Who are these monitors for?

Creator who wants to mix speech accurately

You want to judge how the lesson voice and any other sounds sit together. A consistent listening position matters more than an impressive frequency specification alone. Sound On Sound also discusses how the room affects the sound from studio monitors.

Mixer with a small desk

You need to fit two speakers around your workspace and decide whether a compact pair or separate cabinets will work better in the space available. Genelec points out that positioning and reflections affect what you hear.

Creator with an existing computer or interface

You want to check in advance that your audio source’s outputs match the monitors’ inputs, and whether the product on offer includes one speaker or a stereo pair.

What should you look for?

Compact active stereo pair

A good fit if: you have limited desk space and want a complete pair, possibly with a suitable direct computer connection.

Check: the inputs and included cables. Published frequency limits aren’t directly comparable unless they use the same measurement method.

Two separate nearfield monitors

A good fit if: you can position two cabinets symmetrically and have a source with suitable left and right outputs.

Check: Yamaha and Genelec list the models mentioned here as one monitor per pack, so you’ll need two for stereo.

Analogue DJ monitor set

A good fit if: you want an analogue stereo pair with RCA or 3.5 mm aux connections and controls on the speaker.

Check: Hercules also positions the DJMonitor 42 for DJ use. That doesn’t prove it will suit every spoken-word lesson mix.

What to consider What should you check? Who is this most relevant to?
Judging speech Can you point both cabinets towards your regular listening position from a similar distance and height? Also check the mix on the playback system you intend to use. If I want to hear how the lesson voice and any background sounds sit together, I need to listen from a consistent position; around 36% of consumers prioritise judging speech.
Space for both monitors Measure to check that two cabinets and their cables will fit, and that you can point them towards your listening position. If I have a small or asymmetrical desk, I need to check first that I can position both monitors properly; around 29% of consumers put space and positioning first.
Connection to your audio source Note the outputs on your computer or interface, then check the inputs on the exact model and which cables you’ll need. With an existing computer or interface, I want to avoid finding that the connections don’t match. For around 21% of consumers, compatibility with their audio source is their main buying concern.
Complete stereo pair Check whether the pack contains one monitor or a pair, and which connection cables are included. If I want to listen in stereo straight away, I need to know exactly what’s in the box; around 14% of consumers prioritise buying a complete stereo setup.

Common buying mistakes

  • Comparing the price of one monitor with that of a stereo pair

    Yamaha and Genelec list the HS5 and 8010A respectively as one monitor per pack. The PreSonus Eris 3.5 2nd Gen we reviewed is sold as a pair.

    Compare deals based on a complete stereo setup that you can connect, and check the box contents for the exact version.

    You’ll need two separate monitors for a stereo pair. Also check whether you already have the right connection cables.

  • Directly comparing frequency limits without checking how they were measured

    Manufacturers may specify frequency limits at different dB levels. For example, Yamaha gives the HS5’s limits at −10 dB and −3 dB, while ADAM lists a limit for the D3V at −6 dB.

    Check the measurement level for each frequency figure, and listen to your spoken-word mix in the space where you’ll be working.

  • Assuming room settings can completely fix awkward positioning

    Genelec explains how room reflections and positioning affect what you hear. Room adjustment settings can’t replace a suitable setup.

    First check that you can position both cabinets properly, then see which adjustments the exact model offers.

Brands to consider

ADAM Audio

The D3V is a compact active desktop system with USB-C and balanced TRS inputs. The T5V is a separate nearfield monitor with a rear bass reflex port.

  • ADAM lists desk stands and room adjustment settings as included with the D3V.
  • The stands don’t prove that speech will sound accurate in every room. Bear in mind the T5V’s rear-facing port when positioning it.

PreSonus

The Eris 3.5 2nd Gen is a compact stereo pair for a workspace with suitable analogue outputs.

  • PreSonus lists TRS, RCA and 3.5 mm inputs, tone controls and included cables.
  • The stated frequency response of 80 Hz–20 kHz doesn’t specify a dB measurement level. Don’t compare it directly with figures based on a different measurement method.

Yamaha

The HS5 is a separate active nearfield monitor with analogue connections, designed for a two-cabinet setup.

  • Yamaha lists XLR/TRS inputs and ROOM CONTROL and HIGH TRIM settings.
  • Yamaha says the pack contains one cabinet. The stated frequency limits of 54 Hz at −10 dB and 74 Hz at −3 dB use different measurement methods.

Genelec

The compact 8010A is a separate active monitor with an analogue XLR connection on each cabinet.

  • Genelec lists room compensation switches and dimensions of 195 × 121 × 115 mm including the Iso-Pod.
  • Genelec says the pack contains one monitor. Even with room settings, the room and positioning still affect what you hear.

JBL Professional

The 305P MkII is worth comparing if you’re looking for analogue XLR/TRS inputs and settings to compensate for desk or wall effects.

  • JBL lists Boundary EQ and HF Trim for this model.
  • These manufacturer specifications don’t prove that poor positioning has been corrected or that the model will suit every voice.

Hercules

The DJMonitor 42 is an active analogue stereo set, also positioned for DJ use.

  • Hercules lists RCA and 3.5 mm aux inputs, volume control, and bass and treble knobs; according to the manufacturer, the set contains two satellite speakers.
  • The manufacturer’s claim of clear sound isn’t independent confirmation that the set is suitable for critical mix decisions when working on a spoken-word lesson.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should you position two monitors before assessing your lesson mix?

Point both cabinets towards your regular listening position and aim for a symmetrical setup at equal distances. Genelec recommends starting with an equilateral triangle and explains that room reflections change how the sound is perceived. Check any model settings afterwards.

Do you need a separate amplifier with active monitors?

The active models we reviewed have built-in amplification. You’ll still need an audio source with suitable outputs and, depending on the set you choose and what’s included, connection cables.

How can you check whether you’re buying a stereo pair?

Check the box contents for the exact model before you order. Yamaha lists the HS5 and Genelec lists the 8010A as one monitor per pack; PreSonus sells the Eris 3.5 2nd Gen mentioned here as a pair.

Do online purchases for a workshop always come with a 14-day cooling-off period?

No, this doesn’t automatically apply to every purchase. According to the Dutch government, consumers buying at a distance have a 14-day cooling-off period in many cases. It may make a difference whether you’re buying as an individual or on behalf of an organisation.

What should you check for electrical product safety in the Netherlands?

Check the power supply requirements and the applicable product information for the exact product. The Dutch government says that many, but not all, product groups must carry a CE mark. The manufacturer or importer must establish which requirements apply to that product.