stereo headset with flexible microphone boom.
View at Joybuy
Frequently asked questions
Where should you position the microphone when speaking close to it?
Position the microphone beside your mouth, outside the direct flow of your breath, and make a test recording. For the Shure SM10A, Shure specifically recommends placing it less than 25 mm from the corner of your mouth; this guidance applies to that model and is not a universal distance for other microphones.
Can the RØDE NTH-100M connect directly to an XLR microphone input?
Not without the right power solution: according to RØDE, you need a suitable adapter for this connection to provide plug-in power to the headset microphone. The included splitter cable separates the 3.5 mm microphone and headphone connections.
What helps reduce wind noise or plosives?
Position the microphone outside the direct flow of your breath and use a suitable windscreen. Check with a test recording whether this set-up is sufficient for your location; a windscreen does not guarantee that wind noise will disappear completely.
Do you need a licence for a wireless microphone in the Netherlands?
Not always. The Radiocommunications Agency Netherlands lists frequencies that do not require a licence, as well as bands that may require one; the available frequency spectrum also varies by location. If you’re using a wireless transmitter, check the frequency and conditions for your intended location.