Who is this setup for?

Makers filming close-ups

You want to show solder joints and techniques clearly, without distracting reflections on metal parts. You can position the softbox to suit your camera angle.

Makers with a small workbench

You need space for a light, stand and camera without blocking access to the circuit board or soldering iron. Dimensions and mounting options are therefore important considerations.

Makers putting together a setup

You’re weighing up a separate light modifier for an existing lamp against a kit with lights and stands, and want to know in advance exactly what’s included.

What should you look for?

Start by checking for reflections from your camera angle, then measure the available space and decide whether you need individual components or a complete kit.

What to consider What to look for Who is it important for?
Reflections and visibility of details Check the shape and position of reflections from your final camera angle; see whether a grid is available for your chosen light modifier. If I’m filming close-ups of solder joints, I want to keep the details visible without distracting glare. Around 33% of consumers give reflection control the highest priority.
Workspace and positioning Measure the available space and the stand’s reach; keep the setup clear of hands, the soldering iron and cables. At a small workbench, I want to fit in the light and camera without blocking access to my work. Around 27% of consumers prioritise clear workspace and positioning.
Light control and recording noise Check the specifications of the exact light and test the lighting and audio in your intended camera setup. Only compare lux values when the measuring distance and light modifier are the same. If I’m filming while soldering and recording an explanation, I look for adjustable continuous light and minimal distracting noise. Around 20% of consumers make recording settings their top priority.
What’s included in the kit Check whether a light, softbox, any adapter, stand, power supply and grid are included. When I’m building a setup from scratch, I want to know which parts I still need. Around 20% of consumers prioritise having a complete setup.

Common buying mistakes

  • Assuming the lux rating reflects output with a softbox

    A quoted light output may have been measured with a specific reflector. That figure doesn’t automatically describe the result you’ll get with a softbox in your filming setup.

    Only compare figures measured under the same conditions, and assess the light from your own camera angle.

  • Mistaking a separate light modifier for a complete lighting kit

    A separate softbox, such as the models mentioned from Godox and SmallRig, doesn’t produce light by itself. A light also doesn’t always come with a softbox or stand.

    Check what’s in the box and the mount used by each component. You may still need a compatible continuous light, adapter or stand.

  • Assuming soft light eliminates all glare

    Even a diffused light source can appear in reflective solder joints or tools.

    Check the image from your final camera angle and move the light if needed.

  • Letting lighting get in the way of fume extraction

    Lighting doesn’t reduce exposure to solder fumes. The UK Health and Safety Executive (HSE) advises using fume extraction when soldering and keeping your head out of the fume plume.

    Position the light and camera so they don’t obstruct the extraction system or access to your work. You may need a separate fume extraction solution.

Brands to consider

Godox

Offers separate Bowens softboxes, including the SB-FW6060, and SL60II continuous lights for those who want to combine components individually.

  • Godox states that the SL60IID has a Bowens mount and a quoted colour temperature of 5600 ± 200 K. For the SL60IIBi, Godox specifies a range of 2800–6500 K.
  • The quoted light output for these lights was measured with a standard reflector; it isn’t a measurement taken with a softbox.

amaran

According to the manufacturer, the COB 60x S is a compact bi-colour continuous light with a Bowens mount; separate light modifiers can be chosen individually.

  • amaran specifies a colour temperature range of 2700–6500 K and stepless dimming from 0 to 100%.
  • The product information lists a reflector and diffuser cap, but no softbox or light stand. Check these components separately.

SmallRig

The LA-O65 is a separate, foldable Bowens softbox designed for use with a compatible light.

  • SmallRig states that two diffusion cloths, a grid and a carry bag are included.
  • It’s a light modifier, not a complete lighting kit. Check that your light and stand are suitable for use together.

Nanlite

The FS-60B is a continuous light with its own FM mount. Nanlite lists a Bowens adapter as included for use with other light modifiers.

  • The adapter can give you more choice of light modifiers if you want to use a Bowens softbox.
  • The quoted 13.360 lux at 1 metre is with the supplied reflector, not a softbox. The package contents reviewed don’t list a softbox or stand.

NEEWER

According to NEEWER, the NL660 kit reviewed combines continuous LED panels with softboxes and stands for a two-light setup.

  • NEEWER lists an adjustable colour temperature of 3200–5600 K, along with two panels, softboxes and stands.
  • The two stands need space around the workbench. According to the product information, batteries aren’t included.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I use a softbox designed for a flash to film a soldering video?

Only if the manufacturer says the softbox is suitable for your continuous light and the mount is compatible. A flash on its own doesn’t provide continuous lighting for the actions in a video.

How should I position the lighting while soldering?

Adjust the softbox while checking the camera view, and keep the light, cloth, stand and cables outside the active work area. Follow the instructions for your chosen light and modifier; there’s no universal minimum distance from a soldering iron that applies here.

Are an adapter, stand or extra light included?

It depends on the kit. The NEEWER NL660 kit reviewed lists two stands and softboxes; Nanlite lists a Bowens adapter with the FS-60B, but no softbox. The amaran COB 60x S is described as coming with a reflector, but no softbox. Check the contents of the exact listing before comparing components.

Does an electric studio light need a CE mark?

The Dutch government states that electrical equipment placed on the EU market must have a CE mark. Check the marking and product information for the exact light; don’t assume it has a mark you haven’t checked on the product.

Does a softbox make soldering safe enough to film indoors?

No. The UK Health and Safety Executive (HSE) warns about solder flux fumes and advises using fume extraction and keeping your head out of the fume plume. This is advice about exposure, not a statement that UK workplace regulations apply directly to every home studio in the Netherlands. Lighting is no substitute for fume extraction.