Who is this choice for?

Filming watches with reflective glass

If you want the dial and case to remain clearly visible, assess the light’s position, diffusion and control with the camera set up where you’ll be filming. LOK VISUALS explains how a lighting setup can remain visible as a reflection in a watch.

Filming when you still need a light source

If you want to see how the light falls while filming, compare a continuous-light kit with a separate modifier for a light you already own. NEEWER discusses continuous lighting for video in its own studio lighting guide.

Filming at a small workbench

If space is limited, position the softbox, light and stand so your hands, camera and tools have room. The dimensions listed by amaran and SmallRig for their modifiers can help you work out how much space you’ll need.

What should you look for when buying?

Separate Bowens softbox

Suitable if: you already have a continuous light with a confirmed compatible Bowens mount.

Bear in mind: a separate modifier isn’t a complete lighting kit; check which diffusers and whether a grid are included.

Complete continuous-light kit

Suitable if: you don’t yet have a suitable light and stand, and want to assess how the light falls while filming.

Bear in mind: the kit takes up space, so check the exact version, mount and contents.

Key consideration What should you check? Who should pay particular attention?
Reflections on glass and metal Take a test shot from your final camera angle. Check whether a diffuser and grid are included, and whether you can move the light. If I want to show the dial and case without a large light source dominating the shot, I prioritise control over reflections. Around 33% of consumers consider reflection control their main buying priority.
Continuous light for video Check whether the version includes a continuous light source or just a softbox, and whether the mount is compatible with your light. For a repair video, I want to be able to assess how the light falls while recording. Around 27% of consumers choose continuous light as their main priority.
Space around the workbench Measure the available space beside and above the bench, allowing for the position of the light and stand. At a small workbench, I want to set up the light without getting in the way of my hands, camera or tools. Around 20% of consumers focus on the space needed for the setup.
Compatible, complete contents Check everything in the box, the mount or fitting, and the electrical specifications of the version you’re considering. If I still need other components, I want to know whether the light and stand are included and compatible with the modifier. Around 20% of consumers make having everything they need their main priority.

Common buying mistakes

  • Mistaking a separate softbox for a complete video light

    A separate Bowens modifier and a lighting kit have different contents and mounts.

    Compare the contents of the exact version and check that your existing light is mechanically compatible with the modifier.

  • Assuming soft light removes all reflections

    A softbox or stand can still be clearly reflected in watch glass or polished metal.

    Set up the camera and watch where you’ll be filming and take a test shot. Move or flag the light if the reflection is distracting.

  • Assuming every version of a lighting kit is identical

    The NEEWER NK200 is available in versions with two or three bulbs; the ‘700W’ figure is not a measured power consumption.

    Base your choice on the specifications and box contents of the exact version.

Brands to compare

amaran

The Light Dome 60 is a separate Bowens softbox for use with a compatible light.

  • amaran lists a diameter of 60 cm and includes light-shaping accessories.
  • The softbox isn’t a complete lighting kit; check what’s included with the version you choose.

SmallRig

The RA-D55 is a separate softbox with a Bowens mount.

  • SmallRig specifies a diameter of 55 cm and a foldable design.
  • Check that your light uses a Bowens mount and which accessories are included with the version.

Godox

The SB-FW6060 is a rectangular Bowens softbox with a grid.

  • The official product list distinguishes the SB-FW6060 from other sizes in the SB-FW range.
  • Check the full model number; features of a different size won’t necessarily apply to this version.

NEEWER

NEEWER offers both separate Bowens modifiers and NK200 kits with E27 bulbs.

  • The manufacturer describes options for both a separate modifier and a continuous-light kit.
  • NK200 versions differ in the number of bulbs included; check the version you choose and the manufacturer’s specifications.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a softbox help if the watch glass still reflects white?

First, change the position of the light and camera, then assess a test shot. In a watch setup described by LOK VISUALS, an unwanted reflection remained after a softbox was added; extra diffusion and black flags changed the image. That example relates to flash photography, not a tested video lighting kit.

Can I attach any softbox to any studio light?

No, the mount must be compatible with the exact model. The amaran, SmallRig and Godox modifiers mentioned use Bowens mounts; the lights in the NEEWER NK200 kit mentioned have an E27 fitting.

How should I set up for a repair video?

First, put the camera and watch where you’ll be filming. Then position the light and check the reflections in a test shot. Keep the diffuser and work surface clear of tools, and follow the instructions for assembly, cleaning and electrical use for the version you choose.

What if my light develops a fault or I want to return an online purchase?

In the Netherlands, there is no fixed general statutory warranty period; however, according to the Dutch government, you’re entitled to a product that works properly and should report any fault to the seller. For a standard online consumer purchase, you generally have a 14-day cooling-off period starting the day after delivery. Check the statutory exceptions and any return costs disclosed in advance.

Does an electric studio light need a CE marking to be sold in the Netherlands?

Applicable EU product rules apply to electrical equipment. Business.gov.nl states that, once conformity has been demonstrated, the manufacturer must affix the required CE marking and draw up an EU declaration of conformity; CE is not an independent quality mark. The marking on a light does not prove that a separate passive softbox is subject to the same marking rules.